levi littleton Posted June 4, 2019 Share Posted June 4, 2019 I have a pair of turned down hammers that came out of an unfired pair of guns. Cone firing pins. These are color cased. They should drop right in and work in any USA built USFA gun. $350 shipped priority mail for the pair. Pay Pal via F&F or a personal check is fine. Longhunter was the only supplier of these originally: "The lower contour is easier to reach for the one handed shooter and provides quicker shot to shot strings for the two handed shooter. With the hammer at rest, the sights are still in full view unlike the old style hammer where the sights are hidden. This means you never have to lose the sight picture again after the shot." Standard hammer over laid on the USFA turned hammer. Link to comment Share on other sites More sharing options...
MBFields Posted June 4, 2019 Share Posted June 4, 2019 I will take them. I can do paypal if you like. Link to comment Share on other sites More sharing options...
levi littleton Posted June 4, 2019 Author Share Posted June 4, 2019 -sold- thank you Sir. I still have a pair of color cased hammers available... Link to comment Share on other sites More sharing options...
Springfield Slim SASS #24733 Posted June 4, 2019 Share Posted June 4, 2019 Why is this called a turned down hammer? It was not done on a lathe. Lowered is a less confusing term. IMHO Link to comment Share on other sites More sharing options...
levi littleton Posted June 4, 2019 Author Share Posted June 4, 2019 The reason they are called "turned down" is because the original design came from hammers that had the spur turned down by using a torch, a hammer and anvil. Hammers were never turned down on a lathe. The ones that just sold were cut from a pattern made by USFA using a original hammer that the spur was bent down with heat and leverage. I have a 2nd pair of turned down hammers for sale. These are color cased. $350 shipped priority mail for the pair. Link to comment Share on other sites More sharing options...
levi littleton Posted June 27, 2019 Author Share Posted June 27, 2019 btt Link to comment Share on other sites More sharing options...
levi littleton Posted July 3, 2019 Author Share Posted July 3, 2019 SPF..thanks! Link to comment Share on other sites More sharing options...
levi littleton Posted September 13, 2019 Author Share Posted September 13, 2019 I have one last pair of new, color cased, factory USFA hammers for sale. $350 shipped Link to comment Share on other sites More sharing options...
workin on alias Posted September 13, 2019 Share Posted September 13, 2019 I'll take a pair. Link to comment Share on other sites More sharing options...
levi littleton Posted September 13, 2019 Author Share Posted September 13, 2019 Last pair SPF to W-on-A Pm sent. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.