Warden Callaway Posted December 18, 2020 Share Posted December 18, 2020 The gun/pawn/and Stihl chainsaw shop in a small town in southern Missouri has had this pair of Old Army fixed sights stainless with conversion cylinders for too long. Sawmill Mary and I took a drive today and, long story short, came home with them. We got what looks to be Hogue checkered grips thrown in to top off the deal. I may be able to live with these Rugers. They have 3 screws (although on wrong side) and the action is somewhat familiar. Link to comment Share on other sites More sharing options...
Colorado Coffinmaker Posted December 18, 2020 Share Posted December 18, 2020 They also sport Conversion Cylinders. Gonna be fun with cartridges. Link to comment Share on other sites More sharing options...
Warden Callaway Posted December 18, 2020 Author Share Posted December 18, 2020 9 minutes ago, Colorado Coffinmaker said: They also sport Conversion Cylinders. Gonna be fun with cartridges. Yes, somewhere in the shuffle, the boxes and original percussion cylinders were lost. But they look unfired. They look high polished. Did they come in polished and not? Link to comment Share on other sites More sharing options...
J-BAR #18287 Posted December 18, 2020 Share Posted December 18, 2020 Welcome to the club. After fighting with '51s, '60s, '58s, etc. you are going to feel spoiled. Enjoy, my friend. Link to comment Share on other sites More sharing options...
Stump Water Posted December 18, 2020 Share Posted December 18, 2020 Well, they obviously weren't listed in the SASS classifieds. Helluva find. Link to comment Share on other sites More sharing options...
Randy Saint Eagle, SASS # 64903 Posted December 18, 2020 Share Posted December 18, 2020 Wish I had that kind of shop in my area! Randy Link to comment Share on other sites More sharing options...
Abilene Slim SASS 81783 Posted December 18, 2020 Share Posted December 18, 2020 Well done! Link to comment Share on other sites More sharing options...
Tex Jones, SASS 2263 Posted December 19, 2020 Share Posted December 19, 2020 Very nice. They remind me of the pistol Henry Darrow's character uses on High Chaparral. What caliber, Warden? Link to comment Share on other sites More sharing options...
Warden Callaway Posted December 19, 2020 Author Share Posted December 19, 2020 36 minutes ago, Randy Saint Eagle, SASS # 64903 said: Wish I had that kind of shop in my area! Randy You never know. On our way back from Black Gold a couple of years ago, we came through the middle of Tennessee. We deliberately drove the state highways when we could. Through one small town we spotted a small archery shop that said guns. Pulled in and they guy had many 8 long guns. But one was a pre-safty Marlin 1894 44 Magnum in safe queen condition. It had a new scope and rings. The price was half what you'd expect to pay. The story was, a divorced woman brought it in and put it on consignment. She set the price at what they paid for it new years back. I tried to get him to take the scope and rings off and lower the price but he wouldn't. I didn't need it but I couldn't see leaving it. Link to comment Share on other sites More sharing options...
Randy Saint Eagle, SASS # 64903 Posted December 19, 2020 Share Posted December 19, 2020 I guess there is always hope. Thanks Randy Link to comment Share on other sites More sharing options...
Yul Lose Posted December 19, 2020 Share Posted December 19, 2020 1 hour ago, Warden Callaway said: The gun/pawn/and Stihl chainsaw shop in a small town in southern Missouri has had this pair of Old Army fixed sights stainless with conversion cylinders for too long. Sawmill Mary and I took a drive today and, long story short, came home with them. We got what looks to be Hogue checkered grips thrown in to top off the deal. I may be able to live with these Rugers. They have 3 screws (although on wrong side) and the action is somewhat familiar. The addiction starts. Link to comment Share on other sites More sharing options...
Warden Callaway Posted December 19, 2020 Author Share Posted December 19, 2020 6 minutes ago, Yul Lose said: The addiction starts. I have 5 Pietta cap guns so I've been addicted for some time. Problem with these Rugers, I don't have holsters for the long barrels. And if I can snag percussion cylinders, I don't have molds to make BIG bails. Link to comment Share on other sites More sharing options...
H. K. Uriah, SASS #74619 Posted December 19, 2020 Share Posted December 19, 2020 I can't say for sure if they are, but I have always believed that the Ruger Old Army was essentially a "modernized" Remington '58, much like the Vaquero is a modernized SAA. [Any Ruger shooters, please correct my assertions if they are incorrect.] Anyway, while I recognize that it is a very well made gun, I am not personally interested in the Vaquero. However, I have always thought that the Old Army was one really cool looking pistol and would love to have one that's been cartridge converted. And wow, you found a matched pair of them. I am jealous. You've got a good find. Hooray for you. Link to comment Share on other sites More sharing options...
Warden Callaway Posted December 19, 2020 Author Share Posted December 19, 2020 The conversion cylinders are marked R&D on ratchet area and don't have they small rim view windows like the current models. Is it much of a problem just cutting in view ports? Link to comment Share on other sites More sharing options...
Yul Lose Posted December 19, 2020 Share Posted December 19, 2020 5 minutes ago, Warden Callaway said: The conversion cylinders are marked R&D on ratchet area and don't have they small rim view windows like the current models. Is it much of a problem just cutting in view ports? Adding the ports is not that big of a deal. I used a file on one set and a machinist friend of mine did another set. That being said sometimes if the shadows or sun is just right you still have to check the firing pins to see which one is not protruding. Link to comment Share on other sites More sharing options...
Warden Callaway Posted December 19, 2020 Author Share Posted December 19, 2020 Maybe a DIY video! I'll have to do it while Sawmill Mary's not watching. She was complaining to the gunshop guy today that every gun I buy ends up taken apart on the dinning table. Link to comment Share on other sites More sharing options...
Yul Lose Posted December 19, 2020 Share Posted December 19, 2020 54 minutes ago, H. K. Uriah, SASS #74619 said: I can't say for sure if they are, but I have always believed that the Ruger Old Army was essentially a "modernized" Remington '58, much like the Vaquero is a modernized SAA. [Any Ruger shooters, please correct my assertions if they are incorrect.] Anyway, while I recognize that it is a very well made gun, I am not personally interested in the Vaquero. However, I have always thought that the Old Army was one really cool looking pistol and would love to have one that's been cartridge converted. And wow, you found a matched pair of them. I am jealous. You've got a good find. Hooray for you. For me the ROA addiction is similar to my love of Pedersoli Lightning rifles and 16 gauge shotguns. My wife has told me that I’m a little different and I guess it shows with my affection for the not so main stream cowboy guns. Link to comment Share on other sites More sharing options...
irish ike, SASS #43615 Posted December 19, 2020 Share Posted December 19, 2020 I don't have the ports. I just look to see which firing pin isn't sticking up. Would it be rude to ask what you paid? I have the exact same thing sort of, Blued and short barrels, R&D, and action job. I might sell them. Link to comment Share on other sites More sharing options...
Warden Callaway Posted December 19, 2020 Author Share Posted December 19, 2020 8 hours ago, irish ike, SASS #43615 said: Would it be rude to ask what you paid? I Well, I'll just say with something that's not been made in any big quantities or for some 30 years, you pay based on how badly you want it and how motivated the seller is. One sale probably ain't enough to make a market analyst. The curve is too flat. I've spotted this pair nearly two years ago in this shop and looked at them. And expected them to be gone the next time we came back. I guess the area doesn't have many Cowboy or black powder shooters as they were still there. Not having original cylinders, box and papers kind of knocks them off the collector's list. Even though they look unfired. The shop is like all others, getting picked over by people buying black rifles and Tupperware pistols. They are not putting money into big, clunky, slow loading shiny guns when they can buy something that is tacticool. Link to comment Share on other sites More sharing options...
Texas Joker Posted December 19, 2020 Share Posted December 19, 2020 Can't wait to see those in the spring! That is a great find Warden. Old armies like that need a couple US cavalry holsters. Thems officers guns Link to comment Share on other sites More sharing options...
J-BAR #18287 Posted December 19, 2020 Share Posted December 19, 2020 Classic Ballistix can send you BP cylinders for your ROAs. Yes, the price is breathtaking. Yes, the guns are worth it. Sell the conversion cylinders since you already have .45 Colt cartridge guns. http://www.classicballistx.com/our_cylinder.html Link to comment Share on other sites More sharing options...
irish ike, SASS #43615 Posted December 19, 2020 Share Posted December 19, 2020 Wow, the cylinder price is what you could get an ROA for back 10 years ago! Yikes. Link to comment Share on other sites More sharing options...
Yul Lose Posted December 19, 2020 Share Posted December 19, 2020 37 minutes ago, irish ike, SASS #43615 said: Wow, the cylinder price is what you could get an ROA for back 10 years ago! Yikes. Capt. Baylor wrote an article in the October 2020 Chronicle about C&B cylinders from Ran Can for around $185.00 per cylinder. A pard of mine just got two of them and they are very well made, fluted too. Link to comment Share on other sites More sharing options...
Crooked River Pete, SASS 43485 Posted December 19, 2020 Share Posted December 19, 2020 I'd check with Ruger, they might have some still in stock. Link to comment Share on other sites More sharing options...
Dirty Dan Dawkins Posted December 21, 2020 Share Posted December 21, 2020 On 12/18/2020 at 7:42 PM, Warden Callaway said: You never know. On our way back from Black Gold a couple of years ago, we came through the middle of Tennessee. We deliberately drove the state highways when we could. Through one small town we spotted a small archery shop that said guns. Pulled in and they guy had many 8 long guns. But one was a pre-safty Marlin 1894 44 Magnum in safe queen condition. It had a new scope and rings. The price was half what you'd expect to pay. The story was, a divorced woman brought it in and put it on consignment. She set the price at what they paid for it new years back. I tried to get him to take the scope and rings off and lower the price but he wouldn't. I didn't need it but I couldn't see leaving it. I bought a nearly new 44-40 Cowboy 24” with action job for $500 under similar circumstances Link to comment Share on other sites More sharing options...
Warden Callaway Posted December 21, 2020 Author Share Posted December 21, 2020 On 12/18/2020 at 7:24 PM, H. K. Uriah, SASS #74619 said: I can't say for sure if they are, but I have always believed that the Ruger Old Army was essentially a "modernized" Remington '58, I'd say more like a Spiller and Burr. The three screw action and the base pin / loading lever design. About 9 minutes into this video Mike takes the gun apart and shows the difference in design. Did the Old Army stainless come in dull and bright polished finish? These are polished remarkably well. The best finished Rugers I've seen. I had a pair of stainless Vaqueros that looked like they were finished by the sheltered workshop. Link to comment Share on other sites More sharing options...
J-BAR #18287 Posted December 21, 2020 Share Posted December 21, 2020 2 hours ago, Warden Callaway said: Did the Old Army stainless come in dull and bright polished finish? I have a pair of 7 1/2” bright stainless ROAs that are factory originals and remarkably accurate, poi is poa for both, without any tweaking. Link to comment Share on other sites More sharing options...
bgavin Posted December 21, 2020 Share Posted December 21, 2020 On 12/18/2020 at 4:42 PM, Warden Callaway said: ... we came through the middle of Tennessee. ...But one was a pre-safty Marlin 1894 44 Magnum in safe queen condition. The story was, a divorced woman brought it in and put it on consignment. This is "antique" shopping for cowboys. Kudos on the exceptional find. If one of those in 44 mag fell off the truck in front of my house.. I'd sure keep it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.