Chili Ron Posted March 14, 2012 Share Posted March 14, 2012 Howdy, I had a chance to try the ruger setup with the new lower hammer. It allowed me to control the revolver better but my question: can any of the lower hammers be put on the ruger three screw blackhawks? This would have to be a 100 percent reversable change as this would probably lower the value otherwise. Thanks aheadotime. Best CR Link to comment Share on other sites More sharing options...
Chuckaroo #13080 Regulator Posted March 14, 2012 Share Posted March 14, 2012 My guess would be no. There are more notches in the 3 screw hammer. You would not have the notch used for loading a three screw. I am sure there are some experts here that can verify that. Link to comment Share on other sites More sharing options...
Rex M Rugers #6621 Posted March 14, 2012 Share Posted March 14, 2012 The Super Blackhawk hammer from a three-screw Super will fit a three-screw Blackhawk. Might be waaaayyyyy hard to find , though. Good luck , Rex Link to comment Share on other sites More sharing options...
Wyandot Jim Posted March 14, 2012 Share Posted March 14, 2012 The Super Blackhawk hammer from a three-screw Super will fit a three-screw Blackhawk. Might be waaaayyyyy hard to find , though. Good luck , Rex Yep they will work. Except the 357 frame is the Mid. size and the Super is the large. Super hammers go for around $150 each.. You can have some made as I did for my Ruger Old Armys for about $70 Ea. Don't worry about the value, because it's a shooter. The hammers would help the value. Wyandot http://i277.photobucket.com/albums/kk67/wyandotjim/1330559475.jpg Here are some that were made for 3 SCREW Vaqueros. http://i277.photobucket.com/albums/kk67/wyandotjim/1323800489.jpg Link to comment Share on other sites More sharing options...
Guest Tommy Reb Posted March 14, 2012 Share Posted March 14, 2012 I have old model, three screw Super Blackhawk hammers on both my old model, three screw 357 Blackhawks. And, of course, that change is 100% reversible. If I recall correctly, I got mine by placing a WTB ad on the Ruger Forum. Good luck. TR Link to comment Share on other sites More sharing options...
BrimstoneJerome Posted March 14, 2012 Share Posted March 14, 2012 Yep they will work. Except the 357 frame is the Mid. size and the Super is the large. Super hammers go for around $150 each.. You can have some made as I did for my Ruger Old Armys for about $70 Ea. Don't worry about the value, because it's a shooter. The hammers would help the value. Wyandot http://i277.photobucket.com/albums/kk67/wyandotjim/1330559475.jpg Here are some that were made for 3 SCREW Vaqueros. http://i277.photobucket.com/albums/kk67/wyandotjim/1323800489.jpg Those are some of the coolest guns I've ever seen. Link to comment Share on other sites More sharing options...
Guest Chief Posted March 14, 2012 Share Posted March 14, 2012 I used the hammers off the 3 screw 22, tang was quite a bit lower and made it real easy for small hands, dropped right in. Chief Link to comment Share on other sites More sharing options...
Wyandot Jim Posted March 14, 2012 Share Posted March 14, 2012 I used the hammers off the 3 screw 22, tang was quite a bit lower and made it real easy for small hands, dropped right in. Chief Ya might want to read the rule book on that one. That is a No No Link to comment Share on other sites More sharing options...
Guest Chief Posted March 14, 2012 Share Posted March 14, 2012 Ya might want to read the rule book on that one. That is a No No Wyandot Jim: I really don't care what the rule book says I please my self. after all it is supposed to be for enjoyment. Chief Link to comment Share on other sites More sharing options...
Wyandot Jim Posted March 14, 2012 Share Posted March 14, 2012 Wyandot Jim: I really don't care what the rule book says I please my self. after all it is supposed to be for enjoyment. Chief Yea, I hear ya. That is why I shoot 32 Single-Sixes when I'm shooting BP Dulist. Just don't get called on it at major match. Pretty easy to tell when the hammer is 1/2" or so below the frame Wyandot Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.