Jackaroo, # 29989 Posted August 27 Share Posted August 27 (edited) Anyone out there who can help me find one of these, or where can I purchase one please. It's an extractor for a H & R Buffalo Classic Rifle Model 1871 45/70 Serial # HX2191134 You see the end has broken off on left hand side. Thanks in advance. Edited August 27 by Jackaroo, # 29989 Quote Link to comment Share on other sites More sharing options...
Boulder Canyon Bob# 32052L Posted August 27 Share Posted August 27 These guys look like they might have it, but they're Canadian sales only. You might have to do a work around for that. Handi-Rifle™ - Centerfire Rifles - H&R 1871® - OEM Parts (gravelagency.com) Quote Link to comment Share on other sites More sharing options...
Boulder Canyon Bob# 32052L Posted August 27 Share Posted August 27 Numerich's site says they have them. Ejector/Extractor, .45-70 (Ejects Shell From Chamber) (gunpartscorp.com) Quote Link to comment Share on other sites More sharing options...
I. M. Crossdraw, SASS# 8321 Posted August 27 Share Posted August 27 31 minutes ago, Boulder Canyon Bob# 32052L said: Numerich's site says they have them. Ejector/Extractor, .45-70 (Ejects Shell From Chamber) (gunpartscorp.com) This. Quote Link to comment Share on other sites More sharing options...
Jackaroo, # 29989 Posted August 29 Author Share Posted August 29 Thanks pards, Quote Link to comment Share on other sites More sharing options...
Jackaroo, # 29989 Posted August 29 Author Share Posted August 29 Well there you go, more control, numerich website not allowed access in my region. 1 Quote Link to comment Share on other sites More sharing options...
Wolf Creek Bodine Posted August 29 Share Posted August 29 8 hours ago, Jackaroo, # 29989 said: Well there you go, more control, numerich website not allowed access in my region. I can buy it, and forward it to you, if you like. I just need to know what to put on the customs form as contents, so as not to drive your government insane. 1 Quote Link to comment Share on other sites More sharing options...
Eyesa Horg Posted August 29 Share Posted August 29 36 minutes ago, Wolf Creek Bodine said: I can buy it, and forward it to you, if you like. I just need to know what to put on the customs form as contents, so as not to drive your government insane. Oddly shaped piece of art. Quote Link to comment Share on other sites More sharing options...
AlOvera Posted August 29 Share Posted August 29 List as a machine tool or part. Because it is!! No need to mention anything about a -un part. 2 Quote Link to comment Share on other sites More sharing options...
Bailey Creek,5759 Posted August 29 Share Posted August 29 Have you tried any local weld shops? Someone might be able fabricate something. 1 Quote Link to comment Share on other sites More sharing options...
I. M. Crossdraw, SASS# 8321 Posted August 29 Share Posted August 29 1 hour ago, Bailey Creek,5759 said: Have you tried any local weld shops? Someone might be able fabricate something. Have it TIG weld to fill area and shape and fitted to barrel. It looks like it just need a little bit of TIG welding. Might work. Quote Link to comment Share on other sites More sharing options...
Sedalia Dave Posted August 29 Share Posted August 29 FYI Postage to OZ is very expensive and will be in excess of $100.00 Quote Link to comment Share on other sites More sharing options...
Wolf Creek Bodine Posted August 31 Share Posted August 31 (edited) Jackaroo, apparently I can't message you here on the forum. I'll then calculate an exact shipping cost, and you can decide if this is how you want to proceed or not, OK? EMAIL FORWARDED VIA PM PWB Edited September 1 by PaleWolf Brunelle, #2495L remove personal contact info 1 Quote Link to comment Share on other sites More sharing options...
Eyesa Horg Posted August 31 Share Posted August 31 8 hours ago, Wolf Creek Bodine said: Jackaroo, apparently I can't message you here on the forum. Please email me your shipping address at xxxx I'll then calculate an exact shipping cost, and you can decide if this is how you want to proceed or not, OK? Be sure to delete your email from your post after he contacts you! Quote Link to comment Share on other sites More sharing options...
John Kloehr Posted August 31 Share Posted August 31 (edited) 8 hours ago, Wolf Creek Bodine said: Jackaroo, apparently I can't message you here on the forum. Please email me your shipping address at [deleted] I'll then calculate an exact shipping cost, and you can decide if this is how you want to proceed or not, OK? Make sure any emails are from Jackaroo. Expect others! Edited August 31 by John Kloehr Quote Link to comment Share on other sites More sharing options...
Wolf Creek Bodine Posted August 31 Share Posted August 31 Thanks, to those looking out for me. I wasn't aware we had these kinds of issues with emails being posted, but I've already gotten suspicious stuff, so obviously we do! Again, thanks for watching my back, pards! 3 Quote Link to comment Share on other sites More sharing options...
PaleWolf Brunelle, #2495L Posted September 1 Share Posted September 1 @Jackaroo, # 29989 Check your PMs Quote Link to comment Share on other sites More sharing options...
Jackaroo, # 29989 Posted September 2 Author Share Posted September 2 On 8/31/2024 at 1:58 PM, Wolf Creek Bodine said: Jackaroo, apparently I can't message you here on the forum. I'll then calculate an exact shipping cost, and you can decide if this is how you want to proceed or not, OK? EMAIL FORWARDED VIA PM PWB Hi Wolf, I have managed to get this fixed up, thank you for your offer. Regards Jack. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.