Subdeacon Joe Posted May 11, 2022 Share Posted May 11, 2022 Link to comment Share on other sites More sharing options...
Rye Miles #13621 Posted May 11, 2022 Share Posted May 11, 2022 My dad worked on a screw machine at the place he worked at. (Parker Hannifin)He bid on different jobs but he liked the screw machine for whatever reason! Link to comment Share on other sites More sharing options...
Marshal Mo Hare, SASS #45984 Posted May 11, 2022 Share Posted May 11, 2022 Back about the turn of the Century, no not the recent one, the one before the internet, governments around the world took notice and started to get worried about, well, so much screwing and it was all incompatible. Thus was formed the International Committee to Standardize the Screw. They had meetings, they published papers, wrote everything down, and after several years, never really did anything. After a time Congress decided to no longer fund anyone to attend their meetings. Well, I think it was the Navy that decided it was still something that was needed and funded a representative to attend the meetings. Link to comment Share on other sites More sharing options...
Trailrider #896 Posted May 11, 2022 Share Posted May 11, 2022 Christpher Spencer...yeah that one...apparently invented or developed the automatic screw machine many years after the rifle. He lived long enough that his son even took the father flying, and maybe even taught him to fly an airplane! Link to comment Share on other sites More sharing options...
Chickasaw Bill SASS #70001 Posted May 11, 2022 Share Posted May 11, 2022 when ya got a big hammer , everything looks like a nail CB Link to comment Share on other sites More sharing options...
Subdeacon Joe Posted May 11, 2022 Author Share Posted May 11, 2022 5 hours ago, Rye Miles #13621 said: My dad worked on a screw machine at the place he worked at. (Parker Hannifin) My place of employment does a lot of business with their Rohnert Park facility making parts for some of their linear motors. Link to comment Share on other sites More sharing options...
Father Kit Cool Gun Garth Posted May 11, 2022 Share Posted May 11, 2022 @Subdeacon Joe, Link to comment Share on other sites More sharing options...
Rip Snorter Posted May 11, 2022 Share Posted May 11, 2022 But is it a turn for the better or a turn for the worse? Link to comment Share on other sites More sharing options...
Father Kit Cool Gun Garth Posted May 11, 2022 Share Posted May 11, 2022 5 minutes ago, Rip Snorter said: But is it a turn for the better or a turn for the worse? Link to comment Share on other sites More sharing options...
Pat Riot Posted May 11, 2022 Share Posted May 11, 2022 C’mon guys! Quit screwing around! This is serious stuff. Don’t be twisting this thread into something completely different. Link to comment Share on other sites More sharing options...
Blackwater 53393 Posted May 11, 2022 Share Posted May 11, 2022 C’mon Pat!! This thread has taken an interesting turn!! Link to comment Share on other sites More sharing options...
Trailrider #896 Posted May 11, 2022 Share Posted May 11, 2022 So are we blaming Achamedes for this screwed up world? Link to comment Share on other sites More sharing options...
Rip Snorter Posted May 11, 2022 Share Posted May 11, 2022 The plane fact, is I think, Galileo. Nope! Internet over memory. Archimedes indeed. Link to comment Share on other sites More sharing options...
Marshal Mo Hare, SASS #45984 Posted May 11, 2022 Share Posted May 11, 2022 It’s all very twisted. Link to comment Share on other sites More sharing options...
Crooked River Pete, SASS 43485 Posted May 11, 2022 Share Posted May 11, 2022 Personally I think you guys are nuts. Link to comment Share on other sites More sharing options...
Wallaby Jack, SASS #44062 Posted May 11, 2022 Share Posted May 11, 2022 ..... in this screwed-up world, ..... I think I'm a left-hand thread .... Link to comment Share on other sites More sharing options...
Rye Miles #13621 Posted May 11, 2022 Share Posted May 11, 2022 I think you guys need a good Screwdriver Link to comment Share on other sites More sharing options...
Kulshan 20262 Posted May 11, 2022 Share Posted May 11, 2022 2 hours ago, Wallaby Jack, SASS #44062 said: ..... in this screwed-up world, ..... I think I'm a left-hand thread .... No Wallaby, but you might be a seven sided cross-threaded nut. Link to comment Share on other sites More sharing options...
Buckshot Bear Posted May 11, 2022 Share Posted May 11, 2022 Now we just need America to go metric and drop UNC, UNF, UNEF, UNS and whatnot and GET WITH THE PROGRAM!!!!!! Link to comment Share on other sites More sharing options...
John Kloehr Posted May 11, 2022 Share Posted May 11, 2022 23 minutes ago, Kulshan 20262 said: No Wallaby, but you might be a seven sided cross-threaded nut. Well, this is Wallaby Jack. Even a seven sided cross-threaded nut can be loosened with a pair of Vice Grips and a Monkey Wrench. A Hot Wrench would make it quicker, but I can't find a recipe for the liquor. Link to comment Share on other sites More sharing options...
Subdeacon Joe Posted May 12, 2022 Author Share Posted May 12, 2022 52 minutes ago, Buckshot Bear said: Now we just need America to go metric and drop UNC, UNF, UNEF, UNS and whatnot and GET WITH THE PROGRAM!!!!!! You ain't had fun until you have to 3-Wire a M385 X 0.5 thread while the part is still in the lathe. Threaded length was only about 12mm. Used .018" wires and 40 inch calipers. Fun times. Link to comment Share on other sites More sharing options...
Buckshot Bear Posted May 12, 2022 Share Posted May 12, 2022 5 minutes ago, Subdeacon Joe said: You ain't had fun until you have to 3-Wire a M385 X 0.5 thread while the part is still in the lathe. Threaded length was only about 12mm. Used .018" wires and 40 inch calipers. Fun times. What was that for? Link to comment Share on other sites More sharing options...
Smuteye John SASS#24774 Posted May 12, 2022 Share Posted May 12, 2022 1 hour ago, Buckshot Bear said: Now we just need America to go metric and drop UNC, UNF, UNEF, UNS and whatnot and GET WITH THE PROGRAM!!!!!! Yeah! How else do you expect to go to the Moon- oh, wait. How else do you expect to break the speed of sound in level fli- no, that's a bad example, too. Well, the French invented it, so..... Never mind, forget it! Link to comment Share on other sites More sharing options...
Buckshot Bear Posted May 12, 2022 Share Posted May 12, 2022 4 minutes ago, Smuteye John SASS#24774 said: Yeah! How else do you expect to go to the Moon- oh, wait. LOL copied from the German WII missile program....it was Metric Link to comment Share on other sites More sharing options...
Crooked River Pete, SASS 43485 Posted May 12, 2022 Share Posted May 12, 2022 13 minutes ago, Subdeacon Joe said: You ain't had fun until you have to 3-Wire a M385 X 0.5 thread while the part is still in the lathe. Threaded length was only about 12mm. Used .018" wires and 40 inch calipers. Fun times. I know what that means, wonder who else does. Link to comment Share on other sites More sharing options...
Wallaby Jack, SASS #44062 Posted May 12, 2022 Share Posted May 12, 2022 1 hour ago, Kulshan 20262 said: No Wallaby, but you might be a seven sided cross-threaded nut. I knew I is "special" ... Link to comment Share on other sites More sharing options...
Wallaby Jack, SASS #44062 Posted May 12, 2022 Share Posted May 12, 2022 1 hour ago, John Kloehr said: ....... A Hot Wrench would make it quicker, but I can't find a recipe for the liquor. A Hot Wench, ....... now you're talking my langua ........ oh, you said wRrench ......... Link to comment Share on other sites More sharing options...
Sedalia Dave Posted May 13, 2022 Share Posted May 13, 2022 On 5/11/2022 at 7:24 PM, Crooked River Pete, SASS 43485 said: I know what that means, wonder who else does. Had to look that one up https://littlemachineshop.com/images/gallery/instructions/ThreeWireMethod.pdf Link to comment Share on other sites More sharing options...
Smuteye John SASS#24774 Posted May 13, 2022 Share Posted May 13, 2022 Used to be a business just off the interstate that was called Quality Nut and Screw. It got laughs from little boys for generations. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.