Rip Snorter Posted December 2, 2023 Share Posted December 2, 2023 https://www.breitbart.com/2nd-amendment/2023/12/01/remington-closing-new-york-plant-opened-1828/ Link to comment Share on other sites More sharing options...
Dirty Dan Dawkins Posted December 2, 2023 Share Posted December 2, 2023 Not surprising…. Link to comment Share on other sites More sharing options...
Blackwater 53393 Posted December 2, 2023 Share Posted December 2, 2023 Another historic business that has been in New York for nearly two centuries has finally arrived at the conclusion that they are no longer welcome there and is moving to a place where they are welcome and wanted! I really feel sorry for their employees and their families. I also hope that those people and those in other businesses in that community that have been negatively affected by this sad situation will remember who it was that caused the move when election time rolls around again!! Link to comment Share on other sites More sharing options...
Cholla Posted December 2, 2023 Share Posted December 2, 2023 Wouldn't that be 200 years after opening? Link to comment Share on other sites More sharing options...
Cold Lake Kid, SASS # 51474 Posted December 2, 2023 Share Posted December 2, 2023 I guess some officials still haven't learned about the consequences of ones actions. Or maybe this is exactly what they wanted. Link to comment Share on other sites More sharing options...
watab kid Posted December 2, 2023 Share Posted December 2, 2023 always sad when old gun works go away , but such has been the way for ever , the sader thing is when these legendary american gun producers are bought up by foreign makers to me , Link to comment Share on other sites More sharing options...
Badlands Bob #61228 Posted December 2, 2023 Share Posted December 2, 2023 I don't see why any firearm companies still manufacture in the Northeast. Link to comment Share on other sites More sharing options...
Capt. R. Hugh Kidnme Posted December 2, 2023 Share Posted December 2, 2023 9 hours ago, Cholla said: Wouldn't that be 200 years after opening? It's news reporting....there is no longer a need to be accurate, just fast. Now what was it that Wyatt Earp said about that.............? Link to comment Share on other sites More sharing options...
Pat Riot Posted December 2, 2023 Share Posted December 2, 2023 I got an email yesterday that said THIS There is a Video on YouTube you can check out. Link to comment Share on other sites More sharing options...
Bingo Montana Posted December 2, 2023 Share Posted December 2, 2023 "Georgia, a state that supports and welcomes the firearms industry" Link to announcement: https://youtu.be/jGvnEl6GqWQ?si=OrZUQ4YsFSSmq7zn Link to comment Share on other sites More sharing options...
Cypress Sun Posted December 2, 2023 Share Posted December 2, 2023 Just remember that any and all States are just ONE election cycle from becoming a New York, California, New Jersey and multiple other States. Vote accordingly and encourage others to vote accordingly. Link to comment Share on other sites More sharing options...
Dirty Dan Dawkins Posted December 2, 2023 Share Posted December 2, 2023 2 hours ago, Badlands Bob #61228 said: I don't see why any firearm companies still manufacture in the Northeast. Believe it or not, those states are filled with red blooded, God fearing, constitution loving Americans that would love nothing more than to preserve their industry, history and heritage. I’m heading to one soon for late muzzleloading season in Gods country- the Adirondacks. It was Republicans and conservatives that once controlled these areas, and it is they which lost them, and it is they which reinforced and expanded the funding to public education which has resulted in the indoctrination of tens of millions of kids for the cultural and ideological shift we witnessed. All the while, they focused on guns (military expansion) and money. Instead, they spent post WWII building capital ,not community; not reinforcing values, but instead abdicating duty and responsibility, instead going about trumpeting contrived scares, building the military-industrial complex Ike warned us about; and in engaging in and creating the never ending foreign entanglements Jefferson cautioned us of. All the while, they actively collaborated with the Democrats in fleecing the middle class of jobs and prosperity in the name of insuring personal and political gain for all of bureaucracy, while propping up despotic governments abroad that served to enhance the power and influence of global puppeteers. No gentlemen, this plant closure is just another patch in the asphalt paving the road for this country to reach the socialist hell world leaders have been drooling for us to become. We’ll more and more resemble Canada and Australia in future decades as “leadership” continues to sell us out. The day men in politics point out, apologize for, disavow, and commit to reversing these affronts to our nation, our heritage, and our freedom, I’ll have a better feeling about who I vote for. Link to comment Share on other sites More sharing options...
Rye Miles #13621 Posted December 2, 2023 Share Posted December 2, 2023 We're not exactly Northeast here in Ohio, we're considered Midwest but we do have a firearm company right here in Mansfield Ohio. Lots of people love these affordable guns. Actually the High Point carbine is pretty nice and reliable as well. https://www.hi-pointfirearms.com/hi-point-carbines/hi-point-10mm-carbine.php https://www.hi-pointfirearms.com/about-hi-point-firearms/about-hi-point-firearms.php Link to comment Share on other sites More sharing options...
Eyesa Horg Posted December 2, 2023 Share Posted December 2, 2023 SASS thinks you are the Northeast. Or the Northeast Regional would actually be in the real Northeast as it was for years. Maybe we can have the Midwest regional here. Link to comment Share on other sites More sharing options...
Cypress Sun Posted December 2, 2023 Share Posted December 2, 2023 31 minutes ago, Rye Miles #13621 said: We're not exactly Northeast here in Ohio, we're considered Midwest but we do have a firearm company right here in Mansfield Ohio. Lots of people love these affordable guns. Actually the High Point carbine is pretty nice and reliable as well. https://www.hi-pointfirearms.com/hi-point-carbines/hi-point-10mm-carbine.php https://www.hi-pointfirearms.com/about-hi-point-firearms/about-hi-point-firearms.php I had a 9mm one. Shot it once. Everything fed just fine, no ejection problems, no nothin'. Then I read the instructions for cleaning disassembly...ran a bore snake down the barrel and sold it. Link to comment Share on other sites More sharing options...
Rye Miles #13621 Posted December 2, 2023 Share Posted December 2, 2023 Was it a handgun or a carbine ? I know that’s a problem with the handguns for sure! Link to comment Share on other sites More sharing options...
Cypress Sun Posted December 2, 2023 Share Posted December 2, 2023 Just now, Rye Miles #13621 said: Was it a handgun or a carbine ? I know that’s a problem with the handguns for sure! Carbine w/4 factory mags. Got it cheap. No way that I was going use that much effort to take it apart just for a clean and lube. Gotta say though...it worked as advertised! Link to comment Share on other sites More sharing options...
Texas Joker Posted December 2, 2023 Share Posted December 2, 2023 You don't take a high point down for cleaning. Bore snake and sprays then wipe it off. If it won't work send it back. They hit the factory restore button and return it to you. High points are more robust and reliable than an ak. But the ak has better ergonomics and visual appeal. Link to comment Share on other sites More sharing options...
Pat Riot Posted December 2, 2023 Share Posted December 2, 2023 I am glad Rem Arms is moving. Screw New York politics. Before Remington went bankrupt I purchased an R51 9mm and an RM380. The RM380 was fantastic. It fired everything I tried and very reliably. The R51 was a POS. Remington’s quality control was crap. Totally mismanaged. Since they have re-formed I have seen a few of their rifles and shotguns. They appear to be very well made. I hope they do well in Georgia. Link to comment Share on other sites More sharing options...
Dantankerous Posted December 2, 2023 Share Posted December 2, 2023 29 minutes ago, Pat Riot said: Screw New York politics. I modified your quote to be the most poignant part of it. Link to comment Share on other sites More sharing options...
J.D. Daily Posted December 2, 2023 Share Posted December 2, 2023 On 12/2/2023 at 11:05 AM, Cypress Sun said: Carbine w/4 factory mags. Got it cheap. No way that I was going use that much effort to take it apart just for a clean and lube. Gotta say though...it worked as advertised! Have you ever tried to disassemble & reassemble Ruger Mark I, II or III? The process is a PITA!!. I've owned one for over 20 years and have taken it down once to thoroughly clean. If it weren't for a 3rd party recently offering a modification that prevents the hammer strut from going behind the pin in the grip frame I would never do more than clean the bore & breech face. It was well worth the $30 bucks I paid. Link to comment Share on other sites More sharing options...
Rip Snorter Posted December 2, 2023 Author Share Posted December 2, 2023 Haven't got one at the moment, so I can't verify my recollection, but turning it upside down for insertion of the final part made things a lot easier. Link to comment Share on other sites More sharing options...
Gungadin Posted December 2, 2023 Share Posted December 2, 2023 I love my MK III Hunter. It teaches patience. See there are some prerequisites before you have kids. Get married, get a dog, then a Ruger MKIII. Then you are ready for kids. I have the Youtube video on reassembly saved. Link to comment Share on other sites More sharing options...
Cypress Sun Posted December 2, 2023 Share Posted December 2, 2023 2 hours ago, J.D. Daily said: Have you ever tried to disassemble & reassemble Ruger Mark I, II or III? The process is a PITA!!. I've owned one for over 20 years and have taken it down once to thoroughly clean. If it weren't for a 3rd party recently offering a mode that prevents the hammer strut from going behind the pin in the grip frame I would never do more than clean the bore & breech face. It was well worth the $30 bucks I paid. Those never bothered me except for the possibility of missing with the rubber mallet and hitting the sights. Where did you purchase the 3rd party part, if you don't mind me asking? Link to comment Share on other sites More sharing options...
J.D. Daily Posted December 2, 2023 Share Posted December 2, 2023 6 minutes ago, Cypress Sun said: Those never bothered me except for the possibility of missing with the rubber mallet and hitting the sights. Where did you purchase the 3rd party part, if you don't mind me asking? At this URL https://www.hammerstrutsupport.com/ Link to comment Share on other sites More sharing options...
Cypress Sun Posted December 3, 2023 Share Posted December 3, 2023 8 minutes ago, J.D. Daily said: At this URL https://www.hammerstrutsupport.com/ Thanks a bunch! Just ordered one...$24 to make life easier, oh hell yeah. Link to comment Share on other sites More sharing options...
Rooster Ron Wayne Posted December 3, 2023 Share Posted December 3, 2023 The Wrighting has been on the wall for years . America is selling itself out for the mighty dollar ! What can I get Now is all they see. Link to comment Share on other sites More sharing options...
Rip Snorter Posted December 3, 2023 Author Share Posted December 3, 2023 If the current regime manages to cheat another one, the Constitution, the Bill of Rights and Freedom are all over. Currently they are just ignoring them, declaring endless "Emergencies". Link to comment Share on other sites More sharing options...
.thumb.jpg.42f9340f5815e3915f9a0b0991f5aa8f.jpg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.