Prairie Dawg, SASS #50329 Posted October 29, 2018 Posted October 29, 2018 Good Evening Folks: Major safe cleaning A Pair of 7.5” Ruger Old Army Revolvers Serial #148-06355 & #148-11268 These guns were purchased from Boomstick Jay. Finish -- Stainless Steel 5 Treso nipples and 1 Ruger nipple (This is the chamber that I do not load) Ruger factory logo grips I shot them once a month with 20 grains FFFg black powder and .457 round balls These have been well cared for and are in nice shape Lower, wider Super Black Hawk hammers Action job I realized after I took the pictures, that I left the loading plungers off. Of course, they will be on the guns! $1900 shipped to you unless you live in a restricted state (then they must go to your FFL) Thanks for looking --Dawg Edited 19 hours ago by Prairie Dawg, SASS #50329 Vice President -- Tusco Long Riders SASS #50329 Regulator JEDI GunFighter #275 STORM #114 SCORRS Newsletter Editor/Web Master -- Firelands Peacemakers Trustee -- Ohio Valley Vigilantes 2014 Ohio State Frontier Cartridge Gun Fighter Champion Tuco: " When you have to shoot, shoot, don't talk."
Texas Lizard Posted October 29, 2018 Posted October 29, 2018 Dawg...You either have the market cornered or you have a major breeding program... Texas Lizard
Prairie Dawg, SASS #50329 Posted October 29, 2018 Author Posted October 29, 2018 Yep, I have way too many Old Armies -- I'll still have a bunch if I sell these. I've never met an ROA or a USFA that I didn't like & want! --Dawg
Painted Mohawk SASS 77785 Posted October 31, 2018 Posted October 31, 2018 Howdy Dawg..I've learn't something..I didn't realise SB hammers fit the ROA's...are there alterations to fit ?
Prairie Dawg, SASS #50329 Posted October 31, 2018 Author Posted October 31, 2018 Good Morning Mohawk: They don't. The smith removes the hammer spur from a SBH hammer and welds it on to the ROA hammer. --Dawg
Rooster Ron Wayne Posted November 2, 2018 Posted November 2, 2018 Dawg must be on the prowl for Something New , He's Selling Some Ruger Old Army's ? Some things are No Longer Sacred
Texas Lizard Posted November 3, 2018 Posted November 3, 2018 Give it ride to the top...Someone please buy these...If I did I would need to cut barrels to make them useable...Too long and takes to much to pull them out like they are... Texas Lizard
Yul Lose Posted November 5, 2018 Posted November 5, 2018 On 11/3/2018 at 8:50 AM, Texas Lizard said: Give it ride to the top...Someone please buy these...If I did I would need to cut barrels to make them useable...Too long and takes to much to pull them out like they are... Texas Lizard Iffen you cut the barrels you’d ruin the romance.
Texas Lizard Posted November 5, 2018 Posted November 5, 2018 38 minutes ago, Yul Lose said: Iffen you cut the barrels you’d ruin the romance. Not a problem...Have an extra set of barrel that size around here somewhere... Texas Lizard
Cole Younger Requlator Posted November 27, 2018 Posted November 27, 2018 Hey -you said you have a bunch to sell- anything with the lower hammers and shorter barrels?
Prairie Dawg, SASS #50329 Posted November 27, 2018 Author Posted November 27, 2018 28 minutes ago, Cole Younger Requlator said: Hey -you said you have a bunch to sell- anything with the lower hammers and shorter barrels? Good Evening: Already sold 'em Had 7 to sell & sold 5 These two are left Thanks --Dawg
Eyesa Horg Posted December 28, 2018 Posted December 28, 2018 That's it Dawg--- Keep rubbing my nose in 'em
Prairie Dawg, SASS #50329 Posted December 29, 2018 Author Posted December 29, 2018 Hey Eyesa: Hope you & Ellie had a nice Christmas & all the best in 2019 --Dawg
Painted Mohawk SASS 77785 Posted December 30, 2018 Posted December 30, 2018 Hey Dawg...Iffin' you don't sell them ..send em' to me & I will take real good care of them..promise !!
Prairie Dawg, SASS #50329 Posted January 29, 2019 Author Posted January 29, 2019 Back up for late January
T-Square Posted February 24, 2019 Posted February 24, 2019 Sir, these would be my first adventure into BP. Are there any additional modifications you would suggest, and who could I get to complete those modifications? T-square
Prairie Dawg, SASS #50329 Posted February 24, 2019 Author Posted February 24, 2019 Hi T-Square: Sent ya a reply to your PM. Nothing needs to be done tho these. Boomstick Jay did a perfect job setting them up. --Dawg
Prairie Dawg, SASS #50329 Posted March 19, 2019 Author Posted March 19, 2019 Good Riddance Winter 2018-2019! Celebrate with a new-2-u set of fine Frontiersman guns! I take payments! Any schedule that suits you! --Dawg
Grizzly Dave Posted March 19, 2019 Posted March 19, 2019 Nice lookin' pair of Dawg Laigs you got there.... Of course after you sell them, they'll just be Hawg Laigs.... hahahahahahahahaha.
Red Eye Jim Posted March 19, 2019 Posted March 19, 2019 Dawg, You're making it very hard not to buy these...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.