Deadeye Dillard Posted October 1, 2019 Share Posted October 1, 2019 Well, finally time to sell it. Neither my brother or I see ourselves firing back up for the foreseeable future. If you have bought bullets for cowboy in or around Oklahoma from the early 90's up to about 10 years ago you probably bought them from JP Jones and this is the equipment that did it. We were just to busy to keep it up when our grandpa quit and just have other endeavors now. We would like to try and sell it all together first, if that fails we'll start parting it out. To start, we have 3 Bullet Master casters with about 15 sets of magma molds, various 32s, 38s, 40s, 45s, etc. There is about 140 total molds. An Automatic lubesizer with and array of dies. A small Master Caster set up to run automatically, most the big bore 38-55, 45-70, etc was set up on this machine. Furnace, molds, and cranes we used to mix big batches of lead and hang billets to keep the pots feed easily (about 500lbs of lead in furnace and pots). An assortment of accompanying equipment like sorting trays, tumblers, scales. What's not pictured is another Bullet Caster, If I remember correctly needed something for the pot, but never fixed because we didn't have the room for it. I took the photos this morning and am posting as quick as possible to make myself do it. So I'll be working to get better information like exact mold and sizer counts over the next couple evenings. We're looking at 26,000 obo for all of it. Kinda hard to find used prices on this stuff so I figured 1/2 price of new molds, 1/3 of new equipment cost and kinda throwing in the extra caster and misc. items. We are located about 30 west of Tulsa. Thanks, Dead Eye Dillard Link to comment Share on other sites More sharing options...
Waimea Posted October 1, 2019 Share Posted October 1, 2019 PM sent Link to comment Share on other sites More sharing options...
Deadeye Dillard Posted October 3, 2019 Author Share Posted October 3, 2019 Took inventory on the mold last night. Still have a couple sets to identify but here's what I've found so far. All are 2 cavity Saeco sets of 8 9mm 122gr RNBB SOLD 38 140gr WC 38 158gr RNBB 41 230gr SWC 44 200gr FPSWC 45 255gr SWC Magma sets of 8 38 125gr FP 38 158gr RNFP 44 240gr SWC 44-40 200gr RNFP 45 200gr SWC 45 200gr RNFP 45 230gr RN SOLD 45 250gr RNFP Sill need to identify the sets on the machines. Magma 2 cavity, one of each 32 78gr RN 38 158gr SWC 38-40 180gr RNFP Sold 45 160gr RNFP 38-55 245gr RNFP SOLD 45-70 300gr FP/BB Sold 45-70 350gr FP/BB Sold Saeco 2 cavity, one of each 40 370gr BLK POWDER 45 405gr SP 45 480gr BLK POWDER 45 525gr BLK POWDER RCBS 2 cavity, one each 25 85gr FN 40 300gr SPCSA 40 400gr SP One unknown 2 cavity 457 Round Ball Link to comment Share on other sites More sharing options...
Medicine Creek Johnny Posted October 3, 2019 Share Posted October 3, 2019 Hi Dillard. I maybe interested in the 44-200 RNFP and 45-230 RN mounds. Please email me at roddewig@venturecomm.net Thanks MCJ Link to comment Share on other sites More sharing options...
Deadeye Dillard Posted October 3, 2019 Author Share Posted October 3, 2019 4 hours ago, Medicine Creek Johnny said: Hi Dillard. I maybe interested in the 44-200 RNFP and 45-230 RN mounds. Please email me at roddewig@venturecomm.net Thanks MCJ Thanks for the interest. I'm going to try and give it minute to sell together, or at least a large chunk before parting out. I'll price out each piece when we decide to go that route. Link to comment Share on other sites More sharing options...
Col. Falcon Tuscarora, #29154 Posted October 4, 2019 Share Posted October 4, 2019 Deadeye PM sent. Thanks Link to comment Share on other sites More sharing options...
Deadeye Dillard Posted October 16, 2019 Author Share Posted October 16, 2019 BTT, have received and responded to alot of inquires about parting out. Still holding out to sell the whole lot. Link to comment Share on other sites More sharing options...
Deadeye Dillard Posted November 10, 2019 Author Share Posted November 10, 2019 Let try getting rid of some of this stuff Lube Sizer with dies, collators, etc 3500$ 3 Bullet Master Casters 3500$ each Single mold caster 800$ Molds (listed in above post) 50$ each Furnace with molds and whatever lead is in it 1500$ Link to comment Share on other sites More sharing options...
willie GOODNEWS Posted November 10, 2019 Share Posted November 10, 2019 I’ll take magma 2 cavity 1 set 38-40 180 gr RNFP 45-70 300 gr FP/BB Let me know where to send the money Link to comment Share on other sites More sharing options...
Deadeye Dillard Posted November 11, 2019 Author Share Posted November 11, 2019 3 hours ago, willie GOODNEWS said: I’ll take magma 2 cavity 1 set 38-40 180 gr RNFP 45-70 300 gr FP/BB Let me know where to send the money Pm sent Link to comment Share on other sites More sharing options...
RIDGE WALKER Posted November 11, 2019 Share Posted November 11, 2019 An amazing opportunity!! Hope you can get the bulk of it sold to one buyer. Link to comment Share on other sites More sharing options...
Deadeye Dillard Posted November 16, 2019 Author Share Posted November 16, 2019 Bump for the week, only moved a few molds so far. Have a good weekend! Link to comment Share on other sites More sharing options...
Iron Tomahawk Kid Posted November 17, 2019 Share Posted November 17, 2019 Hey Dillard just wondering if you're single mold caster is fully automatic or manual Tomahawk Link to comment Share on other sites More sharing options...
Deadeye Dillard Posted November 18, 2019 Author Share Posted November 18, 2019 17 hours ago, Iron Tomahawk Kid said: Hey Dillard just wondering if you're single mold caster is fully automatic or manual Tomahawk Hey Tomahawk, It does have an attachment that moves the arm to each position automatically. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.