Gray Drifter Posted April 11, 2019 Share Posted April 11, 2019 Hello everyone, greenhorn to CAS here. I was curious if your pistol pair must be the same make and model? Link to comment Share on other sites More sharing options...
Tyrel Cody Posted April 11, 2019 Share Posted April 11, 2019 Welcome to the best game there is! No they don't, don't even have to be the same caliber; but it's a really really good idea for them to be the same caliber. Link to comment Share on other sites More sharing options...
Laramie Posted April 11, 2019 Share Posted April 11, 2019 Heck no! Variety is the spice of life! Link to comment Share on other sites More sharing options...
Gray Drifter Posted April 11, 2019 Author Share Posted April 11, 2019 1 minute ago, Tyrel Cody said: Welcome to the best game there is! No they don't, don't even have to be the same caliber; but it's a really really good idea for them to be. Thank you sir! The benefits of which are obvious, I just could not find an answer anywhere. Link to comment Share on other sites More sharing options...
Michigan Slim Posted April 11, 2019 Share Posted April 11, 2019 I like them the same just for the same grip type between them. I shoot either .44 Super Blackhawks or .38 Vaqueros. My rifle is .38 Link to comment Share on other sites More sharing options...
Chuck Would, SASS # 53289 Posted April 11, 2019 Share Posted April 11, 2019 The short answer is no. The longer answer is still no, but. The same calibers on both pistols would be recommended. Makes it much easier at the loading table. I have a pard who shoots both .45 - in his pistols - and .44-40 in his rifle. It is possible to load the right ammo into the wrong firearm. Its one of the reasons that loading blocks or Strips are available. The other reason is ease of reloading. Most of us reload our ammo. Using the same caliber for pistols and rifles means that you're buying not as many components. Different powders, different brass. Link to comment Share on other sites More sharing options...
Tyrel Cody Posted April 11, 2019 Share Posted April 11, 2019 3 minutes ago, Chuck Would, SASS # 53289 said: The short answer is no. The longer answer is still no, but. The same calibers on both pistols would be recommended. Makes it much easier at the loading table. I have a pard who shoots both .45 - in his pistols - and .44-40 in his rifle. It is possible to load the right ammo into the wrong firearm. Its one of the reasons that loading blocks or Strips are available. The other reason is ease of reloading. Most of us reload our ammo. Using the same caliber for pistols and rifles means that you're buying not as many components. Different powders, different brass. Methinks you misunderstand his question. He's asking about make and model; not caliber. Some of us just added that in as a "good idea". Link to comment Share on other sites More sharing options...
Chuck Would, SASS # 53289 Posted April 11, 2019 Share Posted April 11, 2019 1 minute ago, Tyrel Cody said: Methinks you misunderstand his question. He's asking about make and model; not caliber. Some of us just added that in as a "good idea". OK. You're right. I got mislead when someone else mentioned caliber. Link to comment Share on other sites More sharing options...
Eyesa Horg Posted April 11, 2019 Share Posted April 11, 2019 From my initial experience; I would (no pun on the guy above!) try to keep both the same model. I started with one vaquero style grip and one bisley style and found it hard to get used to as they both hold/aim differently. I'm running Ruger New Model Vaquero's now. Both in .45 as I like the big hole. The wife likes the .38's. We kept rifle and pistol calibers the same just for ease of operation and no chance of a screw up at the loading table. Have fun! Link to comment Share on other sites More sharing options...
J-BAR #18287 Posted April 11, 2019 Share Posted April 11, 2019 Both revolvers must conform to any category restrictions. Some categories require fixed sight revolvers, so both would have to have fixed sights to shoot in those categories, not just one. Frontiersman requires both revolvers to be fixed sight percussion guns, but obviously one could be an 1851 Navy and the other an 1860 Army, or 1858 Remington, or a Ruger Old Army, etc. Link to comment Share on other sites More sharing options...
Kirk James Posted April 11, 2019 Share Posted April 11, 2019 Get started and rest will work itself out. Good luck and let us know how it works out. You should not have any problem. I a have seen shooters with different barrel lengths that shoot fine. If you just want to have fun, have fun with what you have. Link to comment Share on other sites More sharing options...
Noz Posted April 11, 2019 Share Posted April 11, 2019 Somebody used to shoot a 3"Shopkeeper on one side and a Buntline on the other. CRS, no name comes to me. Link to comment Share on other sites More sharing options...
Cactus Mike Posted April 12, 2019 Share Posted April 12, 2019 Matching calibers is just a good idea, but that’s to facilitate easy loading. The guns don’t have to be related. I started with two mismatched Vaqueros. Both in .44 Magnum, but one is 4.62” and one is 5.5”. One is stainless and one is case colored and blued. One is a Bisley grip and one is not. One has Sambar stag grips and one has buffalo horn grips. I’ve since bought two matching New Model Vaqueros in .357, but that’s because I want to shoot .38 Special, not because the mismatch bothers me. Link to comment Share on other sites More sharing options...
Equanimous Phil Posted April 12, 2019 Share Posted April 12, 2019 There was a quite similar thread a few weeks ago about matching revolvers: Cheers, Equanimous Link to comment Share on other sites More sharing options...
H. K. Uriah, SASS #74619 Posted April 12, 2019 Share Posted April 12, 2019 6 hours ago, Equanimous Phil said: There was a quite similar thread a few weeks ago about matching revolvers: Cheers, Equanimous Now I have to laugh. Those are my pistols! Since it's cropped, here's the full pic... Believer it or not, I have never shot the 2 Sheriff's at the same time. but I do occasionally pair the 2 nickel guns for contrast. Link to comment Share on other sites More sharing options...
Imis Twohofon,SASS # 46646 Posted April 12, 2019 Share Posted April 12, 2019 Have to- no. Easier-Yes Variety-style points- priceless, oh yes And get yourself a good hat Imis Link to comment Share on other sites More sharing options...
Warden Callaway Posted April 12, 2019 Share Posted April 12, 2019 Here is the pair I shot in first match last weekend. They don't match. Probably accounted for me shooting 60 second stages. Link to comment Share on other sites More sharing options...
LostVaquero Posted April 12, 2019 Share Posted April 12, 2019 Not going to add anything but welcome and a big Minnie Pearl style HOWDEEE!!!! Link to comment Share on other sites More sharing options...
watab kid Posted April 13, 2019 Share Posted April 13, 2019 no - a lot of us obviously mismatch for all sorts of reasons , i started that way because of funds and sometimes still am because i like it , Link to comment Share on other sites More sharing options...
Croc Holiday Posted April 13, 2019 Share Posted April 13, 2019 Matching is absolutely critical. Unless, they’re different enough that there’s no way they were intended to be a pair. Then that’s okay. But I am weird about that kind of stuff. Unmatched = unsettling for me haha. Link to comment Share on other sites More sharing options...
Guest Texas jack Black SASS#9362 Posted April 13, 2019 Share Posted April 13, 2019 Before I bought anything I would go to a match watch, ask questions sit back and ask yourself where do I want to go with this game then act accordingly. The meat in this game will be discovered at the matches not on the wire.IMHO Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.