Chief Rick Posted February 21, 2021 Posted February 21, 2021 Can someone please tell me whether the JR press has the bushing that can be removed to accept 1 1/4"-12 dies, or only 7/8"-14 dies
Widder, SASS #59054 Posted February 21, 2021 Posted February 21, 2021 Chief, My RCBS 'JR', which is very old, DOES NOT accept the bushing. It only accepts the 7/8 x 14. I don't know about the more recent models. Many of the Hornady single stage presses will accept the bushing. ..........Widder
Jackalope Posted February 21, 2021 Posted February 21, 2021 Mine does not have such a bushing...but I've had it over 40 years. Regards, Jackalope
Chief Rick Posted February 21, 2021 Author Posted February 21, 2021 Mine probably doesn't have the removable bushing either as it's an older press as well. Looks like I'll need to order a new single stage when they become available again.
Gray Hare, SASS #20821 Posted February 21, 2021 Posted February 21, 2021 My Jr3 doesn't have the bushing but my rock chucker does.
Chickasaw Bill SASS #70001 Posted February 21, 2021 Posted February 21, 2021 well I have Dads OLD RCBS JR , it uses the 5/8 LYMAN dies , been off the bench for many years , I also have his old Lyman turrent press that uses the same dies CB
The Original Lumpy Gritz Posted February 21, 2021 Posted February 21, 2021 The one I bought in 1967, and still have does not. OLG
Trailrider #896 Posted February 22, 2021 Posted February 22, 2021 On 2/21/2021 at 6:50 AM, Jackalope said: Mine does not have such a bushing...but I've had it over 40 years. Regards, Jackalope +1 Sixty years!
Recommended Posts
Archived
This topic is now archived and is closed to further replies.