Larsen E. Pettifogger, SASS #32933 Posted February 8, 2023 Share Posted February 8, 2023 Thursday night is swap meet night at EOT. This year I have decided not to try and haul a bunch of stuff to the swap meet. So I am posting here. If anyone wants an item or has more questions you can PM me. If something is sold I will arrange to meet at EOT. I will also be at the swap meet wandering around and can bring items in my car. I just won’t have a table. I do not take Zelle, Venmo, BitCoin or any of that stuff. Just American money. 1. Pair Hickok Open Tops. Arbors adjusted, tuned, hammer spurs re-contoured just a bit. White handled tool I made to knock out empties. It is sized to fit into a .38 belt loop. $800.00 SOLD 2. Pair Uberti Mason Conversions. Arbors adjusted, coil spring hand conversion, hammer over travel stops, hammers re-contoured, ejectors rebuilt (brass bushings and smaller ejector rods) to work properly with .38 cartridges. $800.00 SOLD 3. IAC SxS Outside Hammer Shotgun. Model 1887/99. Locks have coil mainsprings that have been replaced with lighter ones. Original springs included. $325.00 SOLD 4. AWA .44-40 Lightning. 20” Carbine. $750.00 SOLD 5. Uberti Lightning .45 Colt. 26” barrel Carbine! (Note Uberti’s have no slide lock. Some people have a hard time not constantly pulling back on the pump slide.) $750.00 6. Marlin 1895 .45-70 Collector Grade. First year production Marlin 1895 with two digit serial number. First year production had no cross bolt safety, Ballard rifling and a very mild crescent butt plate. Original hang tag still attached to lever. $1,500.00 Link to comment Share on other sites More sharing options...
Jedediah Westwood Posted February 8, 2023 Share Posted February 8, 2023 If I cant find a model 87 lever shot gun then I will take the sxs with external hammers. Link to comment Share on other sites More sharing options...
Preacherman Posted February 8, 2023 Share Posted February 8, 2023 PM sent on AWA LIghtning in 44-40. First dibs, thanks, Preacherman Link to comment Share on other sites More sharing options...
Prairie Dawg, SASS #50329 Posted February 8, 2023 Share Posted February 8, 2023 Good Afternoon Larsen: If you decide to ship, I'd like to buy the Hickock & Richard Mason Conversions. Pair Hickok Open Tops. Arbors adjusted, tuned, hammer spurs re-contoured just a bit. White handled tool I made to knock out empties. It is sized to fit into a .38 belt loop. $800.00 Pair Uberti Mason Conversions. Arbors adjusted, coil spring hand conversion, hammer over travel stops, hammers re-contoured, ejectors rebuilt (brass bushings and smaller ejector rods) to work properly with .38 cartridges. $800.00 Link to comment Share on other sites More sharing options...
Larsen E. Pettifogger, SASS #32933 Posted February 8, 2023 Author Share Posted February 8, 2023 Preacherman. Got your PM. I'll mark it sold. Link to comment Share on other sites More sharing options...
Hugh Long Posted February 8, 2023 Share Posted February 8, 2023 Pm on uberti lightning Link to comment Share on other sites More sharing options...
Happy Appy Posted February 8, 2023 Share Posted February 8, 2023 PM sent Uberti Mason and shot gun Link to comment Share on other sites More sharing options...
Slowpoke Joe Posted February 8, 2023 Share Posted February 8, 2023 If you'll ship to 33771, I'll take it and pay the shipping. Link to comment Share on other sites More sharing options...
Larsen E. Pettifogger, SASS #32933 Posted February 8, 2023 Author Share Posted February 8, 2023 These are for delivery/pickup at EOT. I do not plan on doing any shipping. Link to comment Share on other sites More sharing options...
LawMan Mark, SASS #57095L Posted February 9, 2023 Share Posted February 9, 2023 6 hours ago, Larsen E. Pettifogger, SASS #32933 said: Thursday night is swap meet night at EOT. This year I have decided not to try and haul a bunch of stuff to the swap meet. So I am posting here. If anyone wants an item or has more questions you can PM me. If something is sold I will arrange to meet at EOT. I will also be at the swap meet wandering around and can bring items in my car. I just won’t have a table. I do not take Zelle, Venmo, BitCoin or any of that stuff. Just American money. 1. Pair Hickok Open Tops. Arbors adjusted, tuned, hammer spurs re-contoured just a bit. White handled tool I made to knock out empties. It is sized to fit into a .38 belt loop. $800.00 2. Pair Uberti Mason Conversions. Arbors adjusted, coil spring hand conversion, hammer over travel stops, hammers re-contoured, ejectors rebuilt (brass bushings and smaller ejector rods) to work properly with .38 cartridges. $800.00 3. IAC SxS Outside Hammer Shotgun. Model 1887/99. Locks have coil mainsprings that have been replaced with lighter ones. Original springs included. $325.00 4. AWA .44-40 Lightning. 20” Carbine. $750.00 SOLD 5. Uberti Lightning .45 Colt. 26” barrel Carbine! (Note Uberti’s have no slide lock. Some people have a hard time not constantly pulling back on the pump slide.) $750.00 6. Marlin 1895 .45-70 Collector Grade. First year production Marlin 1895 with two digit serial number. First year production had no cross bolt safety, Ballard rifling and a very mild crescent butt plate. Original hang tag still attached to lever. $1,500.00 That's the lowest B0 serial number I've seen on a 1895 Marlin. The B0 series were made in 1972. I have one with the B0 serial number, no where near as nice as this one. Link to comment Share on other sites More sharing options...
Prairie Dawg, SASS #50329 Posted February 9, 2023 Share Posted February 9, 2023 Hi Larsen: Just sent you a proposal regarding the Uberti OTs & R-Ms Check yer messages. Thanks --Dawg Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.