Red Cent Posted November 27, 2012 Posted November 27, 2012 i need a favor, please. Would someone measure the approximate distance from the tip of the barrel to the balance point on a typical single shot like a Sharps. I am making some soft gun cases and I want this to position the handle. Thanks.
The Original Lumpy Gritz Posted November 27, 2012 Posted November 27, 2012 Balance point changes with barrel length and bbl. weight, BTDT LG
Red Cent Posted November 27, 2012 Author Posted November 27, 2012 Then assume it is a Sharps Quigley down Under. Or a Pedersoli 1874 Sharps. Most have a 28" or 30" barrel.
Cliff Hanger #3720LR Posted November 27, 2012 Posted November 27, 2012 "Then assume it is a Sharps Quigley down Under. Or a Pedersoli 1874 Sharps. Most have a 28" or 30" barrel." ------------------- Quigley Sharps has a 34" barrel. Sharps Sporting rifle has 32" barrel. If you plan to make cases for others, you will need a list of various models to take in barrel weight. Round, tapered octagon and straight octagon. (Bull barrel) If you look at other cases you will find that the handle strap is long to allow you to shift your hand in the loop to counter the balance differences in barrels and stocks. If you are planning to make cases for others, I would be interested in seeing what you offer. CH
Red Cent Posted November 27, 2012 Author Posted November 27, 2012 You guys are making this difficult. Assume a 30" barrel.
The Original Lumpy Gritz Posted November 27, 2012 Posted November 27, 2012 You guys are making this difficult. Assume a 30" barrel. With or without scope? LG
The Original Lumpy Gritz Posted November 27, 2012 Posted November 27, 2012 My Shiloh's balance mostly mid-forearm, depending on bbl length. http://www.shilohrifle.com/shop/home.php?cat=1 LG
Griff Posted November 28, 2012 Posted November 28, 2012 My Shiloh's balance mostly mid-forearm, depending on bbl length.http://www.shilohrif.../home.php?cat=1 LG +1
Cliff Hanger #3720LR Posted November 28, 2012 Posted November 28, 2012 Tell ya what I'll do. Tomorrow I will get in the safe and measure my Pedersoli 32" tapered barrel Sporting rifle and include the balance point. I'll post the numbers here for you to start your note with.
Sixgun Seamus Posted November 28, 2012 Posted November 28, 2012 I have a Pedersoli Heavy Match Target Sharps with a 34 inch barrel. It balances right at the forearm screw. That is 26½ inches from the barrel end and 24½ inches from the center of the butt plate . Hope this helps.
Jabez Cowboy,SASS # 50129 Posted November 30, 2012 Posted November 30, 2012 In my hand ........ Jabez Cowboy
Long Branch Louie Posted November 30, 2012 Posted November 30, 2012 Red, mine has a 26" barrel. I'll check the balance point when I get home.
Charlie Harley, #14153 Posted November 30, 2012 Posted November 30, 2012 4-6" in front of the receiver is where my two Sharps balance. One is a 34" heavy barrel. One is a 30" standard weight. That should get you in the ballpark.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.