Sagebrush Burns, SASS # 14226 Posted April 27, 2018 Share Posted April 27, 2018 Where would I find oversize bead front sight for a M-92 (clone) carbine? Link to comment Share on other sites More sharing options...
Prairie Dawg, SASS #50329 Posted April 27, 2018 Share Posted April 27, 2018 I had Manatee build one for me -- That was when he was making the Grabber front sight You might contact Happy Trails at The Smith Shop (http://www.thesmithshop.com) Or contact Nate Kiowa Jones at steves gunz (https://stevesgunz.com) --Dawg Link to comment Share on other sites More sharing options...
Sedalia Dave Posted April 27, 2018 Share Posted April 27, 2018 Sure Hits Sights They also fit 92's Link to comment Share on other sites More sharing options...
Trooper Ozzy Posted April 27, 2018 Share Posted April 27, 2018 +1 on the slip on sure hit sights. I cut it down by 1/2 length for the 92. Left it full length for the 73. Both were the large. Link to comment Share on other sites More sharing options...
LostVaquero Posted April 27, 2018 Share Posted April 27, 2018 Not sure what dove tail you rifle has but most are 3/8. http://www.longhunt.com/storelh/index.php?route=product/product&product_id=210 That is what I use. Link to comment Share on other sites More sharing options...
Amarillo Rattler Posted April 27, 2018 Share Posted April 27, 2018 JB Weld a 22LR fired brass on the current front sight. Biggest bead around and it’s free. Cut a full length slot with a Dremel to slide on from the rear. Lowers POI, not noticeable at our distances. Easy to remove with a 100 watt solder iron. Amarillo Rattler Link to comment Share on other sites More sharing options...
Rooster Ron Wayne Posted April 28, 2018 Share Posted April 28, 2018 Cleaned out Primer JB Welded on the front sight works great and Free too ! Link to comment Share on other sites More sharing options...
Warden Callaway Posted April 28, 2018 Share Posted April 28, 2018 We each have a rifle with big brass beads. I've not decided if I like them or not. I think I would be happier with an ivory bead about 1/16" or 3/32". Link to comment Share on other sites More sharing options...
Sagebrush Burns, SASS # 14226 Posted April 28, 2018 Author Share Posted April 28, 2018 Many thanks to all! Looks like I'll be in business real soon... Link to comment Share on other sites More sharing options...
Trailrider #896 Posted April 28, 2018 Share Posted April 28, 2018 Would brass doorknobs be SASS legal? Link to comment Share on other sites More sharing options...
Sagebrush Burns, SASS # 14226 Posted April 29, 2018 Author Share Posted April 29, 2018 10 hours ago, Trailrider #896 said: Would brass doorknobs be SASS legal? Only to knock against your noggin you old reprobate. Link to comment Share on other sites More sharing options...
Noz Posted April 29, 2018 Share Posted April 29, 2018 I tried the smallest sure hit and did not like it Knocked it off and went back to the small bead. Link to comment Share on other sites More sharing options...
Trailrider #896 Posted April 29, 2018 Share Posted April 29, 2018 13 hours ago, Sagebrush Burns, SASS # 14226 said: Only to knock against your noggin you old reprobate. Link to comment Share on other sites More sharing options...
Shooting Bull Posted April 29, 2018 Share Posted April 29, 2018 On 4/27/2018 at 5:03 PM, Rooster Ron Wayne said: Cleaned out Primer JB Welded on the front sight works great and Free too ! ^ This. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.