Jump to content
SASS Wire Forum

H&R Buffalo Classic - Custom Target Rifle /SOLD PF


Recommended Posts

I bought me a new Rolling Block rifle ,

SO This one needs a new home .

SOLD PF

Thank you Wild Willi

 

FOR SALE: H&R 1871 Target Rifle; Break Open Single-shot, .45/70


Blued Barrel

 

American Walnut checkered Stock.

 

Color-case-hardened Receiver

 

Crescent Butt plate with Leather stock cover . (60.00 cover )

 

I cut off the Ugly plastic Trigger Gard

And Inlayed a Brass Hawkins Trigger Gard . (Looks sweet.)

 

Williams adjustable rear peep sight . (80.00 Sight )

And the stock Williams sight .

With the Original Rifle Box and paper work.

 

Lyman target front sights,
with eight aperture inserts.

 

Transfer Bar Safety .

 

Like new with Original Box .

 

Has only had about 30 round put threw it. ( all 405gr Lead )


$400 Plus Shipping UPS , upon receipt of USPS Money Order and copy of FFL.

 

I will Take a personal check , But will hold till check clears .

 

FFL must be willing to receive from private shipper.


Kalifornia shipping my cost more do too rules from FFL.


First “I”LL TAKE IT” posted here

 

http://i1103.photobucket.com/albums/g476/rfugerron67/20131021_204306_zps351a7d11.jpg

 

http://i1103.photobucket.com/albums/g476/rfugerron67/20131021_204242_zps99d3b1aa.jpg

 

http://i1103.photobucket.com/albums/g476/rfugerron67/20131021_204219_zps478fd70e.jpg

 

http://i1103.photobucket.com/albums/g476/rfugerron67/20131021_204204_zps127c50cb.jpg

 

http://i1103.photobucket.com/albums/g476/rfugerron67/20131021_204132_zps747e2846.jpg

 

http://i1103.photobucket.com/albums/g476/rfugerron67/20131021_204123_zps3ba39bf0.jpg

 

http://i1103.photobucket.com/albums/g476/rfugerron67/20131021_204107_zps3754d38b.jpg

 

http://i1103.photobucket.com/albums/g476/rfugerron67/20131021_204041_zps146f115f.jpg

Link to comment
Share on other sites

"I cut off the Ugly plastic Trigger Guard


And Inlayed a Brass Hawkins Trigger Guard . (Looks sweet.)"


Link to comment
Share on other sites

New lower Price :)

 

400 plus shipping

Link to comment
Share on other sites

BTT

Link to comment
Share on other sites

I have been using it at our local shoots.

There are several other shooters using the same setup.

Link to comment
Share on other sites

If you look at Rifle Sights on page 8 of the SASS handbook you will see two reasons the sight on this rifle may not be allowed in SASS side matches.

 

1. Peep sights must be tang mounted. (This one is barrel mounted.)

 

2. Barrel and receiver mounted click adjustable sights are not allowed. (This sight appears to be such a sight,)

 

But this sight could be removed and a SASS legal sight installed. The installed sight makes this rifle a fine hunting firearm or target rifle other than for SASS side matches.

 

But, as always, local clubs can make exceptions to SASS rules. However State and above matches would normally follow SASS rules.

 

YMMV

Marlin

Link to comment
Share on other sites

Posted · Hidden by Allie Mo, SASS No. 25217, October 24, 2013 - argumentative
Hidden by Allie Mo, SASS No. 25217, October 24, 2013 - argumentative

It would seem someone is upset that I made references to the SASS Shooters Handbook as to the type of sights that are legal on buffalo and long range rifles. Just answered the question Donkey Dude posted on this thread.

 

If this wrinkles somebodies nose, then they could have answered it in a way that would have provided the correct answer to Donkey Dude's question. Again I say, "These are fine rifles, I own 2 myself."

 

Marlin (Who don't like to be threatened.) Buckhorn

Link to comment

Like I have said .

I have used this rifle this way for several shoots.

At more then one local club.

There are several shooters who use the same setup.

 

This is a good starter rifle and at a good price.

 

If the rear sight is not allowed where you shoot at replace the sight.

 

SINGLE ACTION SHOOTING SOCIETY
Shooters Handbook
~
17
~
Copyright © Single Action Shooting Society, Inc 2012
Version 18.1
BASIC RULES FOR THE
LONG RANGE COMPETITIONS
Front barrel sights may vary from simple blades to period hooded wind
gauge designs using.
interchangeable sight inserts and having a spirit level mounted integral with the sight or
sight base.
Rear sights must either be open iron sights mounted on the barrel or original style tang or
stock wrist mounted peep sights.
Long range rear barrel mounted sights of the flip up
ladder type may use a peephole drilled through the sliding sight leaf.
An example of this is the various ladder type sights used on the Springfield trapdoors.
Bolt or receiver mounted sights are not allowed
Link to comment
Share on other sites

I will take it. PM sent

Sold pending funds .

Thank you .

God bless

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.