Jump to content
SASS Wire Forum

10 Gauge shooters !


Caladisi kid

Recommended Posts

 

Ballistic products has these in stock as of now.  Happy shooting!

Cheddite 10ga 3-1/2" (86mm) new primed hull 16mm (bag/50)

 
In Stock!
*Limit 5 bags per customer, per month
 

If cartridge manufacturers do not produce their own hulls, then it is a good chance that they may be using Cheddite hulls. These are reliable straight-wall hulls. They are extremely versatile for almost all load types. They crimp easily, either with a fold or roll. Primed with the reliable CX2000 (known as the Cheddite-209 in the USA).

 

Price: $32.9913910BL.jpg

Link to comment
Share on other sites

58 minutes ago, Colorado Coffinmaker said:

 

OH GOODIE!!  Does this mean Pterodactyls are going to be off the endangered list ??  Need a recipe and a bigger oven. 

Might need a bigger box to catch it first....If you decide to debone it...Let know,I use the bones for soup...Just a bigger pot...

 

Texas Lizard

Link to comment
Share on other sites

On 9/10/2021 at 11:18 PM, Warden Callaway said:

What they don't tell you is that the plastic burns through usually on first firing with black powder.  

Depends.  I used to use Remington STS (green) and could get up to 3 loads out of them. Use all brass now.

Link to comment
Share on other sites

1 hour ago, Big Sage, SASS #49891 Life said:

Depends.  I used to use Remington STS (green) and could get up to 3 loads out of them. Use all brass now.

 

I'm sure the STS have thicker walls, especially in bottom half. 

 

Cheditte hulls are just a thin tube with a separate base wad.  Also steel base.  

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.