Jump to content
SASS Wire Forum

CZ coach gun firing problem


Tarheel Doc

Recommended Posts

Posted

I have a CZ coach gun with a firing problem. Trying to figure out this issue. When I fire the first barrel the firing pin for the second barrel indents the primer on the second shell but does not allow me to shoot the second barrel. I have taken apart and cleaned the internal parts. Nothing seems to help. Anyone had this issue? Thanks 

Posted

I would look at the small spring that fits on top of the left cam that has the sear cut into it. It sounds like it has been made weaker by someone "tunning" the gun, and the hammer is falling off when the right barrel fires.

Posted

In my experience, CZ customer service is terrific.  You might contact CZ in Kansas City and see if they can help.

Posted

It would be my guess that the second barrel is not cocking and firing the first barrel gives enough recoil to overcome the return spring on the second firing pin, thus marking the primer on the second barrel.

When dry firing, do both hammers fall?

J.M

Posted

Yes when dry firing both pins fall. I took the stock off and watched as I pull the trigger. It operates as it should then. It only happens when I fire a live round. 

Posted

The left side is falling off the sear during recoil. Put a stronger little spring at the top of the cam.

Posted

I took that spring out and reinstalled it and for whatever reason this has resolved the issue. Just shot 26 rounds and no issues. Thanks for the advice. 

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.