No Show Joe 1 Posted May 21 How many rnds in an 18” barrel magazine on an 1873 Uberti? Quote Share this post Link to post Share on other sites
Jackrabbit Joe #414 245 Posted May 21 Get eleven .38's in the three we have. 1 Quote Share this post Link to post Share on other sites
Abilene, SASS # 27489 392 Posted May 21 No Show, it should hold ten .357's and at least that many .38's depending on length. I'm wondering how you posted but still show zero posts. Quote Share this post Link to post Share on other sites
Marshal Hangtree 773 Posted May 21 4 minutes ago, Abilene, SASS # 27489 said: . . . . I'm wondering how you posted but still show zero posts. He's a no-show. 1 Quote Share this post Link to post Share on other sites
Phantom, SASS #54973 3,136 Posted May 21 Funny, folks are assuming 38/357. 1 Quote Share this post Link to post Share on other sites
Three Foot Johnson 1,314 Posted May 21 Both the .357 and .45 versions are listed as 10+1 on Uberti's Website. It doesn't show the .44 mag or .44-40 as currently available with an 18" barrel. Forty five Colt, .357 mag, .38-40, and .44-40 are all within .020" in case length, and .38 spl & .44 spl are only .005" different. Overall lengths are listed as 1.59" for .357 and 1.60" for .45 Colt, so only .010" difference, or a tenth of an inch in a magazine of ten. Quote Share this post Link to post Share on other sites
Phantom, SASS #54973 3,136 Posted May 21 3 minutes ago, J Bar Binks, #47015 said: Both the .357 and .45 versions are listed as 10+1 on Uberti's Website. It doesn't show the .44 mag or .44-40 as currently available with an 18" barrel. Forty five Colt, .357 mag, .38-40, and .44-40 are all within .020" in case length, and .38 spl & .44 spl are only .005" different. Overall lengths are listed as 1.59" for .357 and 1.60" for .45 Colt, so only .010" difference, or a tenth of an inch in a magazine of ten. Right... So what's it chambered in and what is he going to be shooting? 38, 357, 45... It kind of matters if he wants to know stock capacity. Quote Share this post Link to post Share on other sites
Three Foot Johnson 1,314 Posted May 21 Stock capacity of the 18" .357 and .45 Colt 1873's are both listed as 10+1 on Uberti's Website. Since the '73 isn't chambered in .38 spl, there is no stock capacity for that cartridge listed, but the 19" 1866 .38 spl is also listed as 10+1. I suppose the capacity of a given rifle could possibly be 11+1 with a shorter bullet or modified spring and/or end cap. Quote Share this post Link to post Share on other sites
Equanimous Phil 28 Posted May 22 (edited) The numbers on Uberti's site are too low. While both my .45 rifles are listed 10+1 the 19" carbine holds 11+1 and the 20" short rifle holds 12+1 also 11+1* using stock springs and factory ammo Magtech Cowboy Action Loads 250gr (haven't measured OAL yet). *The rifle holds 12+1 with my A-ZOOM snap caps which are a tad shorter than the Magtech ammo Edited July 22 by Equanimous Phil Both rifles 11+1 with factory Magtech ammo 1 Quote Share this post Link to post Share on other sites
