Jump to content
SASS Wire Forum

C. W. Knight # 47289L

Members
 View Profile  See their activity

  • Posts

    770

  • Joined

  • Last visited

 Content Type 

Everything posted by C. W. Knight # 47289L

  1. C. W. Knight # 47289L
    PM sent. C.W.
  2. C. W. Knight # 47289L
    Thanks Rambler. I believe that is part of the problem. I noticed when I got a chance to test fire a few that turning th cyl was very tight. Unloading one of the guns I had to pull the cyl pin and take the cyl out because it would not turn. So the Sch rds are just a no go. I will next try a few different batches of my colt loads. I shoot mostly .38's so this may just be a winter project. A huge thanks to all who offered advice. C-U on the firing line sometime. C.W.
  3. C. W. Knight # 47289L

    McC, did you find the carrier that you were looking for?  If you are still looking, I have one that might fit the bill.  I bought it to maybe replace one that had a small hole from a casting flaw in an original Longhunter rifle.  Never was problem for me, but I sold the rifle to a rookie buyer and he cried about it being more used than my description and photos showed.  I gave him his money back minus my shipping & ffl cost, and sold the rifle to a very knowledgeable SASS shooter the day after I received back.  The new one I bought I sent to Sgt. Eli for lighting.  He found a casting flaw in it also but filled the small gap with JB Weld and finished it with final machining.  If you are interested PM me a cell phone # and I can provide a couple of photos.  The price will be $100.00 shipped me to you.  C.W. Knight, 47289L  :FlagAm:

  4. C. W. Knight # 47289L
    No reason at all HT, That is a very valid suggestion, especially since I believe that I will have to re-adjust both sets if I want to use the current ammo, But with my rifle not having any issues and for NMV I only wish to use the Schofield rds. Also as a added benefit, this is a no cost option. Sometimes it is very easy for someone that may be too close to the problem and to overlook the oblivious. Thank you HT for sharing, and I hope you have just a wonderful Cowboy Day. C.W
  5. C. W. Knight # 47289L
    Thanks Choctaw J. I bought a set of like new SASS .45,s It is looking more like my reloads. C.W.
  6. C. W. Knight # 47289L
    Thank you Burt, I have a box of remanufactured .45 colt, and yes they drop right in the cylinder. I do not own a proper gauge for .45 colt. I have always used the revolver cylinder to check fit. Never mic-ed one. Started w/.45's, all Rugers. Still today no problem w/ .45 rifle, same ammo. The problem came with SASS pair NMV .45. Started w/ Scofield for less powder and also started lighter bullets. I do use a Dillon 550. As soon as I finish catching up with my .38's loading. I am going to swap Calibers and try to reset the sizing die, on both my Sch set & .45C set. And yes on the .452". Bullets. Thanks again, I do really appreciate the response and advise. I thought if someone had a F.L. Sizer I would put it on my single stage press and test my/your theory of just poor Die set-up C. W.
  7. C. W. Knight # 47289L
    Thank you LG for the recommendation, I am trying to remove/resize some of my older reloads that are not quite acceptable to my NMV's. I also have some 500+ Schofield rounds along with .45 colt with the same issue. The resizing has worked in my older Vaquero's but not the NMV ones. Appears to be too tight the last 1/16" at the bottom of the case is just too large, Some bind or are tighter to spin or turn a loaded cylinder. Will always listen to other suggestions/advise. C. W.
  8. C. W. Knight # 47289L
    Ad says it all, I need to resize some of my reload .45 cal rounds. Anybody got one they don't need. Thanks, C.W.
  9. C. W. Knight # 47289L
    Received my hatband very quickly. Just can't decide on which hat to put it on. Maybe the new one. Thanks , C.W.
  10. C. W. Knight # 47289L
    C Reb, I would like to take those off your hands. Please PM me with $$ information and where to send it. Thanks C.W.
  11. C. W. Knight # 47289L
    I'll take it. Please send me the payment info. PM is fine. Personal check O.K. ?
  12. C. W. Knight # 47289L
    CHolla, please put me on the list for a hatban. C.W Knight #47289 L. Thanks
  13. C. W. Knight # 47289L
    John, can you post a photo of what you are looking for? I believe that I have a couple. C.W.
  14. C. W. Knight # 47289L
    Chrony Sold Pending Funds Thanks, C.W.
  15. C. W. Knight # 47289L
    Spaniard, I have a new in the box Chrony. The box has "ALPHA" marked on end. lLet know if you are interested. I can send phone pictures. $85.00 shipped! C-U, C.W.
  16. C. W. Knight # 47289L
    PM sent, C.W
  17. C. W. Knight # 47289L
    My Congrats also!! Most recently at the TN State banquet. Ate with Seamus & his lovely bride where they also won the Best Dressed Couple at the Banquet!! Well Done, pard C-U, C.W.
  18. C. W. Knight # 47289L
    Mezcal Charlie, if you decide that a Browning is the way you wish to go I have a Browning Citori Trap, that I have only used once in the last 16+ years. It has 30" ported bbls, screw in chokes that are flush with the bbls. The only modification that I made was I sent the butt stock off and had a professional installed adjustible, cheek piece. Phone photos available. And original box and paperwork. C. W. Knight , 47289L. Under $2.K shipped & delivered my ffl to yours. C-U, C.W.
  19. C. W. Knight # 47289L
    Scissors, Sent you a PM.
  20. C. W. Knight # 47289L

    TacoBill, send me your address, I believe that I have one.  C.W.  :FlagAm:

    1. Show previous comments  1 more
    2. C. W. Knight # 47289L

      C. W. Knight # 47289L

      Should be in tomorrows mail.  C-U, C.W.

    3. tacobill

      tacobill

      Thanks C W the clip came today. Just what I need.

      Taco

    4. C. W. Knight # 47289L

      C. W. Knight # 47289L

      :D 

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept