Juiceharp Jen Posted February 6, 2020 Share Posted February 6, 2020 I can’t recall at the moment which barrel is fired by the front trigger and which by the rear. Does anyone know? Thanks. Link to comment Share on other sites More sharing options...
Garrison Joe, SASS #60708 Posted February 6, 2020 Share Posted February 6, 2020 IF still a factor trigger set up, the right barrel is fired by front trigger. Good luck, GJ Link to comment Share on other sites More sharing options...
Major BS Walker Regulator Posted February 6, 2020 Share Posted February 6, 2020 What Mr. Joe said. Link to comment Share on other sites More sharing options...
Hoss Posted February 6, 2020 Share Posted February 6, 2020 Mine are swapped. Makes it easier/faster to get the 2nd shot off. Link to comment Share on other sites More sharing options...
Crisco Posted February 6, 2020 Share Posted February 6, 2020 You can make sure by taking a look at which side each trigger is located on. Link to comment Share on other sites More sharing options...
Juiceharp Jen Posted February 7, 2020 Author Share Posted February 7, 2020 Thanks. So reversing the triggers will switch which barrel is fired by the front trigger? Is that mod easy enough I can do it myself. Link to comment Share on other sites More sharing options...
Garrison Joe, SASS #60708 Posted February 7, 2020 Share Posted February 7, 2020 Yes, reversing triggers fires other barrel first. You probably will never care which barrel fires first, though. Reversing triggers makes it possible for a RIGHT handed shooter to reduce the split times between firing the two barrels. THAT is why folks reverse the triggers. Is it simple? Yes, if you have mechanical aptitude about at the level of changing spark plugs. Good luck, GJ Link to comment Share on other sites More sharing options...
G W Wade Posted February 7, 2020 Share Posted February 7, 2020 While I was waiting my Baikal to arrive, I was making a list of things I wanted to do when it showed up. Reversing the triggers was further down. When I was looking at my new purchase I found the triggers were bent inward from the factory. No right or left just front and back. Works very well I think GW Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.