DeaconKC Posted April 5, 2021 Share Posted April 5, 2021 We made our retirement move in December and have been trying to get everything squared away. Today I got my bench built for my new reloading area! Hopefully by this time next week I will have the Dillon mounted and up and running! Woo hoo! Link to comment Share on other sites More sharing options...
Derringer Dan Posted April 6, 2021 Share Posted April 6, 2021 Great job. I went a similar direction after leaving behind my TuffShed shop (after retiring myself) Bought a Husky wooden workbench and went from there. Let’s see it when you get the Dillon up and running. Link to comment Share on other sites More sharing options...
watab kid Posted April 6, 2021 Share Posted April 6, 2021 looking good , i like your reloading digs Link to comment Share on other sites More sharing options...
Linn Keller, SASS 27332, BOLD 103 Posted April 6, 2021 Share Posted April 6, 2021 I'm seeing a tidy and well organized start: you're using your space efficiently and taking advantage of natural light, and the adjustable blinds are a definite plus! Looks like a dandy setup in the making! Link to comment Share on other sites More sharing options...
Tequila Shooter Posted April 6, 2021 Share Posted April 6, 2021 Glad to see you’re making progress. Looks like you might need some LED lights in the corner, or if you can hang a fixture right over the bench. Link to comment Share on other sites More sharing options...
DeaconKC Posted April 6, 2021 Author Share Posted April 6, 2021 10 hours ago, Derringer Dan said: Great job. I went a similar direction after leaving behind my TuffShed shop (after retiring myself) Bought a Husky wooden workbench and went from there. Let’s see it when you get the Dillon up and running. Will do! 10 hours ago, watab kid said: looking good , i like your reloading digs Thanks, when we got the place the Missus decided to paint the garage for me and we put in an epoxy floor. 5 hours ago, Linn Keller, SASS 27332, BOLD 103 said: I'm seeing a tidy and well organized start: you're using your space efficiently and taking advantage of natural light, and the adjustable blinds are a definite plus! Looks like a dandy setup in the making! Yup, light is good during daylight 2 hours ago, Tequila Shooter said: Glad to see you’re making progress. Looks like you might need some LED lights in the corner, or if you can hang a fixture right over the bench. And yup, will be putting in additional lights Link to comment Share on other sites More sharing options...
Joke 'um Posted April 6, 2021 Share Posted April 6, 2021 Now that you have a reloading bench, you'll need to think about getting a door. Link to comment Share on other sites More sharing options...
Joe Cross, SASS #13848 L Posted April 6, 2021 Share Posted April 6, 2021 What brand is the table? Size? Like the height adjustment and looks like something I could use in my reloading area. Thanks. Link to comment Share on other sites More sharing options...
Crazy Gun Barney, SASS #2428 Posted April 6, 2021 Share Posted April 6, 2021 The hammer will come in handy testing for duds... Link to comment Share on other sites More sharing options...
DeaconKC Posted April 6, 2021 Author Share Posted April 6, 2021 Got the bench at Sam's Club, an Ultra HD bench. Cost $149 and is a beast. Great instructions! Went together easily, put a strip on the back and left edge to keep stray parts from rolling off it. I think I am going to get some T nuts and put them in from underneath so I can mount my Lee turret or Load alls easily and removable. I have it high enough I am going to keep a small rolling cart under it. Link to comment Share on other sites More sharing options...
Derringer Dan Posted April 6, 2021 Share Posted April 6, 2021 49 minutes ago, DeaconKC said: Got the bench at Sam's Club, an Ultra HD bench. Cost $149 and is a beast. Great instructions! Went together easily, put a strip on the back and left edge to keep stray parts from rolling off it. I think I am going to get some T nuts and put them in from underneath so I can mount my Lee turret or Load alls easily and removable. I have it high enough I am going to keep a small rolling cart under it. I didn’t want to bogart your post with any of my pics, but I’ve got to show you what I did. Due to the fact that I wasn’t able to drag my TuffShed along with me, I was able to earmark some monies to rebuild the loading area. Whatcha think about this- I located the studs in the wall and anchored the table. There is no movement or shudder in the table at all. And the anvil on the vise rings true. Very happy to with the outcome. Once I heal up, the drywall will go up Link to comment Share on other sites More sharing options...
Badger Mountain Charlie SASS #43172 Posted April 6, 2021 Share Posted April 6, 2021 Now to find something to load! Nice looking set up. Link to comment Share on other sites More sharing options...
DeaconKC Posted April 6, 2021 Author Share Posted April 6, 2021 1 hour ago, Derringer Dan said: I didn’t want to bogart your post with any of my pics, but I’ve got to show you what I did. Due to the fact that I wasn’t able to drag my TuffShed along with me, I was able to earmark some monies to rebuild the loading area. Whatcha think about this- I located the studs in the wall and anchored the table. There is no movement or shudder in the table at all. And the anvil on the vise rings true. Very happy to with the outcome. Once I heal up, the drywall will go up Very, very nice! Link to comment Share on other sites More sharing options...
Derringer Dan Posted April 7, 2021 Share Posted April 7, 2021 2 hours ago, DeaconKC said: Very, very nice! The ability to have cabinets that can roll in and out from the bottom was a huge bonus due to the tight spaces I was dealing with. Again, didn’t mean to hijack your thread... looking forward to seeing your completed setup!! Link to comment Share on other sites More sharing options...
Imis Twohofon,SASS # 46646 Posted April 7, 2021 Share Posted April 7, 2021 I just upgraded my bench with a steel organizer, Item 2KEJ9 from WWGrainger. Look it up it is great and reasonable in price. Imis Link to comment Share on other sites More sharing options...
DeaconKC Posted April 7, 2021 Author Share Posted April 7, 2021 56 minutes ago, Derringer Dan said: The ability to have cabinets that can roll in and out from the bottom was a huge bonus due to the tight spaces I was dealing with. Again, didn’t mean to hijack your thread... looking forward to seeing your completed setup!! Definitely, when building the bench I measured the rollout rack I plan on using to make sure I would have clearance under the bench for it. 38 minutes ago, Imis Twohofon,SASS # 46646 said: I just upgraded my bench with a steel organizer, Item 2KEJ9 from WWGrainger. Look it up it is great and reasonable in price. Imis That is nice, the 48" one is tempting but I already have plans for that space to hold all my Dillon toolheads for the 550. Plus, the Missus said something about how neat metal pegboard pack would look. Who am I to argue that? Link to comment Share on other sites More sharing options...
Linn Keller, SASS 27332, BOLD 103 Posted April 7, 2021 Share Posted April 7, 2021 Anchoring the bench to the wall is a definite plus! Given you have a good heavy machine vise, you'll want it that solid! Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted April 7, 2021 Share Posted April 7, 2021 17 hours ago, DeaconKC said: Got the bench at Sam's Club, an Ultra HD bench. Cost $149 and is a beast. Great instructions! Went together easily, put a strip on the back and left edge to keep stray parts from rolling off it. I think I am going to get some T nuts and put them in from underneath so I can mount my Lee turret or Load alls easily and removable. I have it high enough I am going to keep a small rolling cart under it. I have 2 of those benches. They are very well made, and you couldn't duplicate them for the price. OLG Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.