Trigger Mike Posted December 18, 2018 Share Posted December 18, 2018 I like to put things on here as a sounding board and get input and advice . In my travels on gun broker I ran into a glock 9mm with a 22 conversion. the seller wanted way too much for it but it got me to thinking about an idea. My youngest son is a glock fan through and through. Anytime I open the safe he reaches for the glock 19 and checks to make sure it is empty and handles it. He likes shooting it. There are 2 different brands of 22 conversions that I have found out there. A gen 3 receiver can be had for 160 and a 22 conversion from 250 to 340 so I had the idea of mating the two together and giving him a glock 22 caliber for Christmas . right now he likes to use my Sig 1911-22 or my Browning 1911-22 but he prefers the glock 9mm. Is the glock 22 conversion kits any good? which brand is better? Is there a cheaper way to do what I am thinking? My other thought was to save the 160 got the frame and just give him mine and put the 22 conversion on it and not give him the 9mm part until much later. Link to comment Share on other sites More sharing options...
Pat Riot, SASS #13748 Posted December 18, 2018 Share Posted December 18, 2018 Mike, Call these folks and talk to them. They can steer you to a good set up. GlockStore Address: 4770 Ruffner St, San Diego, CA 92111 Hours: Closed ⋅ Opens 9AM Phone: (800) 601-8273 Phone: (800) 601-8273 Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted December 18, 2018 Share Posted December 18, 2018 Call these folks. https://www.glockmeister.com/default.asp OLG Link to comment Share on other sites More sharing options...
Pat Riot, SASS #13748 Posted December 18, 2018 Share Posted December 18, 2018 No...Call my folks....not his folks.... Both places could give you a good review on Glock conversions. Link to comment Share on other sites More sharing options...
Trigger Mike Posted December 18, 2018 Author Share Posted December 18, 2018 the web site even shows they make it for a glock 26. It would make a good pocket gun for me , maybe i need to buy one. Link to comment Share on other sites More sharing options...
Chili Ron Posted December 20, 2018 Share Posted December 20, 2018 Howdy, It sure sounds like a thoughtful idea. Any way to try it before you lay out the bucks? After shootin a lotta other .22s my very favorite is the Browning Buckmark. An older one very nice and smooth. Best CR ps after reading it seems the conversion is very ammo sensitive. Im not sure I want a .22 that wont shoot stingers. That's just me..... Link to comment Share on other sites More sharing options...
Trigger Mike Posted December 20, 2018 Author Share Posted December 20, 2018 Mainly thought he'd like it because he likes glock so much. He used a browning 1911-22 today on a critter we had to help not be sick no more. He likes that 1911 . He may not be lost to plastic yet. Link to comment Share on other sites More sharing options...
Chantry Posted December 20, 2018 Share Posted December 20, 2018 On 12/18/2018 at 10:18 AM, Trigger Mike said: I like to put things on here as a sounding board and get input and advice . In my travels on gun broker I ran into a glock 9mm with a 22 conversion. the seller wanted way too much for it but it got me to thinking about an idea. My youngest son is a glock fan through and through. Anytime I open the safe he reaches for the glock 19 and checks to make sure it is empty and handles it. He likes shooting it. There are 2 different brands of 22 conversions that I have found out there. A gen 3 receiver can be had for 160 and a 22 conversion from 250 to 340 so I had the idea of mating the two together and giving him a glock 22 caliber for Christmas . right now he likes to use my Sig 1911-22 or my Browning 1911-22 but he prefers the glock 9mm. Is the glock 22 conversion kits any good? which brand is better? Is there a cheaper way to do what I am thinking? My other thought was to save the 160 got the frame and just give him mine and put the 22 conversion on it and not give him the 9mm part until much later. I'll note and this applies to all conversions, regardless of gun make or model, can be somewhat ammo sensitive and most people I've seen using .22 conversions use CCI Mini Mags. Link to comment Share on other sites More sharing options...
J. Mark Flint #31954 LIFE Posted December 21, 2018 Share Posted December 21, 2018 get a Ruger Mark III or IV, relatively cheap, accurate and reliable. Conversions aren't worth the effort and are a good way to scratch and wear out a good gun...or a glock Link to comment Share on other sites More sharing options...
G W Wade Posted December 22, 2018 Share Posted December 22, 2018 I picked up the Sig 1911-22. Pretty happy with it, but like every 1911 I own, I can't leave it alone. Constantly changing something. Removed the mag safety before I even fired it, does not belong on 1911. Functions well even if you don't change anything GW Link to comment Share on other sites More sharing options...
Chili Ron Posted December 22, 2018 Share Posted December 22, 2018 Howdy, Mag safety. Would be a great idea if ALL worked that way. But do they? Best CR Link to comment Share on other sites More sharing options...
Trigger Mike Posted December 22, 2018 Author Share Posted December 22, 2018 As tempting as it is I get the point that the conversion kits are not always a good idea. I also this week saw his brother not being grateful for what he got for his birthday and already wanting to trade his ATV for something else so I need to teach them to make do with what they have better than I do. The younger one already likes the ones I have and when I mentioned there is a glock version he didn't seem to be real interested. Link to comment Share on other sites More sharing options...
Trigger Mike Posted December 22, 2018 Author Share Posted December 22, 2018 I wonder if I just want to get them things I like and relive my childhood through them. None of these things were an option for me growing up. Link to comment Share on other sites More sharing options...
Chili Ron Posted December 22, 2018 Share Posted December 22, 2018 Howdy, Why does a Cobra go for millions? People want what they didn't have in high school and now have too much money. So they buy what they couldn't have years ago and cost is no object. One of those car rebuilding shows I just wanted to slap the guy. He took an old Tbird and rebuilt it with all non ford parts. And he was a big guy and hardly fit into the car. My aren't we getting deep? Best CR Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.