What do you call it?

[Alpo 2,229]

 

Wiki says that's a TIRE IRON.

 

Around here we'd call that a JACK HANDLE. At least back when I was growing up. Now it seems all cars come with screw jacks, so don't have a handle.

 

Book I'm reading. Scotsman. And they make a point of his being Scot, with his "aye" and "lass". He just asked if the "lass" had a torch, and she responded that, "this is the twenty first century - we don't use torches, we use flashlights".

 

Then he asked if she had a tire iron.

 

Hmmm. Do they call them tire irons in the UK? If they did it would be tyre irons , but DO they?

 

Or do they use another term altogether?

[Forty Rod SASS 3935 2,674]

1 hour ago, Alpo said:

 

Wiki says that's a TIRE IRON.

 

Around here we'd call that a JACK HANDLE. At least back when I was growing up. Now it seems all cars come with screw jacks, so don't have a handle.

 

Book I'm reading. Scotsman. And they make a point of his being Scot, with his "aye" and "lass". He just asked if the "lass" had a torch, and she responded that, "this is the twenty first century - we don't use torches, we use flashlights".

 

Then he asked if she had a tire iron.

 

Hmmm. Do they call them tire irons in the UK? If they did it would be tyre irons , but DO they?

 

Or do they use another term altogether?

It's an a--hole alignment tool.  I've used one to straighten out a few people in my time.  I can be used for other things as well.

[Subdeacon Joe 11,030]

That is a tire iron.

 

[Finagler 6853 Life 193]

I've heard it called both a tire iron and a jack handle or as 40 Rod says, an attitude adjuster.  I've referred to some worthless shotguns as jack handles but those are floor jacks as you mention.  It is all in your perspective.

[Sedalia Dave 4,208]

I have heard that particular item called a lot of things that are not repeatable here on the wire. The only use it is perfectly suited for is as an attitude adjuster.

[Cactus Jack Calder 134]

38 minutes ago, Subdeacon Joe said:

That is a tire iron.

 

+1

In the East, at least in Jersey, it was referred to as a TIRE IRON!

The socket end obviously for lug nuts. The pointy end used to pry the tire off the wheel, once the bead is broken.

BTDT. 

 

CJ

[Wrangler Rich SASS #42157 14]

Lug wrench, tire iron, jack handle, attitude adjuster, it can be call a number of things, but it also took the hubcaps off....

[Cactus Jack Calder 134]

Wrangler,

Yep I forgot about hubcaps. Haven’t had one in so long they slipped my mind, what is left of it.

[LawMan Mark, SASS #57095L 423]

Technically, a tire iron is a tool made to remove and install a tubeless tire on a rim.  That said, we called a L shaped device with a socket on one end and a flattened tip on the other a tire iron or a lug wrench when i was growing up.  Most of us had a "4 way" lug wrench, as beyond having different sizes, it was easier to manipulate than the L shaped version.  

 

The L shaped version also was used as the jack handle for a bumper jack.  My first two trucks had bumper jacks.  They were about as dangerous an implement as I ever used.  

[SOUTH-PACIFIC,SASS #59402 14]

i would say the proper word would be a tire iron. if i am correct a lug wrench would be the 4 way wrench. the tire iron was for each size of lugs  and as mentioned was used for many applications

 

[Marshal Mo Hare, SASS #45984 3,258]

The original question was what was it called in the UK.  I have found an answer that it is a tyre lever, rhymes with weaver, not clever.  Of course since I found this info on the internet, it’s about as reliable as a Lada or Yugo.

[Major Crimes 1,455]

We also call them a Wheel Brace

[BLACKFOOT SASS #11947 275]

I call it a lug wrench,  it also has many other uses that have been mentioned.  It addition to removing lug nuts and hub caps they do well as a personal defense device. 

Blackfoot

 

[Pat Riot, SASS #13748 9,031]

Lug wrench:

https://www.google.com/search?q=lug wrench&tbm=isch

 

Tire Iron:

https://www.google.com/search?q=tire iron&tbm=isch

 

Attitude adjuster: this made me laugh...

https://www.google.com/search?q=attitude adjuster&tbm=isch

 

My Dad actually referred to them as a lug wrench when changing a tire and a tire iron when he planned to use it for attitude adjustment.

I call them “useless knucklebusters”

 

and this was a 

[Stogie 44]

On 2/7/2019 at 10:03 AM, Cactus Jack Calder said:

+1

In the East, at least in Jersey, it was referred to as a TIRE IRON!

The socket end obviously for lug nuts. The pointy end used to pry the tire off the wheel, once the bead is broken.

BTDT. 

 

CJ

Or the flat end to remove hubcaps, back when cars had hubcaps.

[Cheyenne Ranger, 48747L 1,209]

On 2/7/2019 at 9:35 AM, LawMan Mark, SASS #57095L said:

Most of us had a "4 way" lug wrench

 

I knew I was 'big time' when I could spin one of these while removing/installing the lug nuts.  Just like the pros did at the garage.

[Matthew Duncan 430]

On 2/7/2019 at 10:03 AM, Cactus Jack Calder said:

+1

In the East, at least in Jersey, it was referred to as a TIRE IRON!

The socket end obviously for lug nuts. The pointy end used to pry the tire off the wheel, once the bead is broken.

BTDT. 

 

CJ

Pointy end is for prying off the hubcap off...

[Clueless Bob 75]

According to Smokin’ Limey, she always called it a “Tyre Wrench”.  She does say that those “Up North” have some funny words and cannot say for sure.

[Four-Eyed Buck,SASS #14795 293]

Had many an unpleasant occurrence with the L shaped device. My favorite to use when dealing with tire/wheel removal is the "four way". If a lug is sticky, being able to use a foot on one of the bars is a plus.

[Smuteye John SASS#24774 1,044]

Jack handle.

 

I've only used on as a lug wrench ONCE.  I was 19 and weighed all of 145 pounds at the time.  Wasn't strong enough to break the lugs loose by hand and was so light I had to stand on the thing and bounce. 

 

After that level of struggling, I went down to the auto parts store and bought a 4 way lug wrench.  I keep one in the vehicles and bought one for my nieces's vehicles when they started driving.