Wallaby Jack, SASS #44062 Posted November 12, 2021 Share Posted November 12, 2021 ....... spanners ..... Link to comment Share on other sites More sharing options...
Wallaby Jack, SASS #44062 Posted November 12, 2021 Author Share Posted November 12, 2021 and then there's ... Link to comment Share on other sites More sharing options...
Wallaby Jack, SASS #44062 Posted November 12, 2021 Author Share Posted November 12, 2021 but if you only want it finger tight ... Link to comment Share on other sites More sharing options...
Alpo Posted November 12, 2021 Share Posted November 12, 2021 1 hour ago, Wallaby Jack, SASS #44062 said: and then there's ... An adjustable Crowfoot. Not a bad idea. Link to comment Share on other sites More sharing options...
Alpo Posted November 12, 2021 Share Posted November 12, 2021 1 hour ago, Wallaby Jack, SASS #44062 said: ....... spanners ..... This is a bad photograph. If it was taken face on, so you could see how each wrench was adjusted, and see that the wrench over 11/16 was opened wider then the one over 3/16, this would be a funnier picture. One assumes that the wrenches are adjusted to the correct size, but you can't tell because of the angle that the picture was taken at, and the fact that the smaller sizes are further away from the camera. Link to comment Share on other sites More sharing options...
Cold Lake Kid, SASS # 51474 Posted November 12, 2021 Share Posted November 12, 2021 9 minutes ago, Alpo said: An adjustable Crowfoot. Not a bad idea. Would that the ever elusive 10mm socket? Link to comment Share on other sites More sharing options...
Smuteye John SASS#24774 Posted November 12, 2021 Share Posted November 12, 2021 They left out the combo wrenches. Link to comment Share on other sites More sharing options...
Rye Miles #13621 Posted November 12, 2021 Share Posted November 12, 2021 2 hours ago, Wallaby Jack, SASS #44062 said: ....... spanners ..... Wow, I'm missing quite a few! Link to comment Share on other sites More sharing options...
Injun Ryder, SASS #36201L Posted November 12, 2021 Share Posted November 12, 2021 Wow! That's quite a collection of nut/bolt rounders! Link to comment Share on other sites More sharing options...
Smuteye John SASS#24774 Posted November 12, 2021 Share Posted November 12, 2021 But does the collection include any left handed ones? Link to comment Share on other sites More sharing options...
Forty Rod SASS 3935 Posted November 12, 2021 Share Posted November 12, 2021 I have three crescent wrenches: one small, one medium, and one large. Link to comment Share on other sites More sharing options...
Singin' Sue 71615 Posted November 12, 2021 Share Posted November 12, 2021 3 hours ago, Alpo said: This is a bad photograph. If it was taken face on, so you could see how each wrench was adjusted, and see that the wrench over 11/16 was opened wider then the one over 3/16, this would be a funnier picture. One assumes that the wrenches are adjusted to the correct size, but you can't tell because of the angle that the picture was taken at, and the fact that the smaller sizes are further away from the camera. Snicker time!!! Link to comment Share on other sites More sharing options...
Wallaby Jack, SASS #44062 Posted November 12, 2021 Author Share Posted November 12, 2021 8 hours ago, Wallaby Jack, SASS #44062 said: and then there's ... 6 hours ago, Cold Lake Kid, SASS # 51474 said: Would that the ever elusive 10mm socket? .....seems to set at about 10mm .... so I'll stick my neck out and say "yes" ..... Link to comment Share on other sites More sharing options...
Pat Riot Posted November 12, 2021 Share Posted November 12, 2021 You can always find the 10mm sockets right next to the 1/2” sockets….that are also missing… Link to comment Share on other sites More sharing options...
Sixgun Sheridan Posted November 12, 2021 Share Posted November 12, 2021 7 hours ago, Alpo said: This is a bad photograph. If it was taken face on, so you could see how each wrench was adjusted, and see that the wrench over 11/16 was opened wider then the one over 3/16, this would be a funnier picture. One assumes that the wrenches are adjusted to the correct size, but you can't tell because of the angle that the picture was taken at, and the fact that the smaller sizes are further away from the camera. Okay, that does it Alpo. I'm not inviting you to any parties! Link to comment Share on other sites More sharing options...
Pat Riot Posted November 12, 2021 Share Posted November 12, 2021 No one ever talks about the 3” 3/8” drive extensions that also become completely transparent when needed. Link to comment Share on other sites More sharing options...
Wallaby Jack, SASS #44062 Posted November 12, 2021 Author Share Posted November 12, 2021 29 minutes ago, Pat Riot, SASS #13748 said: No one ever talks about the 3” 3/8” drive extensions that also become completely transparent when needed. ............... useful as drifts to knock 1/2" bolts out of their holes ..... Link to comment Share on other sites More sharing options...
Sixgun Sheridan Posted November 12, 2021 Share Posted November 12, 2021 Link to comment Share on other sites More sharing options...
Alpo Posted November 12, 2021 Share Posted November 12, 2021 Several years back I was reading - probably in Hot Rod - an article about a mechanic on a professional stock car team. He said that he could temporarily fix anything with orange sunshine, silver magic, and a blue tipped wrench. And they went on to explain that orange sunshine with some heavy-duty industrial adhesive, silver magic was duct tape, and a blue-tipped wrench was an acetylene cutting torch. Link to comment Share on other sites More sharing options...
Cold Lake Kid, SASS # 51474 Posted November 13, 2021 Share Posted November 13, 2021 3 hours ago, Sixgun Sheridan said: Whenever I had to rebuild/replace/repair anything on my Ski-Doo trailer, I always used the largest, longest bar I had with a socket of the right size and just turned until I snapped the calcium/road salt rusted bolt right off. Then installed a new bolt. Link to comment Share on other sites More sharing options...
DeaconKC Posted November 13, 2021 Share Posted November 13, 2021 5 hours ago, Pat Riot, SASS #13748 said: You can always find the 10mm sockets right next to the 1/2” sockets….that are also missing… 1/2" sockets? I must have yours, I'm buried in them, now 7/16"? Gimme those back! Link to comment Share on other sites More sharing options...
Tom Bullweed Posted November 13, 2021 Share Posted November 13, 2021 12 hours ago, Smuteye John SASS#24774 said: They left out the combo wrenches. I got one of these. I call it my S.L.A.P. wrench, a Solution Looking for A Problem. Link to comment Share on other sites More sharing options...
Smuteye John SASS#24774 Posted November 13, 2021 Share Posted November 13, 2021 Link to comment Share on other sites More sharing options...
Smuteye John SASS#24774 Posted November 13, 2021 Share Posted November 13, 2021 54 minutes ago, Tom Bullweed said: I got one of these. I call it my S.L.A.P. wrench, a Solution Looking for A Problem. It is kind of a PT Barnum Special, ain't it? Link to comment Share on other sites More sharing options...
Alpo Posted November 13, 2021 Share Posted November 13, 2021 7 minutes ago, Smuteye John SASS#24774 said: Did you notice that while one is marked right handed and the other is marked left handed, in the fine print on both of them it says CAUTION THIS TOOL ONLY WORKS ANTI-CLOCKWISE? Link to comment Share on other sites More sharing options...
Dustin Checotah Posted November 13, 2021 Share Posted November 13, 2021 7 hours ago, Sixgun Sheridan said: I worked as maintenance for a steel fabrication company. I was doing some major repair work on our sand blast system. I had a new guy working for me and when I couldn't move a bolt and nut from deep within the gritty mess below the machine I sent him up to the maintenance cage to get some tools one of the things I told him was to get the thermal adjustment tool. He came back with everything but the cutting torch. He asked me what it was and I told him. Now he knows. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.