Jump to content
SASS Wire Forum

Stainless steel.


Dorado

Recommended Posts

So I'm in need of a strip of stainless steel. I need 3/16" or there abouts, 1x10" flat bar. Any good suppliers that you'd recommend or anyone just happen to have a strip like that laying about? Must be stainless steel, making something for my boat that'll be welded onto a stainless bar.

Link to comment
Share on other sites

McMaster-Carr

Scroll down to find size.

https://www.mcmaster.com/316-stainless-steel

 

OR look up this part number on McMaster-Carr’s website. 3/16”x1” in various lengths by the foot.  Part #9083K35

Link to comment
Share on other sites

We have a company "Metal Supermarket" in Nashville that sells by the pound and in any size you want, if it is manufactured that way. You dont have to buy a 20 foot piece, just a little more by the pound. Also there is no cut charge if you want lots of little pieces. It is a franchise , there may be one near you.

 

Imis

Link to comment
Share on other sites

Getting to talk to the local supplier is a pain. I'm at work before and after their hours and they're on the opposite side of town so there's no rushing down to pick it up during lunch....I'll try to order some. I figured 316 would be best. Just need to order it in.

Link to comment
Share on other sites

Heard back from a machine shop that's done some good work for me in the past. He'll order the metal, cut it out to my specs and will weld it on for $35. Gonna take him up on his offer as that's a lot better that what I was going to do.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.