Judge Lewis Posted April 21, 2015 Share Posted April 21, 2015 My shooting pard, Slate Mike, decided to do a trigger job on his Rossi '92. I was surprised that he tackled it as he has been quite ill and in currently in the hospital. He was able to get the stock off and the first screw to remove the trigger group. But he couldn't get it out so I took it to my friendly gunsmith who got it done. The problem is that I can't find the screws that Mike removed and the gunsmith doesn't have any screws that will fit. I have tried the Rossi site and Midway but no luck. Any ideas? Thanks. Link to comment Share on other sites More sharing options...
Frosty Posted April 22, 2015 Share Posted April 22, 2015 http://www.stevesgunz.com/index.htm Link to comment Share on other sites More sharing options...
Judge Lewis Posted April 22, 2015 Author Share Posted April 22, 2015 Thanks Frosty. I did check Nate's site but didn't find any replacement screws. Link to comment Share on other sites More sharing options...
Sedalia Dave Posted April 22, 2015 Share Posted April 22, 2015 Send Nate a PM He likely has screws but not something he normally sells. You can also call Rossi USA. Odds are they will send you the screws. Link to comment Share on other sites More sharing options...
Chili Ron Posted April 22, 2015 Share Posted April 22, 2015 Howdy, Don't check the sites, call folks and ask actual human folks. I once lost a screw from a ruger and they shipped me another no charge. The new one had a little plastic plug that probably stayed better. Sort of an as needed upgrade. A drop or two of purple locktite might be a good thing too. local auto store didn't stock purple but had in a day or two. It wouldn't cost a whole lot to get a full set of spare screws. If you have spares you will never need em.... Best CR Link to comment Share on other sites More sharing options...
Fairshake Posted April 24, 2015 Share Posted April 24, 2015 Contact Mike at M&M Gunsmithing in Alabama. He was the head Gunsmith for Rossi when they were imported by Interarms in Alexander, Va. He is now located at the following address and number. He has a lot of Rossi rifle parts. Good Luck David M&M Gunsmithing 2423B Carter Grove Rd. Hazel Green, Al. 35750 phone # 571-276-7676 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.