Looking for 45colt load for Tite Group powder asking for a friend Thanks for all the replies I think we got him going good

[WOODFOX , sass#34179]

title says it all I'm asking for a friend

 Please help Thanks

 Woodfox

[The Rainmaker, SASS #11631]

What weight bullet?

I use 5.4 for a 200 gr

[Abilene, SASS # 27489]

Before I switched to Clays for 45 Colt, I loaded a lot of 5.5gr Titegroup (Hodgdon's minimum at the time) with a 200gr bullet, they were fine.  This was also the minimum in the LaserCast manual.  Now Hodgdon has increased that minimum up to 6.5gr, I have no idea why.  That is way too hot for CAS (933fps).

[WOODFOX , sass#34179]

15 minutes ago, The Rainmaker, SASS #11631 said:

What weight bullet?

I use 5.4 for a 200 gr

200 gr.and thanks for the response

[WOODFOX , sass#34179]

8 minutes ago, Abilene, SASS # 27489 said:

Before I switched to Clays for 45 Colt, I loaded a lot of 5.5gr Titegroup (Hodgdon's minimum at the time) with a 200gr bullet, they were fine.  This was also the minimum in the LaserCast manual.  Now Hodgdon has increased that minimum up to 6.5gr, I have no idea why.  That is way too hot for CAS (933fps).

he's using their data and I said way to hot that's why I'm asking thanks

[Capt Stephen D Hill, SASS #56151]

160gr with 6.0

[Sixgun Seamus]

I was using 5.5 gr behind 200 gr. Another cowboy friend was using 4.7 gr/200 gr bullet. I switched to 4.7 almost 2 yrs ago with no problems.

[Ranger Dan]

I use 4.5 gr and 200 gr bullets. Same for 44-40 180-200 gr bullets.

[Wild Eagle]

I use 5.0 grains of TiteGroup behind a 200 grain bullet.  5.0 grains also works with Bullseye and Red Dot.

[Rye Miles #13621]

I just started loading some .45’s. I’m using  6.0 of HP38 with a 200 gr bullet .
I’m only shooting them from a 24” 73 no pistols