Jump to content
SASS Wire Forum

WTB 7/8 shot bushing for Pacific DL-105


southparkslim

Recommended Posts

need 7/8  shot bushing for a obsolete Pacific DL-105 press

I believe #190101  (9 shot)  or  #190118 (field load).........................thanks  S Park

Link to post
Share on other sites

Should be able to use Hornady, RCBS, P/W    BPI sells an adapter bushing that converts to easily found MEC bushings      GW

Link to post
Share on other sites

Sorry adapter is for powder ,not shot    But bushings should still work     GW

Link to post
Share on other sites

I couldn’t find a 7/8 but bought a 3/4 and I used a 1/2” drill bit to enlarge to take 7/8.  I think it was 1/2” anyway 

Link to post
Share on other sites

Just measured my bushings Slim and a three-quarter ounce b be  bushing measures .529. And a 7/8 ounce of number nine shot bushing measures .553. Sorry I don’t have any for sale but I thought I’d give you the measurements. You might also check eBay

Link to post
Share on other sites

Southpark,

 

I have what you need and some stuff you probably can use. The HD bushing is 7/8 oz. I also have shot bushings through 1 3/8 oz. I have a total of 17 different powder bushings as well. I'll ship it all to you for $39.00 via USPS flat rate mail. 

 

428661403_bushing3.thumb.jpg.cd6a7085e0c944d72f117d5c203d0f95.jpg570927699_bushing4.thumb.jpg.543e5dc3f35eab9836a63ea9c9a1e894.jpg

bushing 2.jpg

bushing 1.jpg

Link to post
Share on other sites

Southpark give me a call. I am sure I have an extra one. I also load 7/8 oz. I’m shooting at briggsdale on Saturday. 303-748-6149

Link to post
Share on other sites

Problem solved!

Thanks to all who responded, very helpful info...........................SPark

Link to post
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.