Perro Del Diablo Posted January 15 Posted January 15 Just replaced factory springs in my 41 mag. Of course after using pure brute stupid force I was able to get new mainspring in pall. Soon after saw video where a dollar store fork used to to assist in compressing the new one. Fore head slap moment occured.
Cheyenne Ranger, 48747L Posted January 15 Posted January 15 knowledge is power no matter how you attain it. I, too, learned this trick after the fact
Pat Riot Posted January 15 Posted January 15 I have done that too. I made this tube with slots cut into it for compressing the spring with the mainspring seat and getting both parts far enough compressed to insert a 1/16” punch in the hammer strut to hold everything together. EDIT: I came up with this tube after bouncing a hammer spring off my forehead one day. It saved me explaining the stupid looking bruise…again…and many times since.
Pat Riot Posted January 15 Posted January 15 A little more info. TUBE DIMENSIONS: Length - ~4” Ext. diameter - .310” or 5/16” Interior dia. - .244” or ~1/4” Slot length - 1.75” Slot width - 3/32” or ~ .075” 3/8” Flats cut into sides of tube to accommodate the mainspring seat. End view
Marshal Mo Hare, SASS #45984 Posted January 15 Posted January 15 You are not the first. You won’t be the last. Now did you have to look under the sofa to find it?
Eyesa Horg Posted January 15 Posted January 15 Yup, on the forehead slap! Before I learned of the fork trick years ago, I used use the small needle nose vise grips with jaws just somewhat open when the pliers were closed.
Pat Riot Posted January 15 Posted January 15 13 minutes ago, Eyesa Horg said: I used use the small needle nose vise grips with jaws just somewhat open when the pliers were closed. That’s how I got the bruise on my forehead.
Eyesa Horg Posted January 15 Posted January 15 2 minutes ago, Pat Riot said: That’s how I got the bruise on my forehead. Ouch, bet that made your eyes water! Did you learn any new words or languages? At least lived up to the sailor language I'll bet!
Shawnee Hills Posted January 15 Posted January 15 You guys are making this too hard. Clamp your mainspring seat in the vise so you can push on it from the side, install mainspring on strut, line up spring and strut to seat slot, push and pin the assembly. Easy peasy.
Perro Del Diablo Posted January 15 Author Posted January 15 1 hour ago, Pat Riot said: A little more info. TUBE DIMENSIONS: Length - ~4” Ext. diameter - .310” or 5/16” Interior dia. - .244” or ~1/4” Slot length - 1.75” Slot width - 3/32” or ~ .075” 3/8” Flats cut into sides of tube to accommodate the mainspring seat. End view I was thinking about making something similar
Perro Del Diablo Posted January 15 Author Posted January 15 50 minutes ago, Marshal Mo Hare, SASS #45984 said: You are not the first. You won’t be the last. Now did you have to look under the sofa to find it? Fortune smiled on me for a change each fell at my feet several times
Perro Del Diablo Posted January 15 Author Posted January 15 4 minutes ago, Shawnee Hills said: You guys are making this too hard. Clamp your mainspring seat in the vise so you can push on it from the side, install mainspring on strut, line up spring and strut to seat slot, push and pin the assembly. Easy peasy. That was my original attempt that I failed miserably
Forty Rod SASS 3935 Posted January 16 Posted January 16 And here I was looking at maps trying to find Blackhawk Springs. Then I read the whole thing and became horribly DEpressed. It' snot nice to mess with old people like that.
Yul Lose Posted January 16 Posted January 16 I cut a slot in a conduit clamp and use a rare earth magnet that keeps the shoe in place should it try to fly off.
Linn Keller, SASS 27332, BOLD 103 Posted January 16 Posted January 16 As usual, more than the OP benefits by such a post! My friends, thank you, I've learned something!
Pat Riot Posted January 16 Posted January 16 17 hours ago, Shawnee Hills said: You guys are making this too hard. Clamp your mainspring seat in the vise so you can push on it from the side, install mainspring on strut, line up spring and strut to seat slot, push and pin the assembly. Easy peasy. We’ll need to see a video.
Pat Riot Posted January 16 Posted January 16 Just a reminder boys and girls: This could be a spring, right?
Perro Del Diablo Posted January 16 Author Posted January 16 20 hours ago, Forty Rod SASS 3935 said: And here I was looking at maps trying to find Blackhawk Springs. Then I read the whole thing and became horribly DEpressed. It' snot nice to mess with old people like that. Too bad can't use evil grin emoji
Perro Del Diablo Posted January 16 Author Posted January 16 7 hours ago, Pat Riot said: We’ll need to see a video. I want see it
Recommended Posts
Archived
This topic is now archived and is closed to further replies.