Shooting Bull Posted March 18, 2021 Posted March 18, 2021 I REALLY hesitate to do this but, are there any good instructions out there for disassembly and more important REassembly of SKBs?
Pit Bull Tex Posted March 18, 2021 Posted March 18, 2021 Send it to Johnny Meadows.That way you don't have to read.
TN Mongo, SASS #61450 Posted March 18, 2021 Posted March 18, 2021 SKB has a nice exploded diagram; if this helps. Click on the link below. Parts Breakdowns | SKB Shotguns I hope this helps.
Badlands Bob #61228 Posted March 18, 2021 Posted March 18, 2021 Fast Eddie does all the assembly and disassembly on my SKBs. I am not allowed near them with a screwdriver.
July Smith Posted March 18, 2021 Posted March 18, 2021 2 hours ago, Pit Bull Tex said: Send it to Johnny Meadows.That way you don't have to read. Is Johnny taking work again? Last time I talked to him he had moved and did not have an FFL to receive shipments.
J-BAR #18287 Posted March 18, 2021 Posted March 18, 2021 Occasional malfunction and lack of funds forced me to screw up my courage and take my SKB 100 apart. I am not a gunsmith. I took my time and got it done. I had trouble re-assembling the inertial connector; tiny washers/spacers and spring in there did not cooperate. Dirt Merchant was kind enough to spend a few minutes on the phone and provide guidance. I am not saying he is still available for consultation. Just describing my experience. But if you have good screwdrivers and a place to work where springs and teensy parts can’t escape, I’m betting you can do it. And I’m glad I don’t have to feed myself and my wife doing it every day! Good luck.
TN Mongo, SASS #61450 Posted March 18, 2021 Posted March 18, 2021 I found this reprint of an 1974 Ithaca manual that includes SKB doubles for a little under $18. Click on the link below: Cornell Publications -Ithaca 1974 Gun Company Parts and Service Catalog (cornellpubs.com)
Barkeep Casey Posted March 18, 2021 Posted March 18, 2021 3 hours ago, Badlands Bob #61228 said: Fast Eddie does all the assembly and disassembly on my SKBs. I am not allowed near them with a screwdriver. Or Peanut Butter....
John Barleycorn, SASS #76982 Posted March 18, 2021 Posted March 18, 2021 2 hours ago, July Smith said: Is Johnny taking work again? Last time I talked to him he had moved and did not have an FFL to receive shipments. Yes, Johnny’s new FFL has gone through
Beartrap SASS#57175 Posted March 18, 2021 Posted March 18, 2021 Mongo no have sawsall, hammer and chisel?
Shooting Bull Posted March 18, 2021 Author Posted March 18, 2021 4 hours ago, Beartrap SASS#57175 said: Mongo no have sawsall, hammer and chisel? Oh I've got all those. But they make that REassembly part a bit tricky.
Beartrap SASS#57175 Posted March 18, 2021 Posted March 18, 2021 6 minutes ago, Shooting Bull said: Oh I've got all those. But they make that REassembly part a bit tricky. What, Mongo no have JB Weld?
Krazy Kajun Posted March 19, 2021 Posted March 19, 2021 Does Mongo need Fast Eddie's phone number? Kajun
Shooting Bull Posted March 20, 2021 Author Posted March 20, 2021 On 3/18/2021 at 4:27 PM, Beartrap SASS#57175 said: What, Mongo no have JB Weld? Flat ran out putting my rifle back together.
Shooting Bull Posted March 20, 2021 Author Posted March 20, 2021 23 hours ago, Krazy Kajun said: Does Mongo need Fast Eddie's phone number? Kajun I need instructions..............in crayon.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.