Buckshot Bear Posted April 6, 2022 Share Posted April 6, 2022 My Dillon XL650 Camming Pin Mod I know they sell these on US eBay but there's currently limited postage still to Oz and the cost is substantial. A few hours machining and came up with this. What's good about it is with I can set it a little more precisely than the sold ones. Made it feel a little more smoother in operation and no more greasing. Link to comment Share on other sites More sharing options...
Nickel City Dude Posted April 6, 2022 Share Posted April 6, 2022 I have had a Dillon 650 for a long time but I have to admit that I do not know what a "camming pin" is. Would you please enlighten me? Link to comment Share on other sites More sharing options...
Patagonia Pete Posted April 6, 2022 Share Posted April 6, 2022 +1 .. Yep ... I bought one of these off EBay a couple of years ago ... and it makes the case feeder so smooth. I found a current link on EBay for one of these ... it explains what it is and how it works. https://www.ebay.com/itm/223061105075?epid=1162119081&hash=item33ef7a59b3:g:RRQAAOSwX~dWktqG Link to comment Share on other sites More sharing options...
Hendo Posted April 6, 2022 Share Posted April 6, 2022 32 minutes ago, Patagonia Pete said: +1 .. Yep ... I bought one of these off EBay a couple of years ago ... and it makes the case feeder so smooth. I found a current link on EBay for one of these ... it explains what it is and how it works. https://www.ebay.com/itm/223061105075?epid=1162119081&hash=item33ef7a59b3:g:RRQAAOSwX~dWktqG I bought one of those along with the shell plate indexing ring roller bearing. I couldn't get them to adjust to where I wanted. Link to comment Share on other sites More sharing options...
Nickel City Dude Posted April 6, 2022 Share Posted April 6, 2022 1 hour ago, Patagonia Pete said: +1 .. Yep ... I bought one of these off EBay a couple of years ago ... and it makes the case feeder so smooth. I found a current link on EBay for one of these ... it explains what it is and how it works. https://www.ebay.com/itm/223061105075?epid=1162119081&hash=item33ef7a59b3:g:RRQAAOSwX~dWktqG PP Thanks for the link. I put one of these on my 650 years ago but I never knew it was called a Camming pin. Well now I know. NCD Link to comment Share on other sites More sharing options...
Patagonia Pete Posted April 6, 2022 Share Posted April 6, 2022 BB calls it that because he is more technical than us ... (has all those neat tools). I went out to the garage and took a picture too ... This thing and the primer stop switch has made the machine so much easier (IMHO) to use (I never get a live primer in the catch cup anymore w/ the primer switch). The factory rod always seemed to be trying to dig a hole in the case feeder (no matter how much grease you used) ... sigh ... Link to comment Share on other sites More sharing options...
Hendo Posted April 6, 2022 Share Posted April 6, 2022 It is nice to be able to shut off the shell and primer feeds. Link to comment Share on other sites More sharing options...
Hells Comin Posted April 6, 2022 Share Posted April 6, 2022 I bought mine at Uniquetek.com Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.