ACW Posted December 8, 2020 Share Posted December 8, 2020 I need some 24 gauge brass shotgun shells. Link to comment Share on other sites More sharing options...
Dusty Morningwood Posted December 8, 2020 Share Posted December 8, 2020 29 minutes ago, ACW said: I need some 24 gauge brass shotgun shells. I looked forever. Then a guy on Gunboards sold me two boxes. I have heard that Magtech will run more in April. Link to comment Share on other sites More sharing options...
Okiepan Posted December 8, 2020 Share Posted December 8, 2020 Must be for that British round ? Link to comment Share on other sites More sharing options...
ACW Posted December 8, 2020 Author Share Posted December 8, 2020 1 minute ago, Okiepan said: Must be for that British round ? Yes they will be for a .577 Snider Enfield Link to comment Share on other sites More sharing options...
Okiepan Posted December 9, 2020 Share Posted December 9, 2020 Mine are for my Martini I am looking for a snider as well , lucky you Link to comment Share on other sites More sharing options...
ACW Posted December 9, 2020 Author Share Posted December 9, 2020 I did find some plastic 24 gage shells that I'll use to load .600 round balls. I've heard that a round ball is more accurate a 100 yards than a conical bullet - in a Snider I'd still like to find some brass ones. Link to comment Share on other sites More sharing options...
ACW Posted January 6, 2021 Author Share Posted January 6, 2021 Bump - Still looking for some Link to comment Share on other sites More sharing options...
trvlrmn Posted January 6, 2021 Share Posted January 6, 2021 PM sent. Link to comment Share on other sites More sharing options...
ACW Posted January 12, 2021 Author Share Posted January 12, 2021 Found some and no longer will need any. Link to comment Share on other sites More sharing options...
Fort Reno Kid Posted January 22, 2021 Share Posted January 22, 2021 Howdy Pard Glad you found what you’re looking for. I have a 577 Snider Carbine and can share some thots with you about their care and feeding. I special ordered a .59 cal minie bullet mould for it but found the Lee .60 cal round ball mould to give better results. I paid an arm and half a leg for some Bertram and Jamison brass cases but found the plastic Cheddite (French) hulls to be easier to work with. With plastic hulls it’s easy to use a mild load of black powder (my preference is Pyrodex), push down a heavy wad to eliminate any air space and then seat the round ball firmly on top with some lube or gear grease on top of the projectile as add’l lubrication. Graf & Sons and Track of the Wolf periodically stock reloading components for 24 gauge. A good website for Snider and Martini-Henry (and, for that matter, all British weaponry) is the British Militaria Forum. You can benefit from info with shooters from the US as well as Canada and other shooters from the British Commonwealth. Don’t know if you plan to shoot it at a SASS match. The Sniders are slow to reload but should win you some fierce style points. When you touch off one of those rounds at a shooting range, you’ll draw a crowd in a hurry. Enjoy that old smokepole! Adios Fort Reno Kid Link to comment Share on other sites More sharing options...
ACW Posted February 25, 2021 Author Share Posted February 25, 2021 Hi Pard, Sorry for the delay in responding to your info - I have 2 Sniders, A Mk III put together in Nepal and one made in England. I just got in some MagTech 24 ga brass cases and looking forward to adjusting their length using my lathe. I first need to make a holder so they will be cut properly. I'm going to try a .600 round ball, a Rapine 577-510 minie, and a X-Ring 60-530XR to try out. The one most accurate at 100+ yards will be what I'll use. Lets hope one of the Sniders works well. Au revoir, AWC Link to comment Share on other sites More sharing options...
Dusty Morningwood Posted February 25, 2021 Share Posted February 25, 2021 In case anyone is looking, Graf and Sons has them in stock, at least as of yesterday. I bought two boxes - and I don't even have a gun to use them in! LOL. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.