Jump to content
SASS Wire Forum

Tuning and tweaking the Remington 1858?


Neuse Rivers

Recommended Posts

ya might try https://www.full30.com/channels/duelist, Mike may be of help or he may know someine who knows what yer looking for?

TRBill

+1

Link to comment
Share on other sites

If it's a Pietta throw it in the Lake ,,,,,, If it's a Uberti get yourself a piece of Glass 1/2 thick

one foot square and some Emory Cloth sheets in 400, 600, 800 grit...

And polish any burrs of parts keeping parts flat and even ... I also have a piece of glass 3/4 x 3/4 by 12 inches and ceramic rods of 1/4 , 3/8 ,1/2 and 5/8 inch by one foot long ... The glass is wrapped

with Emory cloth and used to polish and the ceramic rods are used as is to polish parts ...

When I am done with the 800 grit I coat it with "Fritz" metal polish to finish things up...

 

The object is not to remove a lot of metal but to make thing really smooth ...

 

If you don't understand what I'm saying or you don't understand how the gun in question is meant to

Work, send to a Smith ,,,,,, We got to eat too ...

 

Jabez Cowboy

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.