Flattop "Lucky" Leslie 5 Posted May 18 What might you have? Thanks! Share this post Link to post Share on other sites
Nimble Fingers SASS# 25439 170 Posted May 18 Are u talking about the wood stocks that go over the grip? If yes I will send pictures when I get home. Share this post Link to post Share on other sites
Flattop "Lucky" Leslie 5 Posted May 18 Yes I am! Thanks! Share this post Link to post Share on other sites
Nimble Fingers SASS# 25439 170 Posted May 19 Got home late and couldn’t find it where I thought I left it. Give me another day? Or if someone beats me to it not a problem. Share this post Link to post Share on other sites
Wild Willi 43 Posted May 19 This what you have in mind, I do not think the gun has been fired, Uberti wax on the stock was not rubbed off before the pic Share this post Link to post Share on other sites
Flattop "Lucky" Leslie 5 Posted May 19 Thats what I am looking for but for a 3rd model dragoon!! Thanks! Share this post Link to post Share on other sites
grey ghost 33 Posted May 19 Took me many years to find one and alotbof time to make it fit well. Ive heard of people having great luck but talked to many people about poor fitment. If you find one buy it Share this post Link to post Share on other sites
Flattop "Lucky" Leslie 5 Posted May 20 Have one for a 51 that fit right out of the gate!! Another I thought was for a 51 drove me crazy! Found out it was for a 58 Remington! Share this post Link to post Share on other sites
grey ghost 33 Posted May 20 Mine was for a dragoon, had 1 for a navy and it needed 2 passes with a file literally Share this post Link to post Share on other sites
Rooster Ron Wayne 1,449 Posted May 20 I have had three or four of them for different guns over the years. As kool as they look . You will find No Use for it . So saith the Rooster Share this post Link to post Share on other sites
SGT. QUINCANNON, SASS #32999 32 Posted May 21 I have an Uberti-made stock that fits my Colt Signature model like a glove. Hope you find one. Share this post Link to post Share on other sites
Rooster Ron Wayne 1,449 Posted May 23 On 5/20/2020 at 11:15 PM, SGT. QUINCANNON, SASS #32999 said: I have an Uberti-made stock that fits my Colt Signature model like a glove. Hope you find one. That's because your Colt Signature Model was made by Uberti. Just Sayin Rooster Share this post Link to post Share on other sites
Wolfgang, SASS #53480 288 Posted May 23 I have one for a '58 Remington . . and COOL is right! Have I ever shot live loads with it on ? I can't remember ( but then I don't remember much of anything any more) . . . I do shoot blanks with it in my BUFFALO BILL CODY shooting act. And it is COOL for the audience when I pull it from under my coat and put it on the pistol. Wolfgang Share this post Link to post Share on other sites
