GPG Posted October 18, 2013 Share Posted October 18, 2013 I am looking for a 6 cavity mold for the 105gr TC but it doesnt appear anyone makes this mold. Magma has a 2 cavity of this style that has crimp groove in the correct spot to load 38 cases and it works great but dont offer a 4 or 6 cavity. Any leads on this specific mold type would be greatly appreciated. thank you Link to comment Share on other sites More sharing options...
J-BAR #18287 Posted October 18, 2013 Share Posted October 18, 2013 Check with Dick Dastardly at Big Lube Bullets. He has one that works fine for both black powder or smokeless. In my experience it drops a bit heavier than 105 though. Link to comment Share on other sites More sharing options...
Springfield Slim SASS #24733 Posted October 18, 2013 Share Posted October 18, 2013 accuratemolds.com should have something. If not he will cut you a custom mould. Link to comment Share on other sites More sharing options...
Garrison Joe, SASS #60708 Posted October 18, 2013 Share Posted October 18, 2013 accuratemolds.com should have something. If not he will cut you a custom mould. Yep, sounds like you might just like the Accurate #36-105B. Ask for it to drop at 0.359" in the alloy you normally cast. Unless you just want to tumble lube and shoot it unsized. Here's his "stock" catalog page, clik the design for dimensions all around: http://www.accuratemolds.com/catalog.php?page=4 He can probably do a 4 cavity in Aluminum, and you will be very pleased with it. Good luck, GJ Link to comment Share on other sites More sharing options...
Dirty Chris Posted October 18, 2013 Share Posted October 18, 2013 +1 for Accurate molds. Pick one of his designs or design one yourself. I think he can do up to 5 cavities in an aluminum mold. Link to comment Share on other sites More sharing options...
August West, SASS #45079 Posted October 18, 2013 Share Posted October 18, 2013 Check with Dick Dastardly at Big Lube Bullets. He has one that works fine for both black powder or smokeless. This ^^^^^. http://www.biglube.com/BulletMolds.aspx?ItemID=ebcdc217-f282-40a1-92ba-ca09fa487426 Link to comment Share on other sites More sharing options...
Bramble Mountain Buzzard Posted October 18, 2013 Share Posted October 18, 2013 Reality is, there isn't enough difference between a 105 and 120 grain to matter. You can "make" your 120 into a 105 by dropping .2 grains of powder... Buzzard Link to comment Share on other sites More sharing options...
GPG Posted October 19, 2013 Author Share Posted October 19, 2013 Thanks for your help here. I have found what I need at Accurate. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.