Augustus Nichols

I'll take it. Pm incoming

Looking for a couple of Ruger nmv bisley triggers and hammers. Stainless if possible. Mainly looking for triggers but wouldn't mind a couple extra hammers

I'll take it per our pm's

I found quickly this Cimarron needs to be ran with authority as well

Just got mine in this weekend and went straight to work on trying to get it to hold 6. By the time I got it to hold 6 and close easily, the spring wasn't putting enough pressure on the follower to cycle the last shell. Ordered one of the extra power Wolf springs and cut it about the same length Deuce cut the spring he used in the above video. Works perfectly now loading 5 in the tube with one on the carrier. No failures with dummies or loaded rounds (safely checked of course)

PM sent

Traded! 5.5" .45 vaqueros. Sbh hammers (have the originals). Some light holster wear but great, smooth pistols in good shape. Shoot and feel great, but have found the Bisleys point better for me. Asking $1600.00 for the pair. Couple of possible trades. Ss NMV Bisley, short stroked 73 in 45, maybe others

Planned on it lol Double checked everything. Timing is pretty darn spot on

Took it apart again to check the plunger, it was working as it should. Re assembled and same thing. Dug through my spare parts to see what I had to try and found a used pawl. Swapped them out and the gun works now. I don't see anything visually wrong with the one that came out of it but it works now

Yessir, 2nd thing I checked after spring position

Nope, same thing.......

Was doing a spring swap this evening on a Bisley NMV and while I was in there, removed to indexing detent for free spin. Re assembled the gun and now when I open the gate, the cylinder wont turn unless I pull back the hammer just a touch, and will not turn counter clockwise at all. I've checked the gate spring (it's in place) and checked bolt drop with the gate open and it is retracted as it should be. Rotation with the hammer is fine, trigger is fine. I've taken it apart 3 times and reinstalled everything and still doing it. Any ideas that I may be missing??

Looking for 2 pair of the factory white Ruger NMV Bisley grips. Thought someone might have some laying around.

Only looking for one more

Looking for a 72 army open top in 45 (Colt or Schofield). Just got one and love it. Looking to pair it up with another. Thanks

That was kind of my point. I DONT have all the extra mechanical resistance of the rods, springs etc and mine still wouldn't open. Mostly, because of the extractor.

I have the hammered version which, theoretically, should fall open since there are no cocking rods etc. Practically had to break it open over my knee when I first got it. The main culprit? The extractor. The main extractor rod and the guid rod were about 10° out of parallel. The main shaft and channel were horribly rough and tight. Cleaned up those issues and gun falls open now

Nothing at this time, actually meant to close this thread and forgot.

Ttt

Also, you can use double snaps, but, on the lanyard end I use Chicago screws to hold the lanyard and cover and allow both to pivot

That's all I do, but, you'll have to turn down the diameter of the head to fit inside the snap. I use a cordless drill for the screw and a dremel with a sanding drum to sand the head down.

Amazon. They're just Tandy leather snaps but instead of the stem connector for leather, I use a cut down wood screw to attach to the wood

Honestly don't know. Garage sale bar stool lol

I got mine from Amazon. Search lobster clasp or lobster swivel and leather snaps