Widder, SASS #59054 Posted August 7, 2020 Share Posted August 7, 2020 When Ruger makes a pistol, is the strength of the steel the same for their .44 magnums, Super Blackhawks and Super Blackhawk Hunter models the same as their .454 Casull and .480 revolvers? ..........Widder Link to comment Share on other sites More sharing options...
Pat Riot Posted August 7, 2020 Share Posted August 7, 2020 That is a very good question. I would assume the answer is “yes”, but only they could truly answer that. Link to comment Share on other sites More sharing options...
Cayuse Jack, SASS #19407 Posted August 7, 2020 Share Posted August 7, 2020 When Ruger first advertised the Suoer Redhawk in 454 didn’t the ads mention the fact that they used a different steel than the 44 magnums? Link to comment Share on other sites More sharing options...
Pat Riot Posted August 7, 2020 Share Posted August 7, 2020 Widder, Here is what I would do. I would review this attachment then call Ruger and ask them what steels they use in each model using their own casting charts as a reference. https://ruger.com/casting/PDF/PineTreeCastings.pdf Link to comment Share on other sites More sharing options...
Trailrider #896 Posted August 7, 2020 Share Posted August 7, 2020 39 minutes ago, Pat Riot, SASS #13748 said: Widder, Here is what I would do. I would review this attachment then call Ruger and ask them what steels they use in each model using their own casting charts as a reference. https://ruger.com/casting/PDF/PineTreeCastings.pdf As a material science/technology engineer I find that data fascinating. I don't know what alloy Ruger uses in its .454 Casull guns. Freedom Arms used 17-4 PH (Precipitation Hardening) alloy for its guns. That stuff is hellferstout! Although they call it "stainless steel", it is a different type of alloy in that family. As far as I know, the single action Rugers are also very strong. When the New Vaquero came out, I was told by someone definitely in the know, that the New gun was very strong also, although they state NOT to load .45LC guns in that model hotter than a Colt's SAA. Having shot the original Freedom Arms gun in .454 (two shots were enough, thank you!), I would not buy one. That has nothing to do with the strength of the guns, but with the low strength of this shooter's wrists. A DA grip sends the recoil straight back, whereas the SA's will roll in the hand. Just be careful not to let the hammer spur hit you in the noggin! Link to comment Share on other sites More sharing options...
bgavin Posted August 7, 2020 Share Posted August 7, 2020 Pre-2005 Rugers were made for 44 magnums... new ones are 44 Special. 1-800-ASK-RUGER (fictitious number) is your friend. I have no love for full house loads, but I have lots of love for mine (all pre-2005) being designed enough to handle them. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.