Pee Wee #15785 Posted August 2, 2020 Share Posted August 2, 2020 I have a Marlin 94 in .45 Colt made sometime in the 90's that needs work. It is still bone stock but I think it is starting to need some help to keep going. I am NOT interested in a short stroke. Who would be good to work on it? Carrier, one-piece firing pin,, trigger, springs, chamfer the chamber mouth, and anything else needed replaced or fixed. Then a good action job. I am interested in gunsmith names and contact info. What would you Marlin shooters have worked on or replaced. I am 75 so not interested in a short stroke kit anymore, it won't change the sundial timer reading for me. Link to comment Share on other sites More sharing options...
Blackwater 53393 Posted August 2, 2020 Share Posted August 2, 2020 I’m posting these in alphabetical order. Any one of them will be able to provide the services you suggest. Cowboy Carty Slick McClade Widder Link to comment Share on other sites More sharing options...
Goody, SASS #26190 Posted August 2, 2020 Share Posted August 2, 2020 Not to be argumentative but I thought that Slick and Widder had retired from being gun plumbers on Marlins. At any rate I would add Boomstick Jay to the list. https://www.boomstickarms.com/ Link to comment Share on other sites More sharing options...
Church Key, SASS # 33713 Posted August 2, 2020 Share Posted August 2, 2020 I'll add Cody Conagher to the list for consideration. Not cheap, but good: Cowboy Shop Link to comment Share on other sites More sharing options...
Pee Wee #15785 Posted August 2, 2020 Author Share Posted August 2, 2020 I don't expect it to be cheap to bring my Marlin back up to better than new. Parts swap I could do but there is more than just swaping parts to get the gun back 100% right. Link to comment Share on other sites More sharing options...
Widder, SASS #59054 Posted August 2, 2020 Share Posted August 2, 2020 Howdy Pee Wee. I agree with ALL the names listed above and will add 'Longhunter'. If you live close to Billy The Avenger, he is well knowledgable of the 1894 Marlin. If I understand your situation, here is my thoughts: 1. Get yeself a spring kit and 1-piece firing pin from somebody like Longhunter or Slick McClade. There are others whose name elude me at this time. OR..... send your rifle to one of those listed above, requesting new springs, firing pin, etc...... AND to check your 'timing' on the lifter ramp. If it were my rifle, I would either send the carrier to Gunner Gatlin for his carrier ramp mod OR have a good TIG welder build up your timing ramp about .005+ to help get your timing back closer to original because its my guess that ramp has worn down just a tad from the previous years. LOTS of things can be done to a Marlin to enhance it, but the necessary stuff has been listed unless something has broken. Personally, I'm basically retired from working on Marlins, atleast until I find out from my doctor what they opt to do with some heart work I need. If you got any specific questions that I might be able to steer you in the right direction, feel free to call me at: 865 / 696-1996. On a side note, there are many folks in SASS that know how to help revive an aging Marlin. ..........Widder Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted August 2, 2020 Share Posted August 2, 2020 OP, what are the issues you are seeing? Have you ck'd ALL screws for tightness? OLG Link to comment Share on other sites More sharing options...
Pee Wee #15785 Posted August 3, 2020 Author Share Posted August 3, 2020 I bought the gun in the 90's, has gone through 3 kids, son-in-law and me so it has some wear. The number of rounds is somewhere way pst 10,000 so I would say the Marlin Jam is just around the corner and should be a lot of wear over er all on contact points. It is not tight anymore and not as smooth. It is little things and just don't feel right. It is clean as I take it down to small parts and put back using blue loctate (sp) so screws don't back out. Widder thank you, will give Longhunter a call this week and see if he will work on it. Hope all works out with your heart, I have had 2 heart attacks 20 years ago. You just learn your limitations and don't push. It is the hardest thing you ever have to learn. Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted August 3, 2020 Share Posted August 3, 2020 Pee Wee, what's the first two numbers of the serial number? OLG Link to comment Share on other sites More sharing options...
Pee Wee #15785 Posted August 3, 2020 Author Share Posted August 3, 2020 serial number: 0302XXXX. It shows use but still drops deer from the front porch swing. It is a 1894 COWBOY LIMITED, *****MODEL 1894CB-CAL.45 COLT***** Link to comment Share on other sites More sharing options...
Edward R S Canby, SASS#59971 Posted August 3, 2020 Share Posted August 3, 2020 If your Marlin has a plastic magazine tube follower I would replace it with a more durable follower. Long Hunters worked on three Marlins for me. I was pleased with the work. Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted August 3, 2020 Share Posted August 3, 2020 1997 build. X2 on getting a metal follower. OLG Link to comment Share on other sites More sharing options...
Pee Wee #15785 Posted August 3, 2020 Author Share Posted August 3, 2020 Has the metal follower. My brother turned one for me not long after buying the gun Link to comment Share on other sites More sharing options...
Cheyenne Ranger, 48747L Posted August 3, 2020 Share Posted August 3, 2020 blue loctite or not be sure to get a bunch of replacement screws for it. I have at least 2 of each kind/size for mine. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.