Jump to content
SASS Wire Forum

The Original Lumpy Gritz

Members
 View Profile  See their activity

  • Posts

    27,877

  • Joined

  • Last visited

  • Days Won

    20

 Content Type 

Everything posted by The Original Lumpy Gritz

  1. The Original Lumpy Gritz
    Same here
  2. The Original Lumpy Gritz
    Rinse twice when the cases come out of the tumble. Dry in oven, if you can.
  3. The Original Lumpy Gritz
    Got up to 71 in SW, SGF. Wind was strong enough that we took down the bird feeders. Now they are say'n a good chance of snow by Monday.
  4. The Original Lumpy Gritz
    I use Amazon batteries in my old Makita tools. They last about 5 yrs.
  5. The Original Lumpy Gritz
    They are silver soldered in place.
  6. The Original Lumpy Gritz
    I have a Longhunter and it doesn't look anything like that.
  7. The Original Lumpy Gritz
    Yup Total of 33 rnds with one reload.
  8. The Original Lumpy Gritz
    I carry the std in my Glock 19 gen5, My 1 reload is Glock 17 mag.
  9. The Original Lumpy Gritz
    Yes, common.
  10. The Original Lumpy Gritz
    Did you shorten the hammer cocking rods at all?
  11. The Original Lumpy Gritz
    Tar and feather
  12. The Original Lumpy Gritz
    Who did the work on it?
  13. The Original Lumpy Gritz
    Any sort of freedom in Commiefornia never does. Why we left, and moved to America(Missouri).
  14. The Original Lumpy Gritz
    .009 is pushing the high end. But, don't fix what ain't broke.
  15. The Original Lumpy Gritz
    Wonder what happens to the bulk ammo that's in route to CA?
  16. The Original Lumpy Gritz
    Much depends on the prefix to the serial number. Any under 06 is sketchy in QC.
  17. The Original Lumpy Gritz
    Don't worry about the lever spring. The sear springs kinda help in opening. The hammer springs is the most important. Along with working the hammer cocking rods over.
  18. The Original Lumpy Gritz
    Use a compression die. Increase powder charge to increase compression.
  19. The Original Lumpy Gritz
    Coyote Cap tuned my '87 to run brass. The clink sound when they hit the ground sounds so cool.
  20. The Original Lumpy Gritz
    Just saw that
  21. The Original Lumpy Gritz
    Up the compression. I compress Old E about .350.
  22. The Original Lumpy Gritz
    There are tools to stretch(swage)the front of the cylinder. Look at Brownells.
  23. The Original Lumpy Gritz
    Strange, I have never had any FTF with their primers. Are you using light weight hammer springs?
  24. The Original Lumpy Gritz
    Not a good choice for SASS level loads. Research BEFORE you buy.
  25. The Original Lumpy Gritz
    Private party can not ship powder or primers. Takes a permit from BATFE to do so.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept