Tom Bullweed Posted October 3, 2021 Share Posted October 3, 2021 I inherited my Dad's Chikom Type 51 7.62x25 semi-auto pistol, a near copy of the Russian Type 33 Tokarev. Dad acquired said pistol in Hue in early 1968. Nuff said. He shot and carried the gun for decades but rarely cleaned it. Now I need to either get another barrel (preferred) or get the barrel relined. Any of you cowboys have ideas on parts or a gunsmith? Link to comment Share on other sites More sharing options...
Pat Riot Posted October 3, 2021 Share Posted October 3, 2021 Information that may help. I do not know much about these guns. https://www.militaryfactory.com/smallarms/detail.php?smallarms_id=100 Not sure if this will work but here are parts for the TT33, which is supposed to be the same as the Type 51. Barrel $60. https://www.gunpartscorp.com/gun-manufacturer/tokarev/auto-pistols-tok/tt33 Link to comment Share on other sites More sharing options...
Texas Joker Posted October 3, 2021 Share Posted October 3, 2021 I haven't played in the C&R arena in a while but before the milsurps dried up J&G SALES, Sarco and Numrich were go to's for milsurp toks Link to comment Share on other sites More sharing options...
DeaconKC Posted October 4, 2021 Share Posted October 4, 2021 Most Tok's will have drop in barrels. Loose Communist tolerances but can be surprisingly good shooters due to good design lockup at the muzzle. Keep an eye out for replacement firing pins and an occasional 9x19 barrel will pop up. Good sights and some have good triggers. Very usable sights Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.