Preacherman Posted October 3, 2020 Share Posted October 3, 2020 Lee Bullet Sizing Kit for sale. Size .401. $15 delivered. Thanks! Preacherman Lee says Fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Lee Liquid Alox and Reloading Press sold separately. *Special note: Intended for use on single stage presses only. The push through punch is used in place of a shell holder in the ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox (sold separately), push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on. For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter. Link to comment Share on other sites More sharing options...
Preacherman Posted October 4, 2020 Author Share Posted October 4, 2020 2 are sold, list is updated Link to comment Share on other sites More sharing options...
Preacherman Posted October 9, 2020 Author Share Posted October 9, 2020 Up again Link to comment Share on other sites More sharing options...
Preacherman Posted October 14, 2020 Author Share Posted October 14, 2020 I will entertain reasonable offers. Thanks Link to comment Share on other sites More sharing options...
Preacherman Posted October 21, 2020 Author Share Posted October 21, 2020 Up again Link to comment Share on other sites More sharing options...
Reuben McCoy Rankin # 34239 Posted October 21, 2020 Share Posted October 21, 2020 Ill take the .430 for $20.00 Link to comment Share on other sites More sharing options...
Preacherman Posted October 21, 2020 Author Share Posted October 21, 2020 PM sent to Reuben Link to comment Share on other sites More sharing options...
Preacherman Posted October 29, 2020 Author Share Posted October 29, 2020 Please, make offers. I want these to go to a good home. Link to comment Share on other sites More sharing options...
Preacherman Posted October 31, 2020 Author Share Posted October 31, 2020 one last try, 2 left Link to comment Share on other sites More sharing options...
Chert Rock Chuck Posted October 31, 2020 Share Posted October 31, 2020 I’ll take .356 Link to comment Share on other sites More sharing options...
Preacherman Posted October 31, 2020 Author Share Posted October 31, 2020 PM sent Link to comment Share on other sites More sharing options...
Preacherman Posted November 23, 2020 Author Share Posted November 23, 2020 lower price Link to comment Share on other sites More sharing options...
J. Mark Flint #31954 LIFE Posted November 24, 2020 Share Posted November 24, 2020 I'll give the .401 kit a good home. PM me for adoption fee Link to comment Share on other sites More sharing options...
Preacherman Posted November 24, 2020 Author Share Posted November 24, 2020 Hi Mark, tried to pm and it says that you can't receive messages. Maybe email me. My email is on my profile. Let me know. Thanks, Preacherman Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.