Driftwood Dan SASS #62738L 21 Posted March 7 (edited) I now have the dies and I am set to reload the 45 Schofield. What is a favorite loading for SASS w/ 200 gr LRNFP? , I have TrailBoss, Win 231, Tight Group powders. I thank you in advance. Driftwood Dan Edited March 7 by Driftwood Dan SASS #62738L Quote Share this post Link to post Share on other sites
Joe LaFives #5481 291 Posted March 7 (edited) 3.6 g of Trialboss is good behind a 200g bullet Edited March 7 by Joe LaFives #5481 Quote Share this post Link to post Share on other sites
Boulder Canyon Bob# 32052L 331 Posted March 7 IMR lists 4.0 to 5.0 gr of Trail Boss for a 200 gr bullet. I load 4.2. Quote Share this post Link to post Share on other sites
Driftwood Dan SASS #62738L 21 Posted March 7 Thanks for the replies. I will try both to see which I like. Driftwood Dan Quote Share this post Link to post Share on other sites
Baltimore Ed 55 Posted March 7 (edited) I use the same powder charge of Clay Dot in my 45lc [200-250 gr], 44-40 [210 gr]and 45s&w [160-200 gr] to keep things simple but in the s&w drop the bullet weight to 160 as in the smaller case it’s recoil is too sharp and hurts my knuckles shooting my schofield. To me it’s easier to keep the powder as universal as possible between similar cases and just change the bullet weight. I use the heavier bullets in my rifles. I’m about out of Clay Dot so I’ll have to switch to Clays soon. I’ve got a gifted keg of Bullseye so I might experiment with it this year. Edited March 7 by Baltimore Ed Quote Share this post Link to post Share on other sites
High Spade Mikey Wilson 238 Posted March 7 3.5 Trail Boss for me with a 200 gr bullet Quote Share this post Link to post Share on other sites
