Ringer Posted January 25, 2021 Share Posted January 25, 2021 For those who shoot these, what's your favorite cleaning method? Link to comment Share on other sites More sharing options...
Chief Rick Posted January 25, 2021 Share Posted January 25, 2021 The few times I used Black MZ - I just used boiling water afterwards. Link to comment Share on other sites More sharing options...
Sedalia Dave Posted January 25, 2021 Share Posted January 25, 2021 Murphys mix to clean and then give everything a light coating of Ballistol. Link to comment Share on other sites More sharing options...
Barry Sloe Posted January 25, 2021 Share Posted January 25, 2021 I use Black MZ in SG. Cleanup - soak the barrels with Windex followed by Breakfree. I use APP in cartridges and my cap & ball. Cleanup is soapy water followed by Breakfree. Take care, BS Link to comment Share on other sites More sharing options...
Silver Sam, SASS #34718L Posted January 25, 2021 Share Posted January 25, 2021 The "Secret Recipe" for Dawge Wizz is equal parts of rubbing alcohol, hydrogen peroxide and Murphys Oil Soap.... water is optional. I keep some in a spray bottle in my Gun Cart..... Been using it over 20 years, Best BP or sub cleaner I've ever tried. Link to comment Share on other sites More sharing options...
Singin' Sue 71615 Posted January 25, 2021 Share Posted January 25, 2021 1 minute ago, Barry Sloe said: I use Black MZ in SG. Cleanup - soak the barrels with Windex followed by Breakfree. I use APP in cartridges and my cap & ball. Cleanup is soapy water followed by Breakfree. Take care, BS Ditto on all my guns with APP. Windex and follow with CLP. Every so often a sinkfull of hot water with Dawn, and a good solid spraydown with CLP and air dry.... Link to comment Share on other sites More sharing options...
Edward R S Canby, SASS#59971 Posted January 25, 2021 Share Posted January 25, 2021 Water works but I use some of the above solutions. Be sure to rinse your brass well as these subs will corrode brass leaving a dark brown tarnish. Link to comment Share on other sites More sharing options...
Warden Callaway Posted January 25, 2021 Share Posted January 25, 2021 I brush out the bore and chambers in the kitchen sink under a light stream of hot water. Then go around the inside of the cylinder opening with a brass brush. I dry and set aside for awhile. Brush and patch again. Then coat with Bore Butter. Link to comment Share on other sites More sharing options...
Singin' Sue 71615 Posted January 25, 2021 Share Posted January 25, 2021 35 minutes ago, Edward R S Canby, SASS#59971 said: Water works but I use some of the above solutions. Be sure to rinse your brass well as these subs will corrode brass leaving a dark brown tarnish. I found that putting brass in super hot water and a dishwater tab over night really gets those BP casings clean! Then a good tumble after drying...they shine!!! Link to comment Share on other sites More sharing options...
Singin' Sue 71615 Posted January 25, 2021 Share Posted January 25, 2021 It really is preference. With Windex, make sure it is plain Windex 'original' and name brand. Others leave a semi-sticky film. I also feel the Murphy mixes do as well, that is my perspective. The biggest thing is to use something to dispurse moisture and lube/oil after. Even if it's just WD40. (Always heard to stay away from alchahol on firearms) Link to comment Share on other sites More sharing options...
Not Dead Ed Posted January 25, 2021 Share Posted January 25, 2021 Anyone use ballistol and water “moose milk”? Link to comment Share on other sites More sharing options...
C.N. Double Posted January 25, 2021 Share Posted January 25, 2021 1 minute ago, Not Dead Ed said: Anyone use ballistol and water “moose milk”? Yep. I rinse everything with plain cold water first, then wipe, then hose it down with ballistol/water (1:3) and wipe again. Link to comment Share on other sites More sharing options...
Eyesa Horg Posted January 25, 2021 Share Posted January 25, 2021 9 minutes ago, Not Dead Ed said: Anyone use ballistol and water “moose milk”? I just started using it on my muzzleloader at the end of the season. Seems to work pretty well. I'm using real BP however. Link to comment Share on other sites More sharing options...
doc roy l. pain Posted January 25, 2021 Share Posted January 25, 2021 1 hour ago, Silver Sam, SASS #34718L said: The "Secret Recipe" for Dawge Wizz is equal parts of rubbing alcohol, hydrogen peroxide and Murphys Oil Soap.... water is optional. I keep some in a spray bottle in my Gun Cart..... Been using it over 20 years, Best BP or sub cleaner I've ever tried. Does it affect the bluing at all Link to comment Share on other sites More sharing options...
Kid Rich Posted January 25, 2021 Share Posted January 25, 2021 Never did for me. kR Link to comment Share on other sites More sharing options...
Eyesa Horg Posted January 25, 2021 Share Posted January 25, 2021 3 minutes ago, doc roy l. pain said: Does it affect the bluing at all I've used it with no affect on bluing that I could see. Used on my C&B pistols, rifle, & muzzleloader. Always used Windex w/vinegar on the SG. Link to comment Share on other sites More sharing options...
doc roy l. pain Posted January 25, 2021 Share Posted January 25, 2021 2 minutes ago, Eyesa Horg said: I've used it with no affect on bluing that I could see. Used on my C&B pistols, rifle, & muzzleloader. Always used Windex w/vinegar on the SG. Just curious. I used windex with vinegar on a pair of ROA’s and must have not wiped it off the cylinders fast enough. It took the bluing partially off Link to comment Share on other sites More sharing options...
Diamond Jake Posted January 25, 2021 Share Posted January 25, 2021 I've shot BP, Pyrodex, 777, Black MZ in various firearms and I always used either plain water or Moose Milk for all of them, followed by a decent rust preventative. Ballistol is my current favorite. Bore Butter as a final coating always resulted in a thin coat of rust, so I don't use that for anything. My traditional muzzleloader round ball rifles I still use human spit for patch lube. Link to comment Share on other sites More sharing options...
Eyesa Horg Posted January 25, 2021 Share Posted January 25, 2021 Just now, doc roy l. pain said: Just curious. I used windex with vinegar on a pair of ROA’s and must have not wiped it off the cylinders fast enough. It took the bluing partially off I must admit I've heard that as well. So I just wipe any off that gets on the bluing of the SG. I don't think it sits long enough on the pistols to be a problem. Not sure however. I just haven't seen an issue. Hopefully someone with more experience will chime in. Link to comment Share on other sites More sharing options...
Guest Posted January 25, 2021 Share Posted January 25, 2021 2 hours ago, Silver Sam, SASS #34718L said: The "Secret Recipe" for Dawge Wizz is equal parts of rubbing alcohol, hydrogen peroxide and Murphys Oil Soap.... water is optional. I keep some in a spray bottle in my Gun Cart..... Been using it over 20 years, Best BP or sub cleaner I've ever tried. Yes, great stuff. Lou Graham turned me on to that mix, and it works like a charm. Link to comment Share on other sites More sharing options...
Tequila Shooter Posted January 25, 2021 Share Posted January 25, 2021 2 hours ago, Warden Callaway said: I brush out the bore and chambers in the kitchen sink under a light stream of hot water. Then go around the inside of the cylinder opening with a brass brush. I dry and set aside for awhile. Brush and patch again. Then coat with Bore Butter. I’m with Warden on this one. Water for bores, hot soapy water for the rest. Rifle and pistols get bronze brushed then dry patch, end with either BB or Ballistol (depending on time of year). SG is just rinse, dry and lube the barrels. I’ve tried the mixes they work well, the only thing I didn’t like on shooting day was the Murphy’s left the guns feeling slippery to me. YMMV Link to comment Share on other sites More sharing options...
Singin' Sue 71615 Posted January 25, 2021 Share Posted January 25, 2021 1 hour ago, Not Dead Ed said: Anyone use ballistol and water “moose milk”? I never aquired a smell for Ballistol. Also feel it leaves a sticky film...but thats me. Link to comment Share on other sites More sharing options...
Abilene, SASS # 27489 Posted January 25, 2021 Share Posted January 25, 2021 24 minutes ago, Singin' Sue 71615 said: I never aquired a smell for Ballistol. Also feel it leaves a sticky film...but thats me. To me, Ballistol has a slight reminder of licorice. I think I am a "supertaster" (more taste buds than usual, makes for some things tasting/smelling more foul than usual). Ballistol actually takes my breath away. But I keep using it because it works so well for various things. I absolutely must have a fan blowing a cross-breeze if I am using it in the house. As for a sticky film, I haven't noticed that on guns, and it leaves your fingers very soft! It is also very good for wood, but don't get on the poly finish that most grips have or it will be very slippery when wet. Link to comment Share on other sites More sharing options...
Singin' Sue 71615 Posted January 25, 2021 Share Posted January 25, 2021 24 minutes ago, Abilene, SASS # 27489 said: To me, Ballistol has a slight reminder of licorice. I think I am a "supertaster" (more taste buds than usual, makes for some things tasting/smelling more foul than usual). Ballistol actually takes my breath away. But I keep using it because it works so well for various things. I absolutely must have a fan blowing a cross-breeze if I am using it in the house. As for a sticky film, I haven't noticed that on guns, and it leaves your fingers very soft! It is also very good for wood, but don't get on the poly finish that most grips have or it will be very slippery when wet. Right? That and Hoppes #9!! Maybe sticky isn't the correct word...but I do feel it. I do strip my grips off and of course remove my shotty barrels. My rifle hasn't been 'taken down' in a long time...just swabs and cycling... Of course we only shoot average of once monthly. CLP can leave a slippery coat too...but I tend to keep a wipe rag...and love hand chalk, even if not shooting duelist! Link to comment Share on other sites More sharing options...
Abilene, SASS # 27489 Posted January 25, 2021 Share Posted January 25, 2021 Hate the smell of Ballistol, but love Hoppes #9 (I thought everybody loved that. ) Link to comment Share on other sites More sharing options...
Diamond Jake Posted January 25, 2021 Share Posted January 25, 2021 35 minutes ago, Abilene, SASS # 27489 said: ... I think I am a "supertaster" (more taste buds than usual, makes for some things tasting/smelling more foul than usual). Ballistol actually takes my breath away. .. I'm the opposite; I never really notice the smell of Ballistol. Link to comment Share on other sites More sharing options...
Abe E.S. Corpus SASS #87667 Posted January 25, 2021 Share Posted January 25, 2021 I’ve tried a couple of different methods but usually very hot water, air dry, then oil with Ballistol. Link to comment Share on other sites More sharing options...
J-BAR #18287 Posted January 25, 2021 Share Posted January 25, 2021 2 hours ago, doc roy l. pain said: Just curious. I used windex with vinegar on a pair of ROA’s and must have not wiped it off the cylinders fast enough. It took the bluing partially off Vinegar removes bluing very quickly as you have proven again. Plain Windex is probably ok but not any better than hot soapy water. Hope you can repair the bluing with quick blue on a Q-Tip, otherwise you can just tell folks you customized your guns. Don’t let mayonnaise from your sandwich drip on your guns; it contains vinegar too! Link to comment Share on other sites More sharing options...
Warden Callaway Posted January 25, 2021 Share Posted January 25, 2021 I actually bought a jug of Ballistol. It was on sale and I figured I'd use it if I ran out of water. Link to comment Share on other sites More sharing options...
Singin' Sue 71615 Posted January 25, 2021 Share Posted January 25, 2021 1 hour ago, Abilene, SASS # 27489 said: Hate the smell of Ballistol, but love Hoppes #9 (I thought everybody loved that. ) If I'd known how much men like that smell, I could have saved so much money!!! Cost of Chanell #5 and Hoppes #9 is considerable Link to comment Share on other sites More sharing options...
doc roy l. pain Posted January 25, 2021 Share Posted January 25, 2021 1 hour ago, J-BAR #18287 said: Vinegar removes bluing very quickly as you have proven again. Plain Windex is probably ok but not any better than hot soapy water. Hope you can repair the bluing with quick blue on a Q-Tip, otherwise you can just tell folks you customized your guns. Don’t let mayonnaise from your sandwich drip on your guns; it contains vinegar too! I actually like it. Gives them a nice aged look! Link to comment Share on other sites More sharing options...
doc roy l. pain Posted January 25, 2021 Share Posted January 25, 2021 I had always used moose milk and someone told me about the windex/vinegar. They didn’t tell me till later that their guns were stainless lol Link to comment Share on other sites More sharing options...
Not Dead Ed Posted January 25, 2021 Share Posted January 25, 2021 32 minutes ago, Singin' Sue 71615 said: If I'd known how much men like that smell, I could have saved so much money!!! Cost of Chanell #5 and Hoppes #9 is considerable You betcha, combine Hoppes#9, leather, campfire, and gunpowder and the guys’ll be running your way! Link to comment Share on other sites More sharing options...
Nate Kiowa Jones #6765 Posted January 25, 2021 Share Posted January 25, 2021 3 hours ago, doc roy l. pain said: Just curious. I used windex with vinegar on a pair of ROA’s and must have not wiped it off the cylinders fast enough. It took the bluing partially off I lived in SE Texas not far from the Gulf and with the humidity there I can watch thing rust. I shoot BP almost exclusively for CAS and one of my guns is an original 92 made in 1895. At the range, I use a 10 to 1 mix of Balistol and water in a spray bottle to keep thing loose in all my guns and when I`m through for the day I spray them all inside and out one last time because sometimes I don`t get around to cleaning for several days. All this does is keep the fouling loose and oily until I can clean the guns. When it`s time to clean I use two primary products that are readily available. I use Windex Multi-Surface Cleaner with Vinegar. I don't use it straight. I mix this half and half with water . This is the clear Windex but regular Windex will work if you add a table spoon of vinegar. The vinegar is important because it is slightly acidic and helps neutralize the salts in the BP. Next you flush with hot water. This is how you nuetralize the vinegar. Never the other way round. Vinegar on hot parts will remove the bluing. I have tried some of the other methodes that don't use the neutralizing agent such as vinegar and they do OK for short term storeage but eventually the left-over salts will cause rust. Next is flushing the moisture out Frirst, not all brake parts cleaners are the same. Some are harsh enough to damage plastic parts and finishes. If you aren't certain the product is safe then just purchase Birchwood Casey Gun Scrubber Synthetic Safe Cleaner. I have never experience damage to any gun parts or finish using it. For that reason, many years ago I contacted a manufacturer of a brake parts cleaning product sold by Autozone and ask them how it compared to the B-C Gunscrub. Comparing the ingredients they told me it was the same thing as their non-chlorinated Brake parts cleaner. This product made by Albany Brake parts company, packaged in Lafayette La. was sold at store. But, since that time Autozone has it packaged with their name on it. I buy this stuff by the case to use on my customers guns. A word of caution, I don't use Carb cleaners. Some Carburetor cleaners are caustic. They can be too harsh on wood finishes and plastic parts. Link to comment Share on other sites More sharing options...
J-BAR #18287 Posted January 26, 2021 Share Posted January 26, 2021 38 minutes ago, doc roy l. pain said: I actually like it. Gives them a nice aged look! I am the original "gun ruiner", having antiqued several pairs of revolvers. Surely you have seen my "ruined" ROAs, but if not, I will post them again! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.