Roger Rapid Posted June 23, 2021 Share Posted June 23, 2021 Anyone know of a bullet maker who is using the Lyman RNFP mold for .38-40 bullets? RR Link to comment Share on other sites More sharing options...
Garrison Joe, SASS #60708 Posted June 23, 2021 Share Posted June 23, 2021 Did you check Springfield Slim's site? http://hstrial-mwhyte2.homestead.com/ He does lots of older, BP compatible designs, and they work well as smokeless bullets, too. Are you sure you need one particular Lyman mold design? And if you are, what mold number, as Lyman probably has made 10 or more 38-40 RNFP molds over the years. Lyman 401043 or some other mold? good luck, GJ Link to comment Share on other sites More sharing options...
Garrison Joe, SASS #60708 Posted June 23, 2021 Share Posted June 23, 2021 Montana Bullet Works https://www.montanabulletworks.com/product/3840-lyman-401043-175gr-fn-pb/ Buffalo Arms https://www.buffaloarms.com/401-180-grain-fn-hand-cast-b-401043.html (both out of stock, as many bullet casters are currently due to "The Panic of 2020") good luck, GJ Link to comment Share on other sites More sharing options...
John Boy Posted June 24, 2021 Share Posted June 24, 2021 One day to buy a 38-40 bullet mold …. https://www.ebay.com/itm/274839024643?hash=item3ffdaeb403:g:cv0AAOSw4ktgsl~q Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.