Michael Cieslak Posted October 9, 2019 Share Posted October 9, 2019 I just acquired a 1982 (JM) Marlin 1894C in nearly mint condition. I’d like to get it slicked up for Cowboy matches. I’d appreciate any suggestion as to whom I should employ to do the work. Thanks much and Happy Trails. Link to comment Share on other sites More sharing options...
Shooting Bull Posted October 9, 2019 Share Posted October 9, 2019 Slick McClade does slick work. It's right there in his name. Slick Magic Guns Link to comment Share on other sites More sharing options...
Roscoe Regulator Posted October 9, 2019 Share Posted October 9, 2019 32 minutes ago, Shooting Bull said: Slick McClade does slick work. It's right there in his name. Slick Magic Guns I didn't find any info there about working on rifles. Link to comment Share on other sites More sharing options...
Shooting Bull Posted October 9, 2019 Share Posted October 9, 2019 I think you might have to call or email him to discuss work you want done. He does awesome work. Link to comment Share on other sites More sharing options...
Krazy Kajun Posted October 9, 2019 Share Posted October 9, 2019 I think Widder is still doing work. Kajun Link to comment Share on other sites More sharing options...
Bad Bascomb, SASS # 47,494 Posted October 9, 2019 Share Posted October 9, 2019 In the absence (much lamented) of Widder's commercial magic, Cowboy Carty is highly recommended. Might be a bit of a wait..... I found, once getting used to the routine of disassembly, they are easy to work on. There are online hints and guidance by Widder and some others, who I forget by now, which I found to be tremendously helpful. Marauder has info on his info pages. Smooth everything which rubs, and go slowly. I refine mine every time I tear down for cleaning, and polish any scuffs. Over the years, it has become glass-smooth. Long Hunter and Slick Magic are good parts sources. Get the Ranger Point extractor--- saves a bit of time tuning/refining the stock unit. Good Luck. You have a great piece to work with. BB Link to comment Share on other sites More sharing options...
Anvil Al #59168 Posted October 9, 2019 Share Posted October 9, 2019 Wife shoots one that Slick did and it's pretty sweet. Not sure he is still doing rifles for the public anymore. But you can call him to see. Have felt some that Boomstick of Boomstick Arms has done and they felt pretty good also. But have heard some pretty great things about those Cowboy Carty rifles. Never got my hands on one yet. Would sure like to. Link to comment Share on other sites More sharing options...
Cypress Sam, SASS #10915 Posted October 9, 2019 Share Posted October 9, 2019 Go to: https://marauder.homestead.com/files/TUNING_M_1894.htm Good info on tuning Marlins Link to comment Share on other sites More sharing options...
Warden Callaway Posted October 9, 2019 Share Posted October 9, 2019 30 minutes ago, Cypress Sam, SASS #10915 said: Go to: https://marauder.homestead.com/files/TUNING_M_1894.htm Good info on tuning Marlins It's the 90/10 rule. If you can take a Marlin 1894 apart and get it back together, you can make a lot of improving installing reduced power springs and following the instructions on the Marauder post above. Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted October 9, 2019 Share Posted October 9, 2019 I would first see how it runs with your SASS loads. Wolff Gunsprings has a lighter hammer spring that goes a long way to 'slickn' the action. I would also see how it feels after run'n about 500 rnds of SASS ammo through it. The only thing I would do now, is to get one of Slick's SS mag followers to replace that POS factory plastic one. Make sure ALL the screws are 'tite'. OLG Link to comment Share on other sites More sharing options...
Duffield, SASS #23454 Posted October 10, 2019 Share Posted October 10, 2019 Long Hunter sells spring kits, one piece firing pins and lever wraps. They can also do the work if you are not in to doing it yourself. Duffield Link to comment Share on other sites More sharing options...
Bad Bascomb, SASS # 47,494 Posted October 10, 2019 Share Posted October 10, 2019 Cypress Sam nailed the good source for DIY info. Thanks for supporting my failing memory..... Link to comment Share on other sites More sharing options...
TUCO SASS #46748 Posted October 10, 2019 Share Posted October 10, 2019 Cowboy Carty hands down the best. My son J.B. Kidd has 2 done, and I have one done by him. Link to comment Share on other sites More sharing options...
Marshal Chance Morgun Posted October 10, 2019 Share Posted October 10, 2019 4 hours ago, TUCO SASS #46748 said: Cowboy Carty hands down the best. My son J.B. Kidd has 2 done, and I have one done by him. I've heard ( second hand ) that Carty may not be doing Marlins since he has started working on 73's. Best thing to do would be contact him https://www.facebook.com/Western-Gun-Works-1678033062499004/ Link to comment Share on other sites More sharing options...
Lawman Mays Posted October 10, 2019 Share Posted October 10, 2019 Billy the Avenger has a video out there which shows how to slick up a Marlin 94cb. Marauder has one but I haven't seen his. This is how I did mine. Watched the video and followed the instructions. Basically, you buy a lighter spring kit from one of the many SASS vendors out there. Then, switch out the lever plunger spring, the hammer spring, change the firing pin to a one piece firing pin. Remove the plastic follower and replace with a metal one. After the gun is apart, sand down all moving parts as shown on the video with # 6 sandpaper, lightly oil and then put back together. Then, work the action back and forth and fire the gun a lot. Then your all set. Link to comment Share on other sites More sharing options...
Warden Callaway Posted October 10, 2019 Share Posted October 10, 2019 22 minutes ago, Lawman Mays said: Then, switch out the lever plunger spring, While you have the magazine tube opened up, polish the port hole, clean and polish inside of tube, apply wax, trim magazine spring to no more than 3" longer than the tube. On the 1894c you can probably go as short as 2". I made this tube mod to my Marlin 1894c. Link to comment Share on other sites More sharing options...
Lawman Mays Posted October 10, 2019 Share Posted October 10, 2019 3 hours ago, Warden Callaway said: trim magazine spring to no more than 3" longer than the tube. On the 1894c you can probably go as short as 2" Yes, I forgot to mention this. If you don't trim that spring, it will be difficult to push in the 9th and 10th rounds through the loading gate. Link to comment Share on other sites More sharing options...
Blue Eyed Drifter Posted October 15, 2019 Share Posted October 15, 2019 On 10/10/2019 at 11:21 AM, Lawman Mays said: Billy the Avenger has a video out there which shows how to slick up a Marlin 94cb. Marauder has one but I haven't seen his. This is how I did mine. Watched the video and followed the instructions. Basically, you buy a lighter spring kit from one of the many SASS vendors out there. Then, switch out the lever plunger spring, the hammer spring, change the firing pin to a one piece firing pin. Remove the plastic follower and replace with a metal one. After the gun is apart, sand down all moving parts as shown on the video with # 6 sandpaper, lightly oil and then put back together. Then, work the action back and forth and fire the gun a lot. Then your all set. Billy did wife's and it is as smooth/ maybe smoother than the one widder did for me. Link to comment Share on other sites More sharing options...
Blue Eyed Drifter Posted October 15, 2019 Share Posted October 15, 2019 On 10/10/2019 at 2:53 PM, Lawman Mays said: Yes, I forgot to mention this. If you don't trim that spring, it will be difficult to push in the 9th and 10th rounds through the loading gate. Be careful with this after a few months of shooting the spring will compress. Link to comment Share on other sites More sharing options...
Widder, SASS #59054 Posted October 15, 2019 Share Posted October 15, 2019 11 hours ago, Blue Eyed Drifter said: Be careful with this after a few months of shooting the spring will compress. Yes. A NEW spring can normally be trimmed to about 3-4 cartridge lengths longer than the magtube. After that new spring has had time to 'set' (probably around 6 months), the overall length can be 2 cartridge lengths longer than the mag tube. If you keep your mag tube clean, minimal magtube spring length will be sufficient. Remember..... you only need enough spring force to push ONE round onto the carrier..... which is the last round. I'm not actively working on Marlin att, mainly because I stay fairly busy with Henry .22 work. Basic Marlin work to help smooth up the action can be found on Marauder's website with various Marlin smiths sharing good info. Good luck. And if ya got any questions, feel free to pick up the phone and give me a shout: 865 / 696-1996 in Tennessee. ..........Widder Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.