JD Trampas, SASS # 55781 Posted September 17, 2011 Share Posted September 17, 2011 Been thinking on getting a 22 revolver with the extra 22 mag cylinder, here are the choices:: Taylors Stallion, standard grip, $469.00, the Cimarron Plinkerton $231.00, this is just 22LR, so no mag cylinder, they do have some model P's in the configuration I want, around the $460 mark, then you have the Ruger Single six convertaible with both cylinders for $538 Which would you get and why??? All for now JD Trampas Link to comment Share on other sites More sharing options...
john fox Posted September 17, 2011 Share Posted September 17, 2011 Been thinking on getting a 22 revolver with the extra 22 mag cylinder, here are the choices:: Taylors Stallion, standard grip, $469.00, the Cimarron Plinkerton $231.00, this is just 22LR, so no mag cylinder, they do have some model P's in the configuration I want, around the $460 mark, then you have the Ruger Single six convertaible with both cylinders for $538 Which would you get and why??? All for now JD Trampas I have the Ruger and think it is the best! Link to comment Share on other sites More sharing options...
Marshal Dan Troop 70448 Posted September 17, 2011 Share Posted September 17, 2011 I bought a Ruger, cost 385.00, sold the .22 Magnum cylinder on Gunbrokers for 75.00. MT If you go Ruger, check out different prices, very few dealers I know, sell at suggested retail. Most I have seen have sold between 375, and 475.00. Link to comment Share on other sites More sharing options...
Oddnews SASS# 24779 Posted September 17, 2011 Share Posted September 17, 2011 I'd think the clear choice would be the between the Plinkerton and the Ruger. My own choice would be the Ruger, which will still be shooting when a gun with a more traditional action has been to the shop three times. And I freely admit this doesn't reflect my competition choices -- I shoot a USFA and a Colt in CAS, but the Ruger is an improvement on the original design. Link to comment Share on other sites More sharing options...
Chili Ron Posted September 17, 2011 Share Posted September 17, 2011 Howdy, I bought a stainless 22 conv ruger some years back. After a little while I just quit using the more expensive mag ammo. If I shoot 22 mag at all, I shoot it in a rifle. If you check around you will see that magnum ammo really doesnt have real hitting power without a longer barrel. I find stainless easy to clean and I can keep it in a holster. Ruger just brought out a ten shooter, how would that be? Best CR Link to comment Share on other sites More sharing options...
H. K. Uriah, SASS #74619 Posted September 17, 2011 Share Posted September 17, 2011 Been thinking on getting a 22 revolver with the extra 22 mag cylinder, here are the choices:: Taylors Stallion, standard grip, $469.00, the Cimarron Plinkerton $231.00, this is just 22LR, so no mag cylinder, they do have some model P's in the configuration I want, around the $460 mark, then you have the Ruger Single six convertaible with both cylinders for $538 Which would you get and why??? All for now JD Trampas Based on the prices seen in your post, I'll assume you have an upper limit of $550.00. If you look long and hard enough, you can get a Colt for less than that. I've got three of them... Link to comment Share on other sites More sharing options...
Jacknife Posted September 17, 2011 Share Posted September 17, 2011 Didn't know Ruger made a SAA, but I would get one of their 22's over the others you mentioned. Link to comment Share on other sites More sharing options...
JD Trampas, SASS # 55781 Posted September 17, 2011 Author Share Posted September 17, 2011 HK Uriah, no upper limit here, was just wondering about these is all, I for one have loved Ruger products from day one, just wondering about the others if any had any comments is all. I know about Colt having SAA in 22, they are pricey around this area and one other thing, you don't see very many at all, even at gun shows, when a person has a Colt SAA in 22, they keep it, they don't sell it. I was just thinking about a SAA in 22 is all for some plinking, we do have some cowboy 22 shoots around here is why I was inquiring. By the posts so far, everyone says to go with ruger, most likely if I get any, it will be ruger unless I can find some colts that I don't have to take out a bank loan on. All for now JD Trampas Link to comment Share on other sites More sharing options...
Uno Mas SASS #80082 Posted September 17, 2011 Share Posted September 17, 2011 Roooooooger! Very pleased with my Single Six Convertible. Can't wait till they bring out the Single Ten in a Convertible 6.5"! I've seen other SA 22LRs fail over the years. The Ruger just keeps on clicking. In addition, their Customer Service is superb. Link to comment Share on other sites More sharing options...
Texas Jim Henry, SASS #20616 Posted September 17, 2011 Share Posted September 17, 2011 Howdy, JD - If you want a truly beautiful replica of the Colt SAA in .22LR and .22 Mag, see if you can find the Plinker model from USFA. If you have to order one from USFA, be prepared for a lengthy wait. And they are not cheap. As mentioned in previous posts, you can shop Gunbroker.com for a Colt Peacemaker or Scout, and usually find a decent shooter for a decent price. I got a nice Peacemaker that way (came with both cylinders) for less than $500. Just need to figure out what floats your boat. Regards, TJH Link to comment Share on other sites More sharing options...
Scratch McCoy Posted September 17, 2011 Share Posted September 17, 2011 I have a Ruger Single Six with a Birdshead grip that I just love. Considered trying to find a Colt Peacemaker but am very happy with the Ruger. Link to comment Share on other sites More sharing options...
Marshall John Joseph Posted September 17, 2011 Share Posted September 17, 2011 Know where you can get a couple of new Ruger Single Six Convertibles for $399 each - brand new. PM me if interested. MJJ Link to comment Share on other sites More sharing options...
Marshal TKD, Sass # 36984L Posted September 18, 2011 Share Posted September 18, 2011 I have a Ruger Single Six made in 1957. I still shoot it. It still shoots great. To me the Ruger has a proven track record. Link to comment Share on other sites More sharing options...
ChuteTheMall Posted September 18, 2011 Share Posted September 18, 2011 I bought a brand new Ruger New Model Super Single Six with 6 1/2" barrel and both cylinders for about $75 NIB back in 1973, and it's still one of my favorite guns. I think the price has gone up some since then. Link to comment Share on other sites More sharing options...
Cypress Sam, SASS #10915 Posted September 18, 2011 Share Posted September 18, 2011 If you look hard in the gunshows you should be able to find old Ruger three screw models for between 3 and 4 hundred bucks. In my opinion these are the cream of the single action 22 guns. Some of the later models of these came with conversion cylinders to 22 Mag. There are a couple of different grip frames for these guns but most of them have grips that are interchangeable with old model Vaqueros. The ten shot model from USFA would be interesting but I've never actually seen one. Full size single actions in 22 are pretty heavy. Link to comment Share on other sites More sharing options...
Lone Dog, SASS #20401 Posted September 18, 2011 Share Posted September 18, 2011 Sam, the USFA actually has 12 charge holes, not 10!! The new Single Six is a 10 shooter, I think but I think it has those abominable fiber optic sights. Oh how I hate those things. Uberti now has 10 shot Stallions in fixed and adj sight versions. The Plinkerton is the worst piece of pot metal junk to ever wear the Cimarron name. Cimarron's guns are usually of the highest quality but not this one. Link to comment Share on other sites More sharing options...
Rev Willy Dunkum, SASS # 61027 Posted September 18, 2011 Share Posted September 18, 2011 Whatever you do, if you see an RG model single action 22 LR, run don't walk away from it. These were German made pieces of junk that were dangerous right out of the box. That was my very first gun purchase ever. My choice would be for a couple of Colt 22's as well or Ruger. I have two Colt 22 New Frontiers but would not hesitate to pick up a Ruger. Link to comment Share on other sites More sharing options...
Granny Annie SASS #37063 Posted September 19, 2011 Share Posted September 19, 2011 I absolutely love my Ruger Single Six's. I shoot them every day when we are in Arizona and they have never caused a problem. Probably the best money I have ever spent on guns! Also, Baaaaaaad Phil got a nice new .22 SA that he is happy with and it was a lot less $$. Take a look at his next time you're here. Link to comment Share on other sites More sharing options...
Three Foot Johnson Posted September 19, 2011 Share Posted September 19, 2011 The Plinkerton is a piece of crap - even a Heritage Rough Rider would be a better choice. The Stallion is a good platform, but the Ruger is even better. Link to comment Share on other sites More sharing options...
Guest Winchester Jack, SASS #70195 Posted September 19, 2011 Share Posted September 19, 2011 I have a Ruger single six with the extra cylinder. It works great, recently I picked up a Heritage 22 with a birdheads grip and an extra magnum cylinder for $200. Its not a Ruger but my grandson likes it because it fits his hand better than the Ruger does. Link to comment Share on other sites More sharing options...
J-BAR #18287 Posted September 20, 2011 Share Posted September 20, 2011 I cannot think of one time in my life where "you get what you pay for" did not hold true. I use a 4.5 inch Ruger SS Single Six .22 for practice. It was not the cheapest available. But I have no complaints. If I want to use the .22 Magnum cartridge, I can. Sometimes I do, in the woods. Life is short. Buy quality stuff. Link to comment Share on other sites More sharing options...
Six-Shot Posted September 20, 2011 Share Posted September 20, 2011 I have a pair of .22LR Ruger stainless Single Six's that I practice in my basement with that are identical to my pair of "main match" .357/.38 spl stainless New Model Blackhawk's. Do you think if I used my Single Six's in a "main match" the spotters would notice? Link to comment Share on other sites More sharing options...
Church Key, SASS # 33713 Posted September 20, 2011 Share Posted September 20, 2011 I have a pair of .22LR Ruger stainless Single Six's that I practice in my basement with that are identical to my pair of .357/.38 spl stainless New Model Blackhawk's. Do you think if I used my Single Six's in a "main match" the spotters would notice? Probably not; but the loading table officer would have a fine time with you. Link to comment Share on other sites More sharing options...
Six-Shot Posted September 20, 2011 Share Posted September 20, 2011 Probably not; but the loading table officer would have a fine time with you. Good point! LOL!!!! Link to comment Share on other sites More sharing options...
Jacknife Posted September 20, 2011 Share Posted September 20, 2011 I have a pair of .22LR Ruger stainless Single Six's that I practice in my basement with that are identical to my pair of "main match" .357/.38 spl stainless New Model Blackhawk's. Do you think if I used my Single Six's in a "main match" the spotters would notice? What do ya mean by "identical"? My 38's are larger frame than my 22's. Link to comment Share on other sites More sharing options...
Six-Shot Posted September 20, 2011 Share Posted September 20, 2011 What do ya mean by "identical"? My 38's are larger frame than my 22's. Shhhhhhhhhhhhh . . . the only way you can tell is if you hold 'em side-by-side. Link to comment Share on other sites More sharing options...
Henry Heck Posted September 20, 2011 Share Posted September 20, 2011 What do ya mean by "identical"? My 38's are larger frame than my 22's. Not sure about the other fellow, but my (OM) Single Sixes, (NM) Blackhawks, and (OM) Vaqueros all swap grips. They share grip frames, all using the XR3-RED if I remember right. Aside from obvious weight differences, the grips all feel the same. As far as a 22 pistol, I swear by the Single Six with Colt's Frontier Scout running second. Granted, the Scout is more "cowboy". All the cowboy in the world doesn't change the fact that my Single Sixes are used as squirrel guns and the Scout is a soda can plinker. YMMV of course Link to comment Share on other sites More sharing options...
Six-Shot Posted September 20, 2011 Share Posted September 20, 2011 Not sure about the other fellow, but my (OM) Single Sixes, (NM) Blackhawks, and (OM) Vaqueros all swap grips. They share grip frames, all using the XR3-RED if I remember right. Aside from obvious weight differences, the grips all feel the same. As far as a 22 pistol, I swear by the Single Six with Colt's Frontier Scout running second. Granted, the Scout is more "cowboy". All the cowboy in the world doesn't change the fact that my Single Sixes are used as squirrel guns and the Scout is a soda can plinker. YMMV of course Mine do too. Link to comment Share on other sites More sharing options...
Oklahomabound Posted September 20, 2011 Share Posted September 20, 2011 We have the Ruger Single Six in .22 convertible - nice shooting revolver. Also have the Heritage Single Action in .22 convertible - have been pleasantly surprised with this revolver. I find that I can aim it easier and it is on target faster than our Ruger. Link to comment Share on other sites More sharing options...
M. C. Ryder, SASS #16346 Posted September 20, 2011 Share Posted September 20, 2011 I have 3 Ruger Single Sixes, one is a Bisley that I got saw used at a fantastically low price. I have put literally thousands of rounds through them with no malfunctions or breakages. I think they are one of the finest firearms ever made. I'm a cheapskate, but this is one instance where I think the extra money is definitely worth it. The only "problem" I have had with them is that since they are sized for adults, young kids can't use them easily. Link to comment Share on other sites More sharing options...
Holden A. Grudge Posted September 20, 2011 Share Posted September 20, 2011 I have two of the Heritage .22 with the LR and Mag cylinders. They are plinkers and what I use to get the kids started in CAS. The frame size on the single six is bigger and harder for the younger kids. By the time they can handle the single six they can handle a .38 So far these have held up pretty well considering the price. Link to comment Share on other sites More sharing options...
Done Gone, SASS #49052 Posted September 21, 2011 Share Posted September 21, 2011 I'm with Holden. I have two of the Heritage Rough Rider with the convertible cylinders. The young'un (Little Maverick) has been shooting them for less then a year and they're holding up great. For the cost, you could buy them twice (maybe three times) for the cost of the Roogers and Colts. Well worth what I paid for them. Link to comment Share on other sites More sharing options...
Adirondack Jack, SASS #53440 Posted September 21, 2011 Share Posted September 21, 2011 I'd get a Ruger, forget about the extra cylinder, and if I wanted a bit more thump, use CCI Velocitors in it. As above, the extra bark of the mag doesn't make that much difference, and is sure pricey to shoot. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.