Ripsaw Posted February 10, 2021 Share Posted February 10, 2021 Discovered my new Wranglers don't fire by the "slip hammer" method. Anyone know why? Is it me or are they designed this way? Thoughts? And how easy to change? Already put 15 lb hammer springs and lightened up the trigger a tad. Otherwise nice little guns. As with some other clubs, due to the ammo situation, we are allowing competitors to shoot .22LR if they want. Thought I'd get a pair just to get familiar with them in case we get competitors who shoot them. (Any excuse for another pair of revolvers...LOL) Link to comment Share on other sites More sharing options...
Major Crimes Posted February 10, 2021 Share Posted February 10, 2021 I have the same issue with the Uberti Short Stroke Cattleman. It will invariably over cock and when you fire it misses the centre of the cartridge. I don't slip hammer but the problem is if my finger is taking up some trigger slack then it over cocks. Link to comment Share on other sites More sharing options...
Eyesa Horg Posted February 10, 2021 Share Posted February 10, 2021 13 hours ago, Ripsaw said: Discovered my new Wranglers don't fire by the "slip hammer" method. Anyone know why? Is it me or are they designed this way? Thoughts? And how easy to change? Already put 15 lb hammer springs and lightened up the trigger a tad. Otherwise nice little guns. As with some other clubs, due to the ammo situation, we are allowing competitors to shoot .22LR if they want. Thought I'd get a pair just to get familiar with them in case we get competitors who shoot them. (Any excuse for another pair of revolvers...LOL) How'd that light of a spring work out? I just ordered an 17# from Wolff and they seemed to think it would be too light. Link to comment Share on other sites More sharing options...
Bo Dacious Posted February 11, 2021 Share Posted February 11, 2021 23 hours ago, Ripsaw said: Discovered my new Wranglers don't fire by the "slip hammer" method. Anyone know why? Is it me or are they designed this way? Thoughts? And how easy to change? Already put 15 lb hammer springs and lightened up the trigger a tad. Otherwise nice little guns. As with some other clubs, due to the ammo situation, we are allowing competitors to shoot .22LR if they want. Thought I'd get a pair just to get familiar with them in case we get competitors who shoot them. (Any excuse for another pair of revolvers...LOL) What specifically are they they failing to do? I have a pair and they operate just as my vaqueros do. Link to comment Share on other sites More sharing options...
Bo Dacious Posted February 11, 2021 Share Posted February 11, 2021 10 hours ago, Eyesa Horg said: How'd that light of a spring work out? I just ordered an 17# from Wolff and they seemed to think it would be too light. I put 14# springs in mine and they are choosy as to the ammo, not just to brands but to lot numbers. Link to comment Share on other sites More sharing options...
Ripsaw Posted February 11, 2021 Author Share Posted February 11, 2021 12 hours ago, Eyesa Horg said: How'd that light of a spring work out? I just ordered an 17# from Wolff and they seemed to think it would be too light. I tried a 14 lb spring first and had FTF's. 15lb spring works fine. 2 hours ago, Bo Dacious said: What specifically are they they failing to do? I have a pair and they operate just as my vaqueros do. It feels like the trigger is impeding the fall of the hammer--you can feel the trigger move as the hammer falls when slip hammering. Link to comment Share on other sites More sharing options...
Waimea Posted February 11, 2021 Share Posted February 11, 2021 2 hours ago, Bo Dacious said: I put 14# springs in mine and they are choosy as to the ammo, not just to brands but to lot numbers. Gamer Link to comment Share on other sites More sharing options...
Bo Dacious Posted February 11, 2021 Share Posted February 11, 2021 12 hours ago, Ripsaw said: I tried a 14 lb spring first and had FTF's. 15lb spring works fine. It feels like the trigger is impeding the fall of the hammer--you can feel the trigger move as the hammer falls when slip hammering. Both of mine slip hammer just fine. Internally they are just like all the other single action rugers. There is one extra part but it doesn't move, its there to keep the pawl from wearing the frame. Link to comment Share on other sites More sharing options...
John Boy Posted February 11, 2021 Share Posted February 11, 2021 Whenever any firearm fails to do a slip hammer firing, they have a disconnect to the sear. No disconnect, have at it. Link to comment Share on other sites More sharing options...
Dillon Blue Posted February 11, 2021 Share Posted February 11, 2021 Mine will slip hammer without a problem with 17# springs installed. Is the front top edge of your transfer bar catching on the bottom of the firing pin possibly? Mine is polished up to avoid that. Link to comment Share on other sites More sharing options...
Ripsaw Posted February 16, 2021 Author Share Posted February 16, 2021 OK, switched out the 15 lb springs for 17s and then 19s and the guns will slip hammer reliably now. I don't know why I didn't try heavier springs before asking this question. Link to comment Share on other sites More sharing options...
Captain Bill Burt Posted February 17, 2021 Share Posted February 17, 2021 Our pair comes in Thursday. I guess I should order the springs now. Any tips for additional mods needed? Link to comment Share on other sites More sharing options...
Marshal Chance Morgun Posted February 17, 2021 Share Posted February 17, 2021 1 hour ago, Captain Bill Burt said: Our pair comes in Thursday. I guess I should order the springs now. Any tips for additional mods needed? Gamer Link to comment Share on other sites More sharing options...
Bo Dacious Posted February 17, 2021 Share Posted February 17, 2021 13 hours ago, Captain Bill Burt said: Our pair comes in Thursday. I guess I should order the springs now. Any tips for additional mods needed? yep, take some off the loading gate spring, it is twice as hard to open as a vaquero and smaller. Also I had 1 loading gate that still had casting flash on it, it was galling the frame making it even harder to open. Link to comment Share on other sites More sharing options...
Eyesa Horg Posted February 17, 2021 Share Posted February 17, 2021 13 hours ago, Captain Bill Burt said: Our pair comes in Thursday. I guess I should order the springs now. Any tips for additional mods needed? I ordered the 17/30 Wolff springs 2 weeks ago. They still haven't shipped. The web site says 14-18 days to ship. Just FYI, order now! Link to comment Share on other sites More sharing options...
Captain Bill Burt Posted February 17, 2021 Share Posted February 17, 2021 1 hour ago, Eyesa Horg said: I ordered the 17/30 Wolff springs 2 weeks ago. They still haven't shipped. The web site says 14-18 days to ship. Just FYI, order now! I ordered two sets yesterday! Link to comment Share on other sites More sharing options...
Krazy Kajun Posted February 17, 2021 Share Posted February 17, 2021 32 minutes ago, Captain Bill Burt said: I ordered two sets yesterday! Capt. Bill, I ordered two sets of Wolf springs for my pair of Ruger Wranglers and it took almost a month for them to arrive. I installed them and it makes a world of difference. Worth the wait. Kajun Link to comment Share on other sites More sharing options...
Eyesa Horg Posted February 17, 2021 Share Posted February 17, 2021 Now for grips. How come we can never be happy with the way they come? The Missus has finally caught on. When I mention the cost of a gun, she now says "And how much for the accessories and reloading stuff"? "Not to mention the parts you need to change just cuz!" Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.