Rube Burrows Posted November 7, 2022 Posted November 7, 2022 I am looking to buy some 10 gauge hulls. Ballistic Products do not have any in stock and I don't know of anywhere else to get them. If you have any you'd sell or know where to get them pleaset let me know.
Horace Patootie, SASS #35798 Posted November 7, 2022 Posted November 7, 2022 The last ones I bought from Ballistic Products were already primed. No hazmat on primed hulls. I see they are out of stock now. Horace
Rube Burrows Posted November 7, 2022 Author Posted November 7, 2022 1 hour ago, Horace Patootie, SASS #35798 said: The last ones I bought from Ballistic Products were already primed. No hazmat on primed hulls. I see they are out of stock now. Horace I know. I checked them before posting here. A google search did not show me anyone else who sells them. I’d take primed or Unprimed.
Bad Company, SASS #20195 Posted November 8, 2022 Posted November 8, 2022 None around. I bought some loaded shells, cut em, emptied them. Pricey but they work.
Rube Burrows Posted November 8, 2022 Author Posted November 8, 2022 49 minutes ago, Bad Company, SASS #20195 said: None around. I bought some loaded shells, cut em, emptied them. Pricey but they work. Yeah, that’s definitely a costly way of doing it.
Slapshot Posted November 8, 2022 Posted November 8, 2022 I'm fixing to pick up a double 10. So I have been looking for fired hulls but have came up empty for a month now. I guess I'll be going with brass. Extremely pricey but will last long time.
Tennessee Snuffy Posted November 8, 2022 Posted November 8, 2022 If you go brass then I recommend Rocky Mountain Cartridge (RMC). They are not cheap but should last a long time provided someone does not step on them. Also go ahead and buy the RMC reloading kit. Best there is and simple.
Warden Callaway Posted November 8, 2022 Posted November 8, 2022 Au yes, the struggles and experience of loading the 10 gauge.
Rube Burrows Posted November 8, 2022 Author Posted November 8, 2022 5 hours ago, Slapshot said: I'm fixing to pick up a double 10. So I have been looking for fired hulls but have came up empty for a month now. I guess I'll be going with brass. Extremely pricey but will last long time. Yeah, I have been looking since I knew I was going to be getting this gun. Brass is not hard to find but not cheap. I plan to pick up some for my black powder loads but I am not sure about shooting smokless in brass. I would think the brass would not like the pressure spikes. I want to find some plastic hulls that I can cut down and use for my 1901 smokeless loads.
Dallas McBoomboom Posted November 8, 2022 Posted November 8, 2022 7 hours ago, Slapshot said: I'm fixing to pick up a double 10. So I have been looking for fired hulls but have came up empty for a month now. I guess I'll be going with brass. Extremely pricey but will last long time. You're right there, last time I looked, the brass 10 ga were around $11/ea.
Blackwater 53393 Posted November 8, 2022 Posted November 8, 2022 Shooting smokeless in brass shells is okay. I have some original Winchester 10ga brass shells that came smokeless. I haven’t bought any in several years, but GAD Custom Ammunition used to sell 2 7/8” Federal shells in boxes of 25 and bags of 100 hulls cut to size.
Will Burn Powder Posted November 8, 2022 Posted November 8, 2022 My nephew is selling off my brother’s stuff since he passed. There are 49 primed 3 1/2” once fired. He is asking $45.00 shipped?
Dallas McBoomboom Posted November 8, 2022 Posted November 8, 2022 Just now, Will Burn Powder said: My nephew is selling off my brother’s stuff since he passed. There are 49 primed 3 1/2” once fired. He is asking $45.00 shipped? I'd be cautious, it appears a lot of those have been roll crimped. I've never had any luck re using roll crimped plastic hulls.
Bad Company, SASS #20195 Posted November 8, 2022 Posted November 8, 2022 10 ga waterfowl loads 25 for about $40 a lot cheaper than $13 apiece for brass.
Will Burn Powder Posted November 8, 2022 Posted November 8, 2022 There is also a bag of once fired 63 total mixed brands.
Dallas McBoomboom Posted November 8, 2022 Posted November 8, 2022 Sorry, I didn't see they were still 3½. If you're going to be trimming to 2⅞, you should be fine.
Will Burn Powder Posted November 8, 2022 Posted November 8, 2022 Also have BP uncut wads and regular 10 gage wads.
Blackwater 53393 Posted November 8, 2022 Posted November 8, 2022 Will! If Rube doesn’t want these, I will take all of it. I have some 10ga stuff already and can make do, but I’m always looking for extra! Rube! You got first dibs!!
Blackwater 53393 Posted November 8, 2022 Posted November 8, 2022 Dallas! You need a skiver to re-use roll crimped plastic shells. It straightens the crimped portion of the hull so that you can reload and re-crimp the shell. See Ballistic Products for this and the related tools to do all of your roll crimping operations.
Rube Burrows Posted November 8, 2022 Author Posted November 8, 2022 1 hour ago, Blackwater 53393 said: Shooting smokeless in brass shells is okay. I have some original Winchester 10ga brass shells that came smokeless. I haven’t bought any in several years, but GAD Custom Ammunition used to sell 2 7/8” Federal shells in boxes of 25 and bags of 100 hulls cut to size. I had never heard of GAD Custom Ammunition so I googled them to find their page. Did not see a page for them but did see many many complaints about the company.
Rube Burrows Posted November 8, 2022 Author Posted November 8, 2022 1 hour ago, Will Burn Powder said: There is also a bag of once fired 63 total mixed brands. Sending PM.
Dallas McBoomboom Posted November 8, 2022 Posted November 8, 2022 45 minutes ago, Blackwater 53393 said: Dallas! You need a skiver to re-use roll crimped plastic shells. It straightens the crimped portion of the hull so that you can reload and re-crimp the shell. See Ballistic Products for this and the related tools to do all of your roll crimping operations. I will absolutely look for that. I've been looking for something like that, and messed around with trying to make something, but never had any luck. Thanks!
Will Burn Powder Posted November 8, 2022 Posted November 8, 2022 1 hour ago, Blackwater 53393 said: Will! If Rube doesn’t want these, I will take all of it. I have some 10ga stuff already and can make do, but I’m always looking for extra! Rube! You got first dibs!! Rube bought the whole package
Blackwater 53393 Posted November 8, 2022 Posted November 8, 2022 Just now, Will Burn Powder said: Rube bought the whole package Good deal!! Like I said. I have ample supply, but I’m always looking out for this stuff. Hope Rube puts it all to good use!!
Blackwater 53393 Posted November 8, 2022 Posted November 8, 2022 1 hour ago, Rube Burrows said: I had never heard of GAD Custom Ammunition so I googled them to find their page. Did not see a page for them but did see many many complaints about the company. I read some of that myself. Like I said, it’s been several years.
Slapshot Posted November 8, 2022 Posted November 8, 2022 Great score, you guys are amazing at helping people out.
Rube Burrows Posted November 8, 2022 Author Posted November 8, 2022 3 hours ago, Blackwater 53393 said: Good deal!! Like I said. I have ample supply, but I’m always looking out for this stuff. Hope Rube puts it all to good use!! Thanks pard. I will surely put it to good use. I’m not sure on the wads and stuff because I’m new to the 10g stuff but I figured I’d figure that out soon enough.
Rube Burrows Posted November 8, 2022 Author Posted November 8, 2022 1 hour ago, Slapshot said: Great score, you guys are amazing at helping people out. Absolutely!!! The people here and in this shooting community are just fantastic overall.
Dallas McBoomboom Posted November 8, 2022 Posted November 8, 2022 5 hours ago, Blackwater 53393 said: Dallas! You need a skiver to re-use roll crimped plastic shells. It straightens the crimped portion of the hull so that you can reload and re-crimp the shell. See Ballistic Products for this and the related tools to do all of your roll crimping operations. I just found that thing, I'd have sworn I looked at (and owned) everything 10 gauge related that they sold. Thanks again pard!
Blackwater 53393 Posted November 9, 2022 Posted November 9, 2022 1 hour ago, Dallas McPewPew said: I just found that thing, I'd have sworn I looked at (and owned) everything 10 gauge related that they sold. Thanks again pard! You are more than welcome!! Glad to be of some help!
Caladisi kid Posted November 11, 2022 Posted November 11, 2022 Hello all you 10g shootists, I just got off the phone with Track of the Wolf and they have brass 10g in 2-5/8" and 2-7/8" as well as all of the wads and shot/powder over cards! I ordered a bunch. Brass was $8-10 a piece depending on size. You only live once!
Sedalia Dave Posted November 11, 2022 Posted November 11, 2022 BPI has Cheddite Primed 10 ga hulls in stock.
Tennessee Snuffy Posted November 11, 2022 Posted November 11, 2022 Need to be careful concerning primers sizes in 10 ga brass. RMC takes a 209 shot shell primer and others take a large pistol primer (I believe).
trvlrmn Posted November 11, 2022 Posted November 11, 2022 Got a prompt from Ballistic Products this AM. New 3 1/2" primed Cheddite 10 gauge hulls now in stock for $32.99/bag of 50. Limit 5 bags/customer. https://www.ballisticproducts.com/10-gauge-hulls/products/75/ trvlr
Slapshot Posted November 11, 2022 Posted November 11, 2022 10 hours ago, trvlrmn said: Got a prompt from Ballistic Products this AM. New 3 1/2" primed Cheddite 10 gauge hulls now in stock for $32.99/bag of 50. Limit 5 bags/customer. https://www.ballisticproducts.com/10-gauge-hulls/products/75/ trvlr Thank you ! Just put in a order for 100 hulls and some OS and OP cards.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.