BrimstoneJerome Posted January 13, 2011 Share Posted January 13, 2011 Saw this on e-bay, says it will: "Change instantly from 38 Special to 357 Magnum and back OR from 44 Special to 44 Magnum and back without a 2nd toolhead. Installs exactly like a factory toolhead." Does anyone have any info or a review of this product? Link to comment Share on other sites More sharing options...
Colorado Coffinmaker Posted January 13, 2011 Share Posted January 13, 2011 First time I've heard of it. Anybody else?? Coffinmaker Link to comment Share on other sites More sharing options...
Al OVERA, SASS#26238 Life Posted January 13, 2011 Share Posted January 13, 2011 Saw this on e-bay, says it will: "Change instantly from 38 Special to 357 Magnum and back OR from 44 Special to 44 Magnum and back without a 2nd toolhead. Installs exactly like a factory toolhead." Does anyone have any info or a review of this product? Long as you stay in the same family (.38/.357), (.44/.44MAG) all you need do is adjust the depth of the bell, seat, crimp dies and you're good to go. Couldn't be much simpler. MHO Al Link to comment Share on other sites More sharing options...
Ranger Sgt. Jake McCandless #3368 Posted January 14, 2011 Share Posted January 14, 2011 Unless it is the spacer washers for the dies,to go from 38 spl. to 357 mag. or 44 spl. to 44 mag. Adios Sgt. Jake Link to comment Share on other sites More sharing options...
Timber Rattler Posted January 14, 2011 Share Posted January 14, 2011 Pretty neat put the tool head shaped spacer on top for 38 move it to the bottom for 357. Never used one but it should work I think! Course the wife say's I been wrong several times,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,A day!! Link to comment Share on other sites More sharing options...
Chisler Wood Posted January 14, 2011 Share Posted January 14, 2011 Link to comment Share on other sites More sharing options...
Cpt Dan Blodgett, SASS #75655 Posted January 14, 2011 Share Posted January 14, 2011 Incredibly simple concept. It has taken how many years for someone to come up with that bit of inspiration. Hope he is not too greedy but actually makes a mint on it Link to comment Share on other sites More sharing options...
BrimstoneJerome Posted January 14, 2011 Author Share Posted January 14, 2011 Incredibly simple concept. It has taken how many years for someone to come up with that bit of inspiration. Hope he is not too greedy but actually makes a mint on it This fella should have been marketing to CAS shooters since day 1. Link to comment Share on other sites More sharing options...
Marshal Phil DeGrave SASS #55202 Posted January 14, 2011 Share Posted January 14, 2011 If I remember correctly, he is asking $55.00 for just the toolhead (spacer included). That's right in line with buying two dillon tools heads, but you only need one set of dies with the other deal. I've been tempted to try one. I haven't heard if it actually works. Link to comment Share on other sites More sharing options...
Buffalo Dick, SASS #12880 Posted January 15, 2011 Share Posted January 15, 2011 I load .45 Colt and Schofields on my 650 and when switching between the two I know to adjust the powder station, seating and crimp dies 2 1/2 turns-nothing tough or time-consuming about that. I have index marks on the dies with a sharpie and the whole process takes a couple of minutes. $55 buys a lot of components. It is a clever idea though. Link to comment Share on other sites More sharing options...
Colorado Coffinmaker Posted January 15, 2011 Share Posted January 15, 2011 Neat Video and Nifty idea. I admit to being lazy when I reload, so I already have the different tool heads and dies for everything I reload (two presses - small primer & large primer) or I would be real interested in the guys product. Not a bad price either. Coffinmaker Link to comment Share on other sites More sharing options...
Foard County News, SASS #77236 Posted January 15, 2011 Share Posted January 15, 2011 Its a neat idea and if I were shooting 38/357 I would think about. What I really need is one that goes from 45 to 38... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.