Mountain Man Gramps Posted October 23, 2019 Share Posted October 23, 2019 Anyone wanting to part with a rotary tumbler to tumble brass in stainless steel pins? Link to comment Share on other sites More sharing options...
Tyrel Cody Posted October 23, 2019 Share Posted October 23, 2019 I recommend one of these for a lower price option: https://www.frankfordarsenal.com/case-cleaning/case-cleaning-tumblers/rotary-tumbler-lite/1097878.html#start=1 Link to comment Share on other sites More sharing options...
Mountain Man Gramps Posted October 23, 2019 Author Share Posted October 23, 2019 I should add I want to clean BP brass including the primer pocket. I’ve read that a rotating tumbler with pins is the best way to do it. Tyrel, I’ll check it out. Thanks Link to comment Share on other sites More sharing options...
Prairie Dawg, SASS #50329 Posted October 23, 2019 Share Posted October 23, 2019 Ceramic also works very well. Been using a Thumbler’s tumbler with ceramic for many yeArs to clean my BP brass Link to comment Share on other sites More sharing options...
Mountain Man Gramps Posted October 23, 2019 Author Share Posted October 23, 2019 Prairie Dawg, do you find ceramic cleans the primer pockets properly or are additional steps needed? I’m planning on doing a good hot soapy soak in In an ultrasonic cleaner as a first step. Link to comment Share on other sites More sharing options...
William Hendershot Posted October 23, 2019 Share Posted October 23, 2019 I have two Thumlers tumblers setup for SS Pin cleaning. Love the way the primer pockets get cleaned with no additional steps. Got the last one for $10 used and bought a high speed replacement motor for just under $100 and that thing is amazing. Just a word of caution, be careful if you use Nickel plated brass as the pins will wear the nickel off if left in too long, ask me how I know. I used to like to used Nickel for my BP loads. Link to comment Share on other sites More sharing options...
Sedalia Dave Posted October 23, 2019 Share Posted October 23, 2019 1 hour ago, Mountain Man Gramps said: Prairie Dawg, do you find ceramic cleans the primer pockets properly or are additional steps needed? I’m planning on doing a good hot soapy soak in In an ultrasonic cleaner as a first step. Skip the ultra-sonic. Deprime using a universal decapping die and tumble with the SS pins. They seem to do a better job on primer pockets. Link to comment Share on other sites More sharing options...
Prairie Dawg, SASS #50329 Posted October 23, 2019 Share Posted October 23, 2019 The Ceramic does a good job of cleaning the primer pocket. Mine have been shot many times using this process, and I have NEVER had primer issues. I use small ceramic cylinders because that's what was available when I started wet tumbling many years ago. Bought 'em from Dick Dastardly of Big Lube fame. They didn't have steel pins then as far as I know, so I never even considered them. Anyway, I have been tumbling with water, dish soap, and ceramic all these years, and have never been disappointed. Ceramic does not wear the nickel off of nickel brass, even if you tumble it overnight (forgetful me!) I put the brass in a canvas bag at the shoot, deprime and tumble one to three days later. Has always been satisfactory. Brass is always a dull brass-color. I've never cared for shiny brass, so this does not bother me. --Dawg Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted October 23, 2019 Share Posted October 23, 2019 4 hours ago, Prairie Dawg, SASS #50329 said: Ceramic also works very well. Been using a Thumbler’s tumbler with ceramic for many yeArs to clean my BP brass What I use now and what I will continue to use. Get the low speed model. OLG Link to comment Share on other sites More sharing options...
Prairie Dawg, SASS #50329 Posted October 24, 2019 Share Posted October 24, 2019 +1 to the low speed model! Link to comment Share on other sites More sharing options...
Yul Lose Posted October 24, 2019 Share Posted October 24, 2019 MMG, you should have said something the other day when you were over here, I’d have shown you my Rebel 17. Don’t buy ceramic media or steel pins I’ll give you some at the next Bandidos match. Let me know which kind you want and I’ll stick it in my gun cart. Link to comment Share on other sites More sharing options...
Sedalia Dave Posted October 24, 2019 Share Posted October 24, 2019 If I had it to do over again I would have spent the money for a Rebel 17 rather than buy a Thumlers model B Link to comment Share on other sites More sharing options...
Mountain Man Gramps Posted October 24, 2019 Author Share Posted October 24, 2019 1 hour ago, Yul Lose said: MMG, you should have said something the other day when you were over here, I’d have shown you my Rebel 17. Don’t buy ceramic media or steel pins I’ll give you some at the next Bandidos match. Let me know which kind you want and I’ll stick it in my gun cart. Yul, you’re too kind! I’ll take whatever you recommend. I’ve been doing more reading in Venturino’s and Garbe’s “Black Powder Cartridge Loading Primer” and realized I don’t have the right equipment to clean the cases after firing. MMG Link to comment Share on other sites More sharing options...
Yul Lose Posted October 24, 2019 Share Posted October 24, 2019 2 minutes ago, Mountain Man Gramps said: Yul, you’re too kind! I’ll take whatever you recommend. I’ve been doing more reading in Venturino’s and Garbe’s “Black Powder Cartridge Loading Primer” and realized I don’t have the right equipment to clean the cases after firing. MMG I’ve got you covered. Link to comment Share on other sites More sharing options...
cajun bandit Posted October 25, 2019 Share Posted October 25, 2019 have a twin drum tumbler with ss pins [harbor freight] $45.00 shipped Link to comment Share on other sites More sharing options...
Mountain Man Gramps Posted November 4, 2019 Author Share Posted November 4, 2019 It sounds like the Extreme Tumblers Rebel 17 and Thumbler Tumbler brand (not sure which model) are the most recommended (and most expensive). Since I’m not in a hurry, I think I’ll wait around for a good buy. But I don’t know how to equate the weight rating of a tumbler to the number of rounds it will hold. Can anyone give me an idea? As of the moment, I’ll be cleaning .38spec/.357mag and .38-55. Yul, I agree with your recommendation of Dillon Media separators. They’re the only ones I’ve seen with a metal handle and a shaft that locks. I think I’ll pick up the one that matches the round capacity of the tumbler. Link to comment Share on other sites More sharing options...
Springfield Slim SASS #24733 Posted November 4, 2019 Share Posted November 4, 2019 I used my Thumlers B slow speed model and it didn't do nearly the job my Frankfort Arsenal unit did, plus it is very limited on how many pieces of brass you can do. If you are a single shooter than maybe it will work but I reload for 4 and it just took too much time. FWIW I find my Lyman 1200 to be too small also, so I mostly use my Lyman 2400 vibratory cleaner for all my smokeless brass. I also tried the ceramic media but found it sometimes got stuck in bottleneck brass, whereas the stainless pins never do. YMMV I use the RCBS media separator, and yes, it is very lightweight compared to my Dillon separator, but it works, and it came free with my Frankfort Arsenal tumbler, so I'll use it 'til it breaks. Link to comment Share on other sites More sharing options...
Mountain Man Gramps Posted November 4, 2019 Author Share Posted November 4, 2019 I think I found the answer to my question by comparing the specs of various tumblers. They are spec'ed at holding about a 1000 rounds of .223 for every 5 pounds/7 liters of tumbler capacity. So I supposed I can safely assume around 1500 rounds of .38spec/.357mag and around 600-700 rounds of .38-55 for the same capacity tumbler. Link to comment Share on other sites More sharing options...
Tequila Shooter Posted November 4, 2019 Share Posted November 4, 2019 I use S/S pins, for you pards using ceramic how do you separate the ceramic from the case? Sometimes I'll get a couple of pins that dry in the case and use a magnet to pull them out, but that wouldn't work with ceramic. Link to comment Share on other sites More sharing options...
Springfield Slim SASS #24733 Posted November 4, 2019 Share Posted November 4, 2019 I have the larger Franford tumbler and no way could you do 600 38-55. I think their specs are a bit imaginary. Link to comment Share on other sites More sharing options...
Yul Lose Posted November 4, 2019 Share Posted November 4, 2019 1 hour ago, Mountain Man Gramps said: I think I found the answer to my question by comparing the specs of various tumblers. They are spec'ed at holding about a 1000 rounds of .223 for every 5 pounds/7 liters of tumbler capacity. So I supposed I can safely assume around 1500 rounds of .38spec/.357mag and around 600-700 rounds of .38-55 for the same capacity tumbler. I doubt the 600-700 38-55 cases. I’ve found I get better polishing results by loading the tumbler a lot less than full capacity and your tumbler motor will last a lot longer also. I usually load about 2/3rds brass and then the water to about 2” above cases and then the cleaning and polishing agents and media. You’ll probably come up with your own recipe and procedures after you’ve done it enough. I’ll see you at the Duststorm on Saturday and we’ll talk more, I enjoy our visits. Link to comment Share on other sites More sharing options...
Sedalia Dave Posted November 4, 2019 Share Posted November 4, 2019 2 hours ago, Tequila Chase said: I use S/S pins, for you pards using ceramic how do you separate the ceramic from the case? Sometimes I'll get a couple of pins that dry in the case and use a magnet to pull them out, but that wouldn't work with ceramic. Same way I seperate SS media from the cases. I fill my RCBS media seperator with enough water so that as I turn the drum cases rise up out of the water and fall back in. This action washes the media out of the cases. As I typically change the water three times and turn the drum at least 2 minutes each time. After 4 years of seprarating media this way, I have yet to find any media that remained in a case. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.