Turquoise Bill, SASS #39118 Posted June 13, 2023 Posted June 13, 2023 How hard is it to remove the firing pin and recoil bushing? Looks like a long thin pin that goes through the frame and comes out by the loading gate. TB
KingSnake Posted June 13, 2023 Posted June 13, 2023 Mark the pin orientation on the outside of the frame. Mark the recoil bushing orientation also. Drive the pin out from the loading gate area. Use a brass punch to drive out the recoil bushing. Or if you want to drive over the mountain, give it to me and I’ll do it for you.
Larsen E. Pettifogger, SASS #32933 Posted June 13, 2023 Posted June 13, 2023 Page 22 https://www.sassnet.com/uploads/downloads/cowboychronicle/2013/13Janchron2.pdf
Turquoise Bill, SASS #39118 Posted June 14, 2023 Author Posted June 14, 2023 Thanks guys, that's what I thought, Larsen, thanks for the historical link to the Chronicle article. I didn't remember that one. TB
Recommended Posts
Archived
This topic is now archived and is closed to further replies.